Digital Projection Projector M-Vision Cine 3D Series User Manual

							
Rev A  August 2011
M-Vision Cine 3D series
High Brightness Digital Video Projector 
16:9 widescreen display
OPERATING GUIDE
112-022A 
						

							
Digital Projection M-Vision Cine 3D series  CONTENTS  Operating Guide
Rev A  August 2011
CONTENTS
About this Guide ........................................................................\
...................1
Symbols used in this guide ........................................................................\
..1
Warnings.........................................................................\
............................1
Notes.........................................................................\
..................................1
Product revision  ........................................................................\
....................1
Using the Menus  ........................................................................\
...................2
Navigating the menus ........................................................................\
...........2
Submenus ........................................................................\
..............................3
Selecting parameters ........................................................................\
............4
Sliders  ........................................................................\
....................................5
Commands ........................................................................\
.............................5
A Tour of  the Menus  ........................................................................\
...........6
Main Menu ........................................................................\
..............................6
Aspect.Ratio.........................................................................\
.......................6
Presets.........................................................................\
...............................7
Brightness,.Contrast,.Saturation,.Hue,.Sharpness.and.Noise.Reduction...8
Overscan.........................................................................\
............................8
Input.Select.........................................................................\
........................8
Resync.........................................................................\
...............................8
3D.Settings.........................................................................\
.........................8
Advanced Menu ........................................................................\
.....................9
Color.Space.........................................................................\
.......................9
Gamma,.Color. Temperature.and.Color.Gamut...........................................9
Brilliant.Color®.and. Adaptive.Contrast........................................................9
Fine.Sync.........................................................................\
...........................9
RGB.Adjust.........................................................................\
.........................9
System Menu ........................................................................\
.......................10
Language.........................................................................\
.........................10
Menu.Position.........................................................................\
..................10
Blank.Screen.........................................................................\
....................10
Auto.Power.Off.........................................................................\
.................10
Auto.Power.On.........................................................................\
.................10
Rear.Projection.........................................................................\
................11
Ceiling.Mode.........................................................................\
....................11
Lamp.Power.........................................................................\
.....................11
Control Menu  ........................................................................\
.......................12
Keys.1.to.5.........................................................................\
.......................12
Trigger.1.and.2.........................................................................\
.................12
Auto-Source.........................................................................\
.....................12
Service Menu ........................................................................\
.......................13
Information.........................................................................\
.......................13
Factory.Reset.........................................................................\
...................13
Blue.Only.........................................................................\
..........................14
Test.Patterns.........................................................................\
....................14
Altitude.........................................................................\
.............................14
Menu Map  ........................................................................\
................................15
MAIN ........................................................................\
.....................................15
ADVANCED  ........................................................................\
..........................15
SYSTEM........................................................................\
................................16
CONTROL ........................................................................\
.............................16
SERVICE ........................................................................\
...............................16 
						

							
Digital Projection M-Vision Cine 3D series  ABOUT THIS GUIDE  Operating Guide
Page 1Rev A  August 2011
About this Guide
Please.read.this.guide.carefully.before.using.the.projector,.and.keep.it.handy.for.future.reference.
A.serial.number.is.located.on.the.side.of.the.projector..Record.it.here:.
Symbols used in this guide
Warnings
 ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
 WARNING: this symbol indicates that there is a danger of physical injury \
to yourself and/or damage to the equipment unless 
the instructions are closely followed.
Notes
  NOTE: this symbol indicates that there is some important information that you should read.
Product revision
Because.we.at.Digital.Projection.continually.strive.to.improve.our.products,.we.may.change.specifications.and.designs,.and.add.new.features.
without.prior.notice..Projectors.built.prior.to.this.revision.of.the.Operating.Guide.may.therefore.not.include.all.the.features.described. 
						

							
Digital Projection M-Vision Cine 3D series  1. USING THE MENUS  Operating Guide
Page 2Rev A  August 2011
Using the Menus
Use.the.buttons.on.the.projector.control.
panel.or.on.the.remote.control,.to.access.the.
menu.system.
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded green on the actual menu.
Remote controlProjector control panel
Navigating the menus
To.open.another.menu,.first.close.the.
current.menu.by.pressing.MENU,.
Select.another.menu.using
.and,
•
•
To.open.or.close.the.on-screen.display.
(OSD),.press.MENU.
The.first.item.in.the.menu.is.highlighted.
(When.closing.the.OSD,.you.may.need.
to.press.MENU.more.than.once.if.any.
sub-menus.are.open.)
•
.Select.an.item.in.the.menu.using
.and.
•
then.press.ENTER/SELECT.
The.first.item.in.the.new.menu.is.
highlighted.
• 
						

							
Digital Projection M-Vision Cine 3D series  1. USING THE MENUS  Operating Guide
Page Rev A  August 2011
Submenus
Select.a.submenu.using
.and.
then.press.ENTER/SELECT.
•
•
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded green on the actual menu.
The.submenu.opens,.with.the.first.item.
highlighted.
•
To.close.the.submenu,.press.MENU.• 
						

							
Digital Projection M-Vision Cine 3D series  1. USING THE MENUS  Operating Guide
Page Rev A  August 2011
Selecting parameters
Most.parameters.are.changed.by.selecting.
from.a.list:
Select.from.the.list.using
.and..
The.change.will.be.made.immediately.
•
•
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded green on the actual menu.
Some.parameters.are.changed.by.selecting.
from.a.submenu.
Press.ENTER/SELECT.to.open.the.
submenu.
The.item.that.is.currently.selected.is.
highlighted.with.a.green.dot..
Select.from.the.list.using
.and.
The.change.will.be.made.when.you.
press.ENTER/SELECT.to.confirm.the.
selection.
•
•
•
• 
						

							
Digital Projection M-Vision Cine 3D series  1. USING THE MENUS  Operating Guide
Page Rev A  August 2011
Sliders
Activate.the.slider.by.pressing
.or..
•
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded green on the actual menu.
Commands
To.use.a.command,.press.ENTER/
SELECT.
In.the.example.below,
use..or.to.select.YES.or.NO,
then.press.ENTER/SELECT.to.confirm.
your.selection.
•
•
Use..or.to.adjust.the.value.
Press.MENU.or.ENTER/SELECT.to.
accept.the.value.
•
• 
						

							
Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page Rev A  August 2011
A Tour of  the Menus
Main Menu
Aspect Ratio
Use..or..to.choose.between.16:9,.Theaterscope,.4:3,.4:3 Narrow.and.Native.
Examples
•
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
 The Native image examples shown 
here have far fewer pixels than 
the 1920 x 1080 of the DMD. Your 
image may be different.
 When displaying a 1:9 image, DO 
NOT use an anamorphic lens.
1:9 image using Native setting1:9 image using 16:9 setting
: image using Native setting: image using 4:3 setting 
						

							
Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page Rev A  August 2011
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
 An anamorphic lens is used 
with the Theaterscope setting, to 
ensure that for a 2.35:1 image, the 
maximum area of the DMD is used, 
giving maximum image brightness.
 The 4:3 Narrow setting is used to 
compensate for the distortion that an 
anamorphic lens would cause to a 
: image.
 When displaying a 1:9 image, DO 
NOT use an anamorphic lens.
Main MenuPresets
 Presets A, B and C can also be 
recalled using the USER MEMORY 
keys on the remote control.
  Note: Preset D is available only 
through the Preset menu, not 
through the remote control.
 When Save Presets is selected, 
the image settings for ONLY the 
selected input are saved.
4:3 Narrow without anamorphic lens4:3 Narrow with anamorphic lens
2.:1 image using 16:9 setting 
without anamorphic lens
2.:1 image using Theaterscope setting 
without anamorphic lens
Examples with anamorphic lens
2.:1 image using Theaterscope setting 
with anamorphic lens
Presets
The.current.image.settings.can.be.saved.to.one.of.four.Presets.. Any.of.the.four.Presets.or.the.Default.settings,.can.be.recalled.later.•
The.following.settings.are.saved:
From.the.Main.menu:
Aspect Ratio Brightness 
Contrast Saturation  
Hue Sharpness 
Noise Reduction Overscan
From.the.Advanced.menu:
Color Space Gamma 
Colour Temperature Color Gamut 
RGB Offsets RGB Gains 
Brilliant Color Adaptive Contrast
• 
						

							
Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page 8Rev A  August 2011
Brightness, Contrast, Saturation, Hue, Sharpness and Noise Reduction
Adjust.the.sliders.for.these.settings.
Overscan
Choose.from.Off,.Crop.or.Zoom.
Input Select
Choose.which.input.source.to.display.
Resync
Press.ENTER/SELECT.to.force.the.projector.to.re-synchronise.with.the.current.input.signal.
3D Settings
Press.ENTER/SELECT.to.open.the.3D.settings.sub-menu.
Set.3D Enable.to.On.or.Off.
Set.3D Type.to.suit.the.configuration.of.the.3D.input.signal.
Set.DLP Link.to.On,.if.you.are.using.3D.glasses.that.can.utilise.the.DLP.Link®.signal.embedded.in.the.image.
If.the.3D.images.are.displayed.in.the.wrong.order,.set.L-R Swap.to.Swap.
•
•
•
•
•
•
•
•
•
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
 Overscan is used to compensate 
for noisy or badly defined image 
edges, by either:
  - cropping the edges from the image 
 or
 - increasing the size of the image, to 
force the edges off-screen.
Main Menu3D Settings
  D video is not possible with all 
inputs. See the Connection Guide 
for more information.
 3D Type can be set only when 
3D Enable is Off.
 DLP Link and L-R Swap can be set 
only when 3D Enable is On.