Digital Projection M-vision Cine Led User Manual

Rev B December 2010 Page 4.23
Digital Projection M-Vision Cine LED User Manual 4. Controlling the projector

Rear Projection
Use the  and  keys to select from:
On   Projected image is reversed, left to right
Off
Ceiling Mode
Use the  and  keys to select from:
On   Projected image is reversed, top to bottom
Off
Logo Display
Use the  and  keys to select from:
On   The Digital Projection logo is displayed during power up
Off
•
•
•
Notes
 To exit from the menus 
completely, you may need to 
press  up to...

Page 4.24 Rev B December 2010
4. Controlling the projector Digital Projection M-Vision Cine LED User Manual

Notes
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use the the 
 and  keys to select a 
different page.
 To exit from the menus 
completely, you may need to 
press  up to three times.
 For more information about 
the trigger output, see Control 
connections in section 
6.  Appendix. 
 For more information about 
RS232 commands, see Remote...

Rev B December 2010 Page 4.25
Digital Projection M-Vision Cine LED User Manual 4. Controlling the projector

Notes
 To set what a ‘blank’ screen 
looks like, use the Blank 
Screen setting in the System 
menu.
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use the the 
 and  keys to select a 
different page.
 To exit from the menus 
completely, you may need to 
press  up to three times.
 If a source has been disabled in 
the System menu, then a key...

Page 4.26 Rev B December 2010
4. Controlling the projector Digital Projection M-Vision Cine LED User Manual

Notes
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use the the 
 and  keys to select a 
different page.
 To exit from the menus 
completely, you may need to 
press  up to three times.
 Restore Defaults will restore 
all settings to factory 
defaults.
  If you are not sure this is 
what you want to do, then 
either:
 make a record of all...

Rev B December 2010 Page 4.27
Digital Projection M-Vision Cine LED User Manual 4. Controlling the projector

Blue Only
This is useful for color-calibrating the projector or other video compon\
ents.
Use the  and  keys to select from:
On only the blue signal is displayed - green and red are turned off
Off    all three signals - red, green and blue - are displayed
Test Patterns
Use the  and  keys to select from:
Test Pattern Off
White
Black
Red
Green
Blue
Cyan
Magenta
Yellow
Chequerboard
Greyscale...

Page 4.28 Rev B December 2010
4. Controlling the projector Digital Projection M-Vision Cine LED User Manual 

Rev B December 2010 Page 5.1
5. Maintenance
Contents
Changing the LED module ........................................................................\
.......................................5.2
Cleaning the fans ........................................................................\
........................................................5.2 

Page 5.2 Rev B December 2010
5. Maintenance Digital Projection M-Vision Cine LED User Manual
Changing the LED module
The LED module should be changed only by qualified and authorised servic\
e 
personnel.
Contact your Digital Projection Dealer.
•
•
Notes
 The LED module in this 
projector should be changed 
ONLY by authorised and 
qualified service personnel.
 Always switch the projector 
OFF before cleaning the fans.
  The fans should be cleaned 
regularly:
In a clean environment such as 
an office,...

Rev B December 2010 Page 6.1
6. Appendix
Contents
Troubleshooting ........................................................................\
..........................................................6.2
Error codes ........................................................................\
..............................................................6.4
Specifications ........................................................................\...

Page 6.2 Rev B December 2010
6. Appendix Digital Projection M-Vision Cine LED User Manual

Troubleshooting
problempossible solutions
The red ISSUE indicator is illuminated 
continuously or flashing.
Check the Error codes detailed on the next page.
The projector will not power up.Note that the blue POWER indicator light will be OFF when the projector \
is in 
normal RUNNING MODE.
Check that the mains plug is plugged in and that the mains supply is swi\
tched on.
Check any external fuses or breakers.
The...