Digital Projection Projector E-Vision 6500 Series User Manual

Digital Projection E-Vision 6500 Series  Getting To Know The Projector Installation and Quick-Start Guide
5
Control panel and indicators
Some of the controls from the remote control are duplicated on the proje\
ctor control panel, as 
shown on the right.
The CANCEL button has the same function as the RETURN button on the remote control.
The SOURCE and AUTO buttons have the same function as the INPUT and AUTO SYNC 
buttons on the remote control.
The Power indicator will show amber when in standby and...

Digital Projection E-Vision 6500 Series  Changing The Lens, Lamps And Color Wheel Installation and Quick-Start Guide
6
Changing The Lens, Lamps And Color Wheel
Removing the lens
1. Remove the lens cap.
2. Push in the lens release lever, and turn the lens anti-clockwise.
3. Remove the lens.
Fitting the lens
1. Position the lens so that the label marked ‘O’ is at the top, push in the lens release lever and and gently insert the\
 lens all the way into the 
lens mount.
2. Turn the lens clockwise until it...

Digital Projection E-Vision 6500 Series  Changing The Lens, Lamps And Color Wheel Installation and Quick-Start Guide
7
Changing the lamp
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the two captive screws securing the lamp module.
3. Pull firmly upwards on the handle to remove the lamp module.
4. Insert a new lamp module.
5. Fasten the screws.
6. Replace the lamp compartment cover.
123
Notes
 Always allow the lamp to cool for 
5 minutes before:
  - disconnecting the power...

Digital Projection E-Vision 6500 Series  Changing The Lens, Lamps And Color Wheel Installation and Quick-Start Guide
8
Changing the color wheel
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the four captive screws securing the color wheel.
3. Remove the color wheel.
4. Insert a new color wheel.
5. Fasten the screws.
6. Replace the lamp compartment cover.
456
321
Notes
 Always allow the lamp to cool for 
5 minutes before:
  - disconnecting the power 
- moving the projector...

Digital Projection E-Vision 6500 Series  Positioning The Screen And Projector Installation and Quick-Start Guide
9
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing\
 by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that 
the projector is level, and perpendicular to the screen.  
Alternatively, five M4 bolts (max length 12 mm [0.5...

Digital Projection E-Vision 6500 Series  Operating The Projector Installation and Quick-Start Guide
10
Operating The Projector
Switching the projector on
• Connect the power cable between the mains supply and the projector . Switch on at the switch next to the power connector.
• Wait until the self-test has completed and the Power indicator on the projector control panel shows amber. The lamp will be off and the 
projector will be in STANDBY mode.
• Press  on the control panel or POWER ON on the remote...

Digital Projection E-Vision 6500 Series  Operating The Projector Installation and Quick-Start Guide
11
Adjusting the lens
Zoom
• Use the ZOOM +/− buttons on the control panel or on the remote control to adjust the 
lens so that the image fills the screen.
Focus
• Use the FOCUS +/− buttons on the control panel or on the remote control to adjust the 
lens until the image is sharp.
Shift
• Use the LENS SHIFT buttons , ,  and on the control panel to adjust the 
position of the image,
or press the LENS SHIFT...

Digital Projection E-Vision 6500 Series  Operating The Projector Installation and Quick-Start Guide
12
Switching the projector off
• Press  on the control panel or STANDBY on the remote control, then press the button a second time within 5 seconds to confirm your 
intention to switch off.
The lamp will go off, and the Power indicator on the control panel will flash amber for a few seconds whilst the lamp cools.  The Power 
indicator on the control panel will then show amber and the projector wi\
ll be in...

E-Vision 6500 Series
High Brightness Digital Video Projector
CONNECTION GUIDE
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AU
TO
Rev D July 2014  

Digital Projection E-Vision 6500 Series  IN THIS GUIDE Connection Guide
IN THIS GUIDE
Signal Inputs And Outputs ........................................................................\
.....15
Computer 1 ................................................................................................................15
Computer 2 ................................................................................................................15
Computer 3...