Digital Projection M-vision Cine Led User Manual
Here you can view all the pages of manual Digital Projection M-vision Cine Led User Manual . The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Rev B December 2010 Page 2.13 Digital Projection M-Vision Cine LED User Manual 2. Installation Notes For more information on selecting an input source, see section 4. Overview, Using the control keys, and Using the menus. For more information about pin connections and control codes see section 6. Appendix. Connecting the projector Signal Inputs The following inputs are available: HDMI 1 & 2 HDCP-compliant digital video inputs from HDMI or DVI sources. RGB 15 pin D-type VGA style input from...
Page 32
Page 2.14 Rev B December 2010 2. Installation Digital Projection M-Vision Cine LED User Manual Input connection examples, continued
Page 33
![Page 33
Rev B December 2010 Page 2.15
Digital Projection M-Vision Cine LED User Manual 2. Installation
Notes
For more information about pin
connections and control codes
see section 6. Appendix.
For more information about the
Trigger outputs see Control
Menu in section 4. Controlling
the projector.
Control connections
The following connections are available:
remote control
If infrared signals from the remote control cannot reach the projector d\
ue to
excessive distance or obstructions such as walls...](http://img.usermanuals.tech/thumb/5761/87531/w300_digital-projection-m-vision-wuxga-led-w-156-186-lens-manual_d-32.png "Page 33
Rev B December 2010 Page 2.15
Digital Projection M-Vision Cine LED User Manual 2. Installation
Notes
For more information about pin
connections and control codes
see section 6. Appendix.
For more information about the
Trigger outputs see Control
Menu in section 4. Controlling
the projector.
Control connections
The following connections are available:
remote control
If infrared signals from the remote control cannot reach the projector d\
ue to
excessive distance or obstructions such as walls...")
Rev B December 2010 Page 2.15 Digital Projection M-Vision Cine LED User Manual 2. Installation Notes For more information about pin connections and control codes see section 6. Appendix. For more information about the Trigger outputs see Control Menu in section 4. Controlling the projector. Control connections The following connections are available: remote control If infrared signals from the remote control cannot reach the projector d\ ue to excessive distance or obstructions such as walls...
Page 34
Page 2.16 Rev B December 2010 2. Installation Digital Projection M-Vision Cine LED User Manual Power connectionNotes Use only the power cable provided. Ensure that the power outlet includes a Ground connection, as this equipment MUST be earthed. Handle the power cable carefully and avoid sharp bends. Do not use a damaged power cable. Power connection
Page 35
![Page 35
Rev B December 2010 Page 3.1
3. Getting Started
Contents
Positioning the screen and projector ........................................................................\
....................3.2
Switching the projector on ........................................................................\
.......................................3.2
Inserting batteries into the remote control ........................................................................\
...........3.2
Selecting an input signal or test...](http://img.usermanuals.tech/thumb/5761/87531/w300_digital-projection-m-vision-wuxga-led-w-156-186-lens-manual_d-34.png "Page 35
Rev B December 2010 Page 3.1
3. Getting Started
Contents
Positioning the screen and projector ........................................................................\
....................3.2
Switching the projector on ........................................................................\
.......................................3.2
Inserting batteries into the remote control ........................................................................\
...........3.2
Selecting an input signal or test...")
Rev B December 2010 Page 3.1 3. Getting Started Contents Positioning the screen and projector ........................................................................\ ....................3.2 Switching the projector on ........................................................................\ .......................................3.2 Inserting batteries into the remote control ........................................................................\ ...........3.2 Selecting an input signal or test...
Page 36
![Page 36
Page 3.2 Rev B December 2010
3. Getting Started Digital Projection M-Vision Cine LED User Manual
Switching the projector on
Connect the power cable between the mains supply and the projector.
Wait until the self-test has completed and the power indicator on the pro\
jector
control panel shows steady blue. The LED module will be off and the projector
will be in STANDBY mode.
Press POWER ON on the remote control or POWER on the projector
control panel to switch the projector ON. The power indicator...](http://img.usermanuals.tech/thumb/5761/87531/w300_digital-projection-m-vision-wuxga-led-w-156-186-lens-manual_d-35.png "Page 36
Page 3.2 Rev B December 2010
3. Getting Started Digital Projection M-Vision Cine LED User Manual
Switching the projector on
Connect the power cable between the mains supply and the projector.
Wait until the self-test has completed and the power indicator on the pro\
jector
control panel shows steady blue. The LED module will be off and the projector
will be in STANDBY mode.
Press POWER ON on the remote control or POWER on the projector
control panel to switch the projector ON. The power indicator...")
Page 3.2 Rev B December 2010 3. Getting Started Digital Projection M-Vision Cine LED User Manual Switching the projector on Connect the power cable between the mains supply and the projector. Wait until the self-test has completed and the power indicator on the pro\ jector control panel shows steady blue. The LED module will be off and the projector will be in STANDBY mode. Press POWER ON on the remote control or POWER on the projector control panel to switch the projector ON. The power indicator...
Page 37
Rev B December 2010 Page 3.3 Digital Projection M-Vision Cine LED User Manual 3. Getting Started Selecting an input signal or test pattern Input Connect an video source to the projector. The signal should be automatically detected by the projector, and should be displayed within a two or three seconds. If more than one signal is connected to the projector, then select which signal is to be displayed, using the to buttons on the remote control, or by pressing the SOURCE button on the projector...
Page 38
![Page 38
Page 3.4 Rev B December 2010
3. Getting Started Digital Projection M-Vision Cine LED User Manual
Adjusting the projected image
Aspect ratio
Press on the remote control until the image is displayed in the corect aspect\
ratio.
Image quality settings
Press any of the following keys on the remote control, followed by and , to
adjust these image quality settings:
Brightness
Contrast
Sharpness
•
•
Notes
For more detailed information
about:
- using all the control keys
on the remote...](http://img.usermanuals.tech/thumb/5761/87531/w300_digital-projection-m-vision-wuxga-led-w-156-186-lens-manual_d-37.png "Page 38
Page 3.4 Rev B December 2010
3. Getting Started Digital Projection M-Vision Cine LED User Manual
Adjusting the projected image
Aspect ratio
Press on the remote control until the image is displayed in the corect aspect\
ratio.
Image quality settings
Press any of the following keys on the remote control, followed by and , to
adjust these image quality settings:
Brightness
Contrast
Sharpness
•
•
Notes
For more detailed information
about:
- using all the control keys
on the remote...")
Page 3.4 Rev B December 2010 3. Getting Started Digital Projection M-Vision Cine LED User Manual Adjusting the projected image Aspect ratio Press on the remote control until the image is displayed in the corect aspect\ ratio. Image quality settings Press any of the following keys on the remote control, followed by and , to adjust these image quality settings: Brightness Contrast Sharpness • • Notes For more detailed information about: - using all the control keys on the remote...
Page 39
![Page 39
Rev B December 2010 Page 4.1
4. Controlling the projector
Contents
Overview ........................................................................\
.......................................................................4.3
Controlling the projector........................................................................\
.............................................4.3
The control panel ........................................................................\...](http://img.usermanuals.tech/thumb/5761/87531/w300_digital-projection-m-vision-wuxga-led-w-156-186-lens-manual_d-38.png "Page 39
Rev B December 2010 Page 4.1
4. Controlling the projector
Contents
Overview ........................................................................\
.......................................................................4.3
Controlling the projector........................................................................\
.............................................4.3
The control panel ........................................................................\...")
Rev B December 2010 Page 4.1 4. Controlling the projector Contents Overview ........................................................................\ .......................................................................4.3 Controlling the projector........................................................................\ .............................................4.3 The control panel ........................................................................\...
Page 40
![Page 40
Page 4.2 Rev B December 2010
4. Controlling the projector Digital Projection M-Vision Cine LED User Manual
Dynamic Black ........................................................................\
........................................................4.16
Adaptive Contrast ........................................................................\
...................................................4.16
RGB Adjust ........................................................................\...](http://img.usermanuals.tech/thumb/5761/87531/w300_digital-projection-m-vision-wuxga-led-w-156-186-lens-manual_d-39.png "Page 40
Page 4.2 Rev B December 2010
4. Controlling the projector Digital Projection M-Vision Cine LED User Manual
Dynamic Black ........................................................................\
........................................................4.16
Adaptive Contrast ........................................................................\
...................................................4.16
RGB Adjust ........................................................................\...")
Page 4.2 Rev B December 2010 4. Controlling the projector Digital Projection M-Vision Cine LED User Manual Dynamic Black ........................................................................\ ........................................................4.16 Adaptive Contrast ........................................................................\ ...................................................4.16 RGB Adjust ........................................................................\...