Digital Projection Highlite 16000Dsx+, Highlite 10000dsx+ Users Manual

E-31
ON
TESTABC1DEF2GHI3
JKL4MNO5PQR6
STU7VWX8
0YZ /9 POWER INPUT
OFF
IMAGE/PROJECTORON
OFFPICTURE
ADJUSTWHITE BAL.
ENTER
CANCEL UNDOAUTO
MAGNIFY/FOCUS  +ZOOM  +
MENU/ADDRESS
MUTE
3. Projecting an Image
2 Selecting a Source
Selecting the computer or video source
Using the Remote Control
Press the Source/Input button
(1-4) to select input.
1 ...... Slot 1
2 ...... Slot 2
3 ...... Slot 3
4 ...... Slot 4
NOTE: If no input signal is available, the Projector will display a blue background(factory preset)....

E-32
3. Projecting an Image
(2) Press and hold the CTL and press the ZOOM + or - button to adjust
the image size.  You can also adjust the image size by using the
CTR button and the ZOOM + or - button on the projector cabinet.
(3) Press and hold the CTL button and press the FOCUS + or - button
to obtain the best focus. You can also adjust the focus by using the
CTR button and the FOCUS + or - button on the projector cabinet.
Geometric Correction Tool
If you use a special shaped screen such as a...

E-33
ON
TESTABC1DEF2GHI3
JKL4MNO5PQR6
STU7VWX8
0YZ /9 POWER INPUT
OFF
IMAGE/PROJECTORON
OFFPICTURE
ADJUSTWHITE BAL.
5 Turning off the Projector
To turn off the Projector:
First press the POWER (ON/STAND BY) button on the Projector
cabinet or the POWER OFF button on the remote control for a
minimum of 1 second. The POWER indicator will glow orange.
Second, turn off the Main Power switch. The power indicator will
go out.
Last unplug the power cable.
CAUTION
• When switching off the Main Power switch, set...

E-34 

E-35
4
Convenient Features
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1 Turning Off the Image ............................................ E-36
2 Getting the On-line Help and Information .............. E-36
3 Lens Memory ......................................................... E-36 

E-36
1 Turning Off the Image
Press the MUTE PICTURE button to turn off the image for a
short period of time. Press again to restore the image.
Press the MUTE OSD button to turn off the on-screen display.
Press again to restore the on-screen display.
NOTE: You can also turn off the on-screen display forcibly by pressing and holding
CTL and then pressing MUTE OSD (Forced On-Screen Mute Mode) ; doing this
again restores it. In this case any adjustment will still change the projectors memory
settings. This...

E-37
5
Setting Up for Double Stacking
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1 Stacking and Connecting the Projectors ............... E-38
2 
Adjusting and Registering Signals to Be Projected....... E-42
3 Adjusting the Lens Shift, Zoom and Focus
to Clearly Display all projected patterns ................ E-42 

E-38
5. Setting Up for Double Stacking in Link Mode
1 Stacking and Connecting the Projectors
Master projector
Slave projector
NOTE: Up to two units can be gravity stacked without external support. In some
cases, however, two images will not align on the screen correctly. This will become
more apparent when displaying small text and detailed graphics.
NOTE: The frame is not supplied on HIGHlite 10000Dsx+.
CAUTION: To prevent the projectors from falling, install them in a place and fasten them in away with...

E-39
1-2. Frame Adjustment (HIGHlite16000Dsx+)
• Tilt Angle Adjustment
Knurled knobs (A, B on the
picture at the left) are turned
to the same direction. (note 1)
• Roll Angle Adjustment
Knurled knobs (B, C on the
picture at the left) are turned
to the same direction. (note 1)
• PAN Angle Adjustment
Knurled knob (S) (Enlarged
picture at the left) is turned.
Knurled knob(S)Knurled knob
Enlarged
Screen
Screen
Screen
note 1: when Knurled knobs at two locations are turned, the same charge shouldbe turned....

E-40
5. Setting Up for Double Stacking in Link Mode
13-1. Select “Projector Options” → “Setup” → “Page4” → “Pro-
jector ID” and assign an ID number to each projector. See also
page 8-18.
1-3-2. Select the same communication speed for both the pro-
jector.
NOTE: Do not turn on [Master] or [Slave] at this time.
 2  1
S-VIDEO
S-VIDEO
OUTPUT INPUT
AUDIO OUT VIDEO OUTLRS-VIDEOVIDEO
S-Video cable
(not supplied)
S-VIDEO
S-VIDEO
Signal Divider
Picture Device
Master projector
Slave projector
According to signal...