Digital Projection M-vision 1080p-260 User Manual

Rev A May 2010 Page 4.13
Digital Projection M-Vision 1080p-260 User Manual  4. Controlling the projector

Input Select
Press ENTER or SELECT.
The Input select submenu will appear:
Use the  and  keys to select from:
HDMI 1
HDMI 2
RGB
Component 1
Component 2
Video
S-Video
Press ENTER or SELECT, to select a different input source.
To return to the Main menu, press  once.
Resync
If the image has become unstable or degraded, it may be possible to improve the 
display:
Press ENTER or SELECT.
The projector...

Page 4.14  Rev A May 2010
4. Controlling the projector  Digital Projection M-Vision 1080p-260 User Manual

Notes
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use the the 
 and  keys to select a 
different page.
 To exit from the menus 
completely, you may need to 
press  up to three times.
 Image changes made using 
the menus will take effect 
immediately.
 Some menu items may be 
greyed out - unavailable due to 
the effect of settings made in 
other...

Rev A May 2010 Page 4.15
Digital Projection M-Vision 1080p-260 User Manual  4. Controlling the projector

Video Standard
In most cases, the Auto setting will determine the correct video standard to use. If it 
does not, you can select the appropriate setting manually.
Use the  and  keys to select from:
Auto 
NTSC   used mainly in the United States and Japan
PAL  used in Europe, Australia and many other parts of the world, 
typically with a 50Hz frame rate
SECAM used mainly in France and Russia
Gamma...

Page 4.16  Rev A May 2010
4. Controlling the projector  Digital Projection M-Vision 1080p-260 User Manual

Colour Gamut
In most cases, the Auto setting will determine the correct colour gamut to use. If it 
does not, you can select the appropriate setting manually. 
Each setting defines the precise hue of each primary (red, green and blue) and 
secondary (yellow, cyan and magenta) color component used to generate the 
image.
Use the  and  keys to select from:
Auto
SMPTE-C for NTSC, 480i and 480p...

Rev A May 2010 Page 4.17
Digital Projection M-Vision 1080p-260 User Manual  4. Controlling the projector

RGB Adjust
Press ENTER or SELECT.
The RGB Adjust submenu will appear:
Use the Gain controls to correct color imbalances in the bright areas of the image. 
Use the Offset controls in the RGB Adjust sub-menu to correct color imbalances in 
the dark areas of the image.
Use the  and  keys to select from:
Red Offset
Blue Offset
Green Offset
Red Gain
Blue Gain
Green Gain
Offsets
Use the  and  keys to...

Page 4.18  Rev A May 2010
4. Controlling the projector  Digital Projection M-Vision 1080p-260 User Manual

Fine Sync
Press ENTER or SELECT.
The Fine Sync submenu will appear:
Use the  and  keys to select from:
V Position fine tunes the vertical position of the image
H Position  fine tunes the horizontal position of the image
Tracking  adjusts the frequency of the pixel sampling clock, so that all pixels 
generated by the video source are sampled. Steady flickering 
or several soft vertical stripes or...

Rev A May 2010 Page 4.19
Digital Projection M-Vision 1080p-260 User Manual  4. Controlling the projector

System menu
To display the menus, press MENU  on the remote control or the projector 
control panel.
Use the  and  keys to select the System menu page,
To select a menu item, use the  and  keys until the item is highlighted.
Language
This product is available only in English at present.
•
•
•
Notes
 To select a different menu, 
press MENU  once or 
twice, so that no items are 
highlighted, then use...

Page 4.20  Rev A May 2010
4. Controlling the projector  Digital Projection M-Vision 1080p-260 User Manual

Source Enable
Press ENTER or SELECT.
The Source Enable submenu will appear:
Use the  and  keys to select from:
HDMI 1
HDMI 2
RGB
Component 1
Component 2
Video
S-Video
For each source, use the  and  keys to select from:
On  the selected source will be included in an automatic input source 
search
Off  the selected source will not be included in an automatic input 
source search
To return to the...

Rev A May 2010 Page 4.21
Digital Projection M-Vision 1080p-260 User Manual  4. Controlling the projector

Menu Position
Use the  and  keys to select from:
Top left
Top right
Bottom left
Bottom right
Centre
Blank Screen
This option determines what appears on screen when the projector is searching for 
a valid input source.
Use the  and  keys to select from:
Digital Projection logo
Black screen
Blue screen
White screen
Auto Power On
Use the  and  keys to select from:
On    When power is connected, the...

Page 4.22  Rev A May 2010
4. Controlling the projector  Digital Projection M-Vision 1080p-260 User Manual

Rear Projection
Use the  and  keys to select from:
On    Projected image is reversed, left to right
Off
Ceiling Mode
Use the  and  keys to select from:
On    Projected image is reversed, top to bottom
Off
Logo Display
Use the  and  keys to select from:
On    The Digital Projection logo is displayed during power up
Off
•
•
•
Notes
 To exit from the menus 
completely, you may need to 
press  up to...