Digital Projection Highlite 4000dsx User Manual

							When you first turn on your Highlite Displays projector you will get the startup
screen.
This screen gives you the opportunity to select one of the seven menu languages:
English, German, French, Italian, Spanish, Swedish and Japanese.
Use the cursor movement button to highlight the desired language and press
ENTER to select.
B—13
System Installation
Startup Screen (Language Select)
INSTALLATION
LBV00072; Revision A - 25/09/2001
+-
MENU
ENTER
+-
MENU
ENTER 
						

							To close the menu without making a selection or to save your language selection,
press the CANCEL button.
To select or change the language later press MENU and navigate to ‘Projector
Options’ - ‘Menu’ - ‘Page1’ - ‘Language’ and follow the above instructions.
B—14
System Installation
INSTALLATION
LBV00072; Revision A - 25/09/2001
CANCEL 
						

							CONNECTING A VIDEO RECORDER OR LASER DISC PLAYER
Video recorders and laser disc player connect to the HIGHlite DisplaysProjector
using common RCA cables (not provided). To make these connections, simply:
Connect one end of your RCA cable to the video output connector on the back 
of your video recorder or laser disc player and the other end to the Video input 
on your projector.
Refer to your VCR or laser disc player owners manual for more information
about your equipments video output requirements.
CONNECTING A COMPUTER
Connecting your PC or Macintosh computer to the HIGHlite Displays Projector will
enable you to project your computers screen image for an impressive presentation.
To connect to a computer:
Use the signal cable supplied with the PC or Macintosh computer to connect to 
the projector.
If the projector goes blank after a period of inactivity, it may be caused by a
screen saver installed on the computer.
CONNECTING A DOCUMENT CAMERA
To connect your HIGHlite Displays Projector to a document camera simply:
Using a standard video cable, connect your document camera to the Video input 
(or INPUT3, RGB) on your projector.
Refer to your document cameras owners manual for more information about
your cameras video output requirements.
B—15
System Installation
Connecting Signal Sources
INSTALLATION
LBV00072; Revision A - 25/09/2001
-
-
- 
						

							B—16
System Installation
INSTALLATION
LBV00072; Revision A - 25/09/2001 
						

							Remote Control Overview ............................................... C—1
Direct Key Combinations ........................................... C—7
Basic/Custom Menu......................................................... C—8
Menu System Overview ................................................... C—9
Navigating the Menu System ..................................C—10
Menu Structure .........................................................C—11
Menu Operation .............................................................C—13
Main Menu ...............................................................C—13
Source Select ..................................................................C—14
Entry List ...................................................................C—15
Adjust (Source)................................................................C—18
Picture .......................................................................C—18
White Balance ..........................................................C—20
Image .......................................................................C—21
Video Adj ..................................................................C—24
Option Adj ................................................................C—26
Lens Memory.............................................................C—27
Signal Type ...............................................................C—29
System Operation
Section C: System Operation
OPERATION
LBV00072; Revision A - 25/09/2001 
						

							Ref Adj.............................................................................C—30
Keystone ...................................................................C—30
Lamp ........................................................................C—31
Ref. White Bal............................................................C—31
Factory Default ..............................................................C—32
Projector Options ...........................................................C—33
Timer .........................................................................C—33
Menu ........................................................................C—35
Setup .........................................................................C—37
Link Mode .................................................................C—41
Switcher Control .......................................................C—41
PC Card Files ..................................................................C—42
Help ................................................................................C—42
Test Pattern ....................................................................C—45
System Operation
OPERATION
LBV00072; Revision A - 25/09/2001 
						

							All the functions of a HIGHLite Displaysprojector can be controlled by the remote
control unit. The remote control can be directly connected to the projector via a 
control cable or to provide more flexibility send infra red signals which are detected
by sensors located at the front and rear of the projector.
A description of all the remote control functions is provided overleaf.
C—1
System Operation
Remote Control Overview
OPERATION
LBV00072; Revision A - 25/09/2001
OFF
+-
PICTUREADJUSTABC DEFGHI
JKL MNO PQR
STU
,.
UNDO CANCEL
TEST
PICTUREKEYSTONE AMPLITUDE ENTRYLISTSOUND OSD
MUTE
MAGNIFYHELP INFO.
POSITION AUTOPIXELVWX YZ/
WHITE BAL.IMAGE
ON POWER
MENU
ENTER
123
456
7
089
ADDRESS
PROJECTOR
RGB
LENS
SHUTTER
BS
+
-
+
-
FOCUSZOOM
CTLLENS
2
5
6
7
9
10
12
13
17
20
21
22
24
2625 23 19 18 16 15 14 11 8 4 3 1 
						

							1 - POWER ON
Press to turn on the projector. The POWER indicator on the projector lights up
green.
2 - POWER OFF
Press and hold this button for a minimum of 2 seconds to turn off the projector.
3 - MENU
Press to display the main menu.
While pressing and holding CTL, press this button to display the Remote Control
ID dialog box to specify the remote control ID.
4 - ENTER
Executes the menu selection and activates items selected from the menu.
When the slidebar or dialog box is displayed:
Pressing this button confirms adjustments / settings and returns to previously dis-
played menu.
5 - CURSOR (Up / Down / Left / Right)
Moves the highlighted menu selection as indicated.
When pressed together the CTL and < buttons work as a backspace key in the entry
screen.
Pressing and holding CTL, then this button moves the menu, slidebar or dialog box
in the indicated direction on the displayed image.
6 - ADJUST WHITE BAL
Press to display the Colour adjustment screen. Sequential presses of this button
selects “Colour Temperature” - “White Balance - Brightness” - “White Balance -
Contrast” - “Signal Level”  - “Ref. White Bal” - “Switcher Gain”
7 - ADJUST PICTURE
Press to display the Picture adjustment screen. Sequential presses of this button
selects “Brightness” - “Contrast” - “Saturation” - “Colour” - “Hue” - “Sharpness” -
“V-Aperture” - “Gamma Correction”
C—2
Overview
OVERVIEW
LBV00072; Revision A - 25/09/2001 
						

							8 - IMAGE / PROJECTOR
Press to display the Image Option screen. Sequential presses of this button selects
“Pixel Adjust” - “Position” - “Aspect Ratio” - “Resolution”  - “Overscan” - “Video
Filter” - “Blanking”.
While pressing and holding CTL, sequentially pressing this button selects “On/Off
Timer” - “Sleep Timer” - “Menu” - “Setup” - “Link Mode” - “Switcher Control”.
9 - INPUT
Use to select an input, to name a signal or to enter a passcode during input registra-
tion.
1 - INPUT 1 for RGBHV / Y, Cr/Pr, Cb/Pb
2 - INPUT 2 for RGBHV / Y, Cr/Pr, Cb/Pb
3 - INPUT 3 for RGB
4 - INPUT 4 for Y, Cr/Pr, Cb/Pb
5 - INPUT 5 for VIDEO 1
6 - INPUT 6 for VIDEO 2
7 - INPUT 7 for S-VIDEO 1
8 - INPUT 8 for S-VIDEO 2
9 - INPUT 9 for RGB DIGITAL input
0 - INPUT 0 for SDI input on the optional SDI board
10 - UNDO
Press to return the adjustments and settings to the previous condition.
While pressing and holding CTL use this button to clear all menus or adjustment/
setting screen. At this time the adjustments/settings are stored in memory.
11 - CANCEL
Press this to exit to the previous menu.
While pressing and holding CTL use this button to make the previous menu active
without exiting the current menu. This feature allows you to adjust several items
concurrently.
12 - INFO
Displays the “Source Information” or “Projector Information” window.
This button toggles between these two windows.
C—3
0verview
OVERVIEW
LBV00072; Revision A - 25/09/2001 
						

							13 - TEST
Press to display internal test pattern.
Sequential presses scroll through series of five test patterns.
14 - HELP
Provides on line help.
15 - PIXEL
Displays the Pixel Adjust screen to adjust pixel clock and phase.
16 - AUTO (RGB only)
Press to automatically adjust Position-H/V and Pixel Clock for optimal picture.
The Pixel Phase is not adjusted.
17 - POSITION
Press to display the Blanking screen; press again to display the position screen.
While pressing and holding CTL, press this button to display the Lens Shift adjust-
ment screen.
18 - MUTE SOUND
(available only when using a configured switcher)
Turns off the sound for a short period of time. Press again to restore the sound.
19 - MUTE OSD
Press to turn off the on-screen menu display. Press again to restore the on-screen
display.
You can also turn off the on-screen display by pressing and holding the CTL and
then pressing MUTE OSD; doing this again restores it. It this case any adjust-
ment will still change the projector’s memory settings. This mode is available even
when an input is switched to another or if the power is turned off using the
POWER OFF button on the remote control.
C—4
Overview
OVERVIEW
LBV00072; Revision A - 25/09/2001
-
-