Home
>
Digital Projection
>
Projector
>
Digital Projection Projector E-Vision 6500 Series User Manual
Digital Projection Projector E-Vision 6500 Series User Manual
Here you can view all the pages of manual Digital Projection Projector E-Vision 6500 Series User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
Digital Projection E-Vision 6500 Series Signal Inputs And Outputs Connection Guide 15 Signal Inputs And Outputs Computer 1 • Connect an analog computer (VGA) cable to the 15-pin D-type. Computer 2 • Connect a set of RGsB, RGBHV or YCbCr cables to the BNC connectors. Computer 3 • Connect a DVI-I cable to the DVI connector. Component • Connect a set of YPbPr or YCbCr cables to the RCA phono connectors. Video or S-Video • Connect a composite video cable to the single RCA phono connector, or an S-Video...
Page 22
Digital Projection E-Vision 6500 Series Supported Signal Input Modes Connection Guide 16 Supported Signal Input Modes SignalResolutionRefresh Rate ( Hz ) Total number of lines Horizontal Frequency (kHz) 3D VIDEO /S-VIDEOCOMPONENTCOMPUTER 1 (VGA) COMPUTER 2(RGB/YCbCr)COMPUTER 3 (DVI-I) SDTV480i720 x 48059.9452515.73üüü 576i720 x 5765062515.63üüü HDTV 480p720 x 48059.9452531.47üüü 576p720 x 5765062531.25üüü 720p501280 x 7205075037.50üüü 720p601280 x 7206075045.00üüü 1080i501920 x 108050112528.13üüü...
Page 23
Digital Projection E-Vision 6500 Series Supported Signal Input Modes Connection Guide 17 ...continued from previous page SignalResolutionRefresh Rate ( Hz ) Total number of lines Horizontal Frequency (kHz) 3D VIDEO /S-VIDEOCOMPONENTCOMPUTER 1 (VGA) COMPUTER 2(RGB/YCbCr)COMPUTER 3 (DVI-I) COMPUTERWXGA601280 x 72059.9 74644.7 üüüü continuedWXGA601280 x 7206075045üüü WXGA1201280 x 72012075090ü WXGA1201280 x 720120.177292.7üü WXGA601280 x 76859.979847.8üüü WXGA601280 x 80059.883149.7üüüü WXGA751280 x...
Page 24
Digital Projection E-Vision 6500 Series Control Connections Connection Guide 18 Control Connections Screen Trigger The Trigger output can be connected to an electrically operated screen, autom\ atically deploying the screen when the projector is switched on, and retracting t\ he screen when the projector is switched to standby. USB Ser vice Port The USB Service Port is used to download firmware updates, issued from time to time by Digital Projection. Wired Remote Control If infrared signals from the...
Page 25
Digital Projection E-Vision 6500 Series Wiring Details Connection Guide 19 Wiring Details Signal inputs and outputs Monitor video output (VGA) Computer 1 video input: analog computer (VGA) 15 way D-type connector 1 R 2 G 3 B 4 unused 5 Digital Ground (H Sync) 6 R Ground 7 B Ground 8 G Ground 9 +5v 10 Digital Ground (V Sync/DDC) 11 unused 12 SDA 13 H Sync 14 V Sync 15 SCL Computer 2 video input: RGBHV, RGsB or YCbCr 5 x 75 ohm BNC RGBHV RGsB YCbCr Green Green + Sync Y Blue Blue Cb Red...
Page 26
Digital Projection E-Vision 6500 Series Wiring Details Connection Guide 20 Computer 3 video input: DVI-D 24 way D-type connector 1 TMDS Data 2- 2 TMDS Data 2+ 3 TMDS Data 2 Shield 4 unused 5 unused 6 DDC Clock 7 DDC Data 8 unused 9 TMDS Data 1- 10 TMDS Data 1+ 11 TMDS Data 1 Shield 12 unused 13 unused 14 +5 V Power 15 Ground 16 Hot Plug Detect* 17 TMDS Data 0- 18 TMDS Data 0+ 19 TMDS Data 0 Shield 20 unused 21 unused 22 TMDS Clock Shield 23 TMDS Clock+ 24 TMDS Clock- * Hot plug detect (HPD) is fully DVI...
Page 27
Digital Projection E-Vision 6500 Series Wiring Details Connection Guide 21 Component video input 3 x RCA Phono YCbCr YPbPr Cr Pr Y Y Cb Pb Notes For full details of all input settings, see the Advanced menu in the Operating Guide. Y Pb/Cb Pr/Cr Rev D July 2014
Page 28
Digital Projection E-Vision 6500 Series Wiring Details Connection Guide 22 Video input 1 x RCA Phono Composite Video S-Video input 4 pin mini-DIN 1 Y Ground 2 C Ground 3 Luminance (Y) 4 Chrominance (C) pin view of female connector Notes For full details of all input settings, see the Advanced menu in the Operating Guide. Rev D July 2014
Page 29
Digital Projection E-Vision 6500 Series Wiring Details Connection Guide 23 Control connections Screen Trigger output 3.5mm mini jack Tip 12V output Sleeve Ground RS232 Serial control input 1 unused 2 Received Data (RX) 3 Transmitted Data (TX) 4 unused 5 Signal Ground 6 unused 7 unused 8 unused 9 unused Null-modem cable (used to connect the projector to a computer) RX 2 --- 3 TX TX 3 --- 2 RX GND 5 --- 5 GND Wired remote control connection 3.5mm mini jack Tip Not connected Ring Signal Sleeve Ground...
Page 30
Digital Projection E-Vision 6500 Series Wiring Details Connection Guide 24 LAN connection 10BaseT Unshielded Twisted Pair cable The standard wire colors are as follows: 1 White / Orange stripe 2 Orange 3 White / Green stripe 4 Blue 5 White / Blue stripe 6 Green 7 White / Brown stripe 8 Brown Crossed cable (used to connect directly to a computer with no hub or network.) (Note that only the green and orange pairs are crossed) 1 White / Orange stripe White / Green stripe 1 2 Orange Green 2 3...