Digital Projection Projector E-Vision 6500 Series User Manual

E-Vision 6500 Series
High Brightness Digital Video Projector
OPERATING GUIDE
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AU
TO
Rev D July 2014  

Digital Projection E-Vision 6500 Series  IN THIS GUIDE Operating Guide
IN THIS GUIDE
Using The Remote Control ........................................................................\
.....27
Using The Menus ........................................................................\
.......................28
Navigating the menus ...............................................................................................28
Submenus...

Digital Projection E-Vision 6500 Series  Using The Remote Control Operating Guide
Page 27
Using The Remote ControlNotes
 Some options and controls may not 
be available due to settings in the 
menus.
 For full details of how to use the 
menu system, see later in this guide.
MENU controls
LENS controls
POWER controls
INPUT: select from the available video input signals
PICTURE: opens the Picture menu
AUTO SYNC: Projector will re-synchronise with the current input signal
ASPECT: select from a list of...

Digital Projection E-Vision 6500 Series  Using The Menus Operating Guide
Page 28
Using The Menus
Use the buttons on the projector control 
panel or on the remote control, to access the 
menu system.
• To open or close the on-screen display 
(OSD), press MENU.
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
Remote controlProjector control panel
Navigating the menus
• Select a menu using
 and,
• then open the menu...

Digital Projection E-Vision 6500 Series  Using The Menus Operating Guide
Page 29
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
Submenus
• Select a submenu using
 and.
• then open the submenu by pressing 
ENTER.
The name of the submenu is shown at 
the top of the menu.
• To close the submenu, press CANCEL/
RETURN.
Sliders
• Use  or to adjust the value. 
Rev D July 2014  

Digital Projection E-Vision 6500 Series  Using The Menus Operating Guide
Page 30
Selecting parameters
Most parameters are changed by selecting 
from a list:
• Select from the list using
 and .
• The change will be made immediately.
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
Some parameters are changed by selecting 
from a pop-up menu.
• Press ENTER to open the pop-up menu.
• The item that is currently...

Digital Projection E-Vision 6500 Series  Using The Menus Operating Guide
Page 31
Commands
• To use a command, press ENTER.
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
In this example,
• use  or to move the green 
highlight to No or Ye s,
• then press ENTER to confirm your 
selection.
Editing fields
Some features require a text or numeric field 
to be edited.
• To edit a field, first use  or to 
select the...

Digital Projection E-Vision 6500 Series  A Tour Of The Menus Operating Guide
Page 32
A Tour Of  The Menus
Picture menu
Picture Mode
• Select a picture mode as required.
Brilliant Color
• Select 0, 1 or 2, as required.
Brightness, Contrast, Color, Tint, Sharpness
• Adjust the sliders for these settings, as required.
Reset
• Press ENTER to restore all settings in the Picture Menu (except Picture Mode and Signal 
Type) to their factory defaults.
• When the warning message appears, use  or to move the green...

Digital Projection E-Vision 6500 Series  A Tour Of The Menus Operating Guide
Page 33
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
Picture MenuAdvance Setting Submenu
 Increasing the Red content will 
make the image feel ‘warmer’, Blue 
will make it feel ‘colder’.
Advance Setting submenu
Signal Type
• Set this to Auto, except when the projector has problems selecting between RGB, 
YCrCb and YPrPb.
Color Temperature
• Set this to suit the specification of the...

Digital Projection E-Vision 6500 Series  A Tour Of The Menus Operating Guide
Page 34
Film Mode
• Set this to Auto, and the projector will automatically detect:
3:2 pulldown for 60Hz signals 
2:2 pulldown for 50Hz signals
• Set this to Off, to disable automatic pulldown detection.
Noise Reduction
• Select a Noise Reduction level as required.
Dynamic Black
• Set this to On or Off as required.
Notes
 The Film Mode setting is available 
only for interlaced signals on the 
Video or S-Video inputs.
 Dynamic...