Home
>
Digital Projection
>
Projector
>
Digital Projection Projector HIGHlite Laser 3D Series User Manual
Digital Projection Projector HIGHlite Laser 3D Series User Manual
Here you can view all the pages of manual Digital Projection Projector HIGHlite Laser 3D Series User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
page 113 Reference Guide APPENDIX E: WIRING DETAILS Appendix E: Wiring Details Signal inputs and outputs VGA 15 way D-type connector 1 R 2 G 3 B 4 unused 5 Digital Ground (H Sync) 6 R Ground 7 B Ground 8 G Ground 9 +5V 10 Digital Ground (V Sync/DDC) 1 unused 12 SDA 13 H Sync 14 V Sync 15 SCL Notes VGA: pin view of female connector Digital Projection HIGHlite Laser 3D Series Rev C Februar y 2015
Page 122
page 114 Reference Guide APPENDIX E: WIRING DETAILS HDMI 1 and 2 19 way type A connector 1 TMDS Data 2+ 2 TMDS Data 2 Shield 3 TMDS Data 2- 4 TMDS Data 1+ 5 TMDS Data 1 Shield 6 TMDS Data 1- 7 TMDS Data 0+ 8 TMDS Data 0 Shield 9 TMDS Data 0- 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock- 13 CEC 14 not connected 15 SCL (DDC Clock) 16 SCA (DDC Data) 17 DDC/CEC Ground 18 +5 V Power 19 Hot Plug Detect HDMI: pin view of panel connector Notes Digital Projection HIGHlite Laser 3D Series Rev C Februar y...
Page 123
page 115 Reference Guide APPENDIX E: WIRING DETAILS DVI 24 way D-type connector Pin 1 TMDS data 2− Digital red− (link 1) Pin 2 TMDS data 2+ Digital red+ (link 1) Pin 3 TMDS data 2/4 shield Pin 4 TMDS data 4− Digital green− (link 2) Pin 5 TMDS data 4+ Digital green+ (link 2) Pin 6 DDC clock Pin 7 DDC data Pin 8 Analog vertical sync Pin 9 TMDS data 1− Digital green− (link 1) Pin 10 TMDS data 1+ Digital green+ (link 1) Pin 11 TMDS data 1/3...
Page 124
page 116 Reference Guide APPENDIX E: WIRING DETAILS 3G-SDI In, 3G-SDI Out 75 ohm BNC Component 1 3 x RCA Phono connector Component 2 3 x 75 ohm BNC connector RGsBYCbCrYPbPr RCrPr G + SyncGY BCbPb HDBaseT input RJ45 socket. 3G-SDI connector Notes 3G-SDI signals are very high speed digital signals which require better quality coaxial cable than conventional analogue video. The data rate is 3 Gigabits per second. In choosing cable length and connectors for any installation the frequency response...
Page 125
page 117 Reference Guide APPENDIX E: WIRING DETAILS Control connections LAN RJ45 socket RS232 9 way D-type connector 1 unused 2 Received Data (RX) 3 Transmitted Data (TX) 4 unused 5 Signal Ground 6 unused 7 unused 8 unused 9 unused Notes Only one remote connection (RS232 or LAN) should be used at any one time. Update port RS232: pin view of female connector Digital Projection HIGHlite Laser 3D Series Rev C Februar y 2015
Page 126
page 118 Reference Guide APPENDIX E: WIRING DETAILS Trigger 1 & Trigger 2 3.5 mm mini jack Tip Signal Sleeve Ground IR input 3.5 mm mini jack Tip Signal Ring Not connected Sleeve Ground USB USB type A socket Pin 1 VCC (+5 V) Pin 2 Data− Pin 3 Data+ Pin 4 Ground 3D Sync IN and 3D Sync OUT 75 ohm BNC TipSleeveNotes Sleeve Ring Tip USB port: pin view of female connector pin view of female connector Digital Projection HIGHlite Laser 3D Series Rev C Februar y 2015
Page 127
![Page 127
page 119
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Appendix F: Glossar y Of Terms
1080p
An HDTV resolution which corresponds to 1920 x 1080 pixels (a widescreen aspect ratio of 16:9).
3D active glasses
Wireless battery-powered glasses with LCD shutters. Synchronization info\
rmation is communicated to the glasses by means of an infrared
(IR) or radio frequency (RF) emitter which is connected to the Sync Out terminal on the projector. IR or RF pulses are transmitted by the
emitter to signal when...](http://img.usermanuals.tech/thumb/5761/99755/w300_projector_manual_8678_d-126.png "Page 127
page 119
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Appendix F: Glossar y Of Terms
1080p
An HDTV resolution which corresponds to 1920 x 1080 pixels (a widescreen aspect ratio of 16:9).
3D active glasses
Wireless battery-powered glasses with LCD shutters. Synchronization info\
rmation is communicated to the glasses by means of an infrared
(IR) or radio frequency (RF) emitter which is connected to the Sync Out terminal on the projector. IR or RF pulses are transmitted by the
emitter to signal when...")
page 119 Reference Guide APPENDIX F: GLOSSARY OF TERMS Appendix F: Glossar y Of Terms 1080p An HDTV resolution which corresponds to 1920 x 1080 pixels (a widescreen aspect ratio of 16:9). 3D active glasses Wireless battery-powered glasses with LCD shutters. Synchronization info\ rmation is communicated to the glasses by means of an infrared (IR) or radio frequency (RF) emitter which is connected to the Sync Out terminal on the projector. IR or RF pulses are transmitted by the emitter to signal when...
Page 128
![Page 128
page 120
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Aspect ratio
The proportional relationship between the width and the height of the projected image. It is represented by two numbers separated by a colon,
indicating the ratio of image width and height respectively: for example\
, 16:9 or 2.35:1.
Not to be confused with resolution.
Blanking (projection)
The ability to intentionally turn off, that is, set to black, areas around the edges of the projected image.\
It is sometimes referred to as...](http://img.usermanuals.tech/thumb/5761/99755/w300_projector_manual_8678_d-127.png "Page 128
page 120
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Aspect ratio
The proportional relationship between the width and the height of the projected image. It is represented by two numbers separated by a colon,
indicating the ratio of image width and height respectively: for example\
, 16:9 or 2.35:1.
Not to be confused with resolution.
Blanking (projection)
The ability to intentionally turn off, that is, set to black, areas around the edges of the projected image.\
It is sometimes referred to as...")
page 120 Reference Guide APPENDIX F: GLOSSARY OF TERMS Aspect ratio The proportional relationship between the width and the height of the projected image. It is represented by two numbers separated by a colon, indicating the ratio of image width and height respectively: for example\ , 16:9 or 2.35:1. Not to be confused with resolution. Blanking (projection) The ability to intentionally turn off, that is, set to black, areas around the edges of the projected image.\ It is sometimes referred to as...
Page 129
page 121 Reference Guide APPENDIX F: GLOSSARY OF TERMS Chrominance Also known as ‘C’, this is the component, or pair of components, of a Component Video signal which describes color difference information. Color difference In Component Video signals, the difference between specified colors and the luminance component. Color difference is zero for monochrome images. Color gamut The spectrum of color available to be displayed. Color temperature The position along the black body curve on the chromaticity...
Page 130
page 122 Reference Guide APPENDIX F: GLOSSARY OF TERMS Crop Remove part of the projected image. Alternatively, fit an image into a frame with a different aspect ratio by removing part of the image. The image is resized so that either its length or its width equals the length or width of the frame, while the other dimension has moved outside the frame; the excess area is then cut out. Dark time The time inserted between frames when using 3D active glasses, to avoid ghosting caused by switching time...