Digital Projection Projector HIGHlite 660 3D Series User Manual

page 33
Connection Guide
CONTROL CONNECTIONS
RS232 connection exampleNotes
Projector
Computer
Null-modem 
cable
Back panel with control connections
1
1RS232
   
Digital Projection HIGHlite 660 3D Series 
Rev E Februar y 2015  

Connection Guide
   
Digital Projection HIGHlite 660 3D Series 
This page is intentionally left blank.  

OPERATING GUIDE4 
Rev E Februar y 2015 
HIGHlite 660 3D Series
High Brightness Digital Video Projector  

Operating Guide
IN THIS GUIDE
Blending .....................................................................................................\
.....................58
Segmentation .....................................................................................................\
.............59
Blend Width .....................................................................................................\
................61
Black Level Uplift...

page 37
Operating Guide
USING THE MENUS
Using The Menus
Use the buttons on the projector control panel or on the remote control,\
 to access the menu system.
• To open or close the on-screen display (OSD), press MENU.
Menus and sub-menus
• To open a sub-menu, select it using the UP and DOWN arrow buttons, then press OK.
• To return to the previous menu, press EXIT.
Notes
 Some menu items may not be 
available due to settings in other 
menus. These will be grayed out on 
the actual menu.
 When  a globe...

page 38
Operating Guide
USING THE MENUS
Drop-down lists
To use a drop-down list:
1. Navigate to the drop-down list in the menu and 
press OK.
2. Highlight an item from the list using 
the UP and DOWN arrow buttons.
3. Press OK again to select the highlighted item, or 
press EXIT to exit without changing.
Notes
 Some menu items may not be 
available due to settings in other 
menus. These will be grayed out on 
the actual menu.
 When  a globe icon  appears next 
to a setting, the setting affects all...

page 39
Operating Guide
USING THE MENUS
Sliders
To use a slider, press the LEFT and RIGHT arrow buttons to adjust it.
Commands
To use a command, press OK. In the example below, press OK to confirm, or press EXIT to cancel.
Notes
 Some menu items may not be 
available due to settings in other 
menus. These will be grayed out on 
the actual menu.
 When  a globe icon  appears next 
to a setting, the setting affects all 
sources and all inputs; otherwise, 
only the current input source will be 
affected if...

page 40
Operating Guide
USING THE MENUS
Editing fields
Some features require a text or numeric field to be edited.
1. To edit a field, first select it using the LEFT and RIGHT arrow buttons, then press OK.
2. Use the LEFT and RIGHT arrow buttons to move the green highlight to the digit or character whi\
ch is to be changed, then use 
UP and DOWN to adjust it.
3. Use the LEFT and RIGHT arrow buttons to select the next digit or character.
4. Press OK to accept the new value, or press EXIT to exit without...

page 41
Operating Guide
USING THE PROJECTOR
Using The Projector
Main menu
• Input Selection 
Select an input source from the drop-down list.
• Test Pattern 
Set Input Selection to Test Pattern and then select a test pattern from the drop-down list.
• Lens, Image, Color and Geometry 
Open these sub-menus to access various picture and screen settings.
• Edge Blend / PIP 
PIP and Edge Blend are mutually exclusive modes of operation. When the projector is in Edg\
e 
Blend mode (as shown in the picture), PIP...

page 42
Operating Guide
USING THE PROJECTOR
Lens menu
Zoom
To move the lens in or out:
1. Select Zoom In or Zoom Out, then press OK.
2. When the image is the desired size, select Zoom Stop and then press OK.
Focus
To adjust the focus:
1. Select Focus Near or Focus Far, then press OK.
2. When the image is correctly focused, select Focus Stop and then press OK.
Center Lens
To center the lens, select Center Lens and press OK.
Notes
Main MenuLens
 You can also move the lens, focus 
and zoom using the keypad...