Digital Projection Highlite 16000Dsx+, Highlite 10000dsx+ Users Manual

E-61
[Page 3]
Selecting Menu Colour [Menu Colour]
You can choose between two colour modes for menu colour:
colour and monochrome.
Setup
[Page 1]
Selecting Projector Orientation [Orientation]
This reorients your image for your type of projection.
The options are : desktop front projection, ceiling rear projec-
tion, desktop rear projection, and ceiling front projection.
Selecting a Colour or Logo for Background [Background]
Use this feature to display a blue/ black screen or logo when
no signal is...

E-62
[Page 3]
Enabling Auto Adjust [Auto Adjust]
When Auto Adjust is set to On, the Projector automatically
determines the best resolution for the current RGB input sig-
nal to project an image.
The image can be automatically adjusted for position and sta-
bility; Horizontal Position, Ver tical Position, Clock, Phase
and Resolution.
On ............... Automatically adjusts image Horizontal Posi-
tion, Vertical Position, Clock, Phase and
Resolution.
Off ...............User can adjust the image display...

E-63
NOTE: Specifying None for Projector ID allows you to operate multiple projectors
concurrently. However, some projectors may not synchronize to the other projec-
tors.
Selecting Default Source [Default Source Select]
You can set the Projector to default to any one of its inputs
each time the Projector is turned on.
Last ............. Sets the Projector to default to the previous or
last active input each time the Projector is turned
on.
Auto ............. Searches for an active source in order of...

E-64
6. Using On-Screen Menu
Advanced
IP Address
An IP address can be automatically assigned to this Projector
by your DHCP server. If your network does not automatically
assign IP address, ask your network administrator for an ad-
dress, and then register it manually.
Automatic .... Automatically assigns an IP address to the Pro-
jector from a DHCP server.
Manual ........ Provides a space for you to register the IP ad-
dress or subnet mask number obtained from your
network administrator.
IP Address ......

E-65
6. Using On-Screen Menu
TX rate:
Select a wireless transmission speed. Normally leave it as Au-
tomatic.
Try another transmission speed when the connection fails.
WEP (required for Wireless only)
Select this option whether using the WEP (Wired Equivalent Pri-
vacy) key for encryption or not. To use encryption, specify WEP
key.
Disable ........ Will not turn on the encryption feature. Your com-
munications may be monitored by someone.
64bit ............ Uses 64-bit datalength for secure...

E-66
Type in a client identifier.
Mail
NOTE: To the Alert Mail feature on wireless LAN connection, select Infrastructurefor Mode in Network Type.
Alert Mail:
Checking this box enables Aler t Mail feature.
This option notifies your computer of an error message via e-
mail when using wireless or wired LAN.
Senders Address:
Specify the senders address. Use the Software keyboard. Up
to 60 alphanumeric and symbols characters can be used. See
Using Software Keyboard in Appendix for more details.
SMTP Server...

E-67
- Mode setting
When [Image Mode] is selected from [Projector Options], the
choices [Seamless / 2 Images / Off] are displayed.  Selecting
[2 Images] enables mode choice, and therefore select [Side-by-
side] or [Picture-in-Picture].  After selecting the desired mode,
click [OK].  Switching input video signals between left and right
slots will display two images.
If “2 Images” is selected, the lens memory feature becomes dis-
abled.
- Display modes
The following examples are display modes.  the main...

E-68
- Sub-image: The projector displayed in synchronisation
 with the actual refresh rate of the signal input.
- Main image whose aspect setting was changed
• After the test pattern is displayed, images are displayed in “1
image” maod.  For change to “2 Images” mode, select the signals
for both the main image and sub-image.
• The seamless switching function is unavailable in “2 Images”
mode.
- Off
Set when neither [Seamless] nor [2 Images] is used.
Setting a Password
A password can be set for your...

E-69
Enable/Disable ........ This turns the Security function on or off.
Keyword .................. Enter an appropriate keyword when you
use the Security function.
(Up to 10 characters can be used.)
The Security function is available only
when your keyword is entered.
Use Protect key .......Check this box to lock your projector
when using a PC card. To use a key-
word without a PC card, do not check
this box.
Drive ........................ Switches between PC Card slots.
Read ...........................

E-70
off (by setting the main power switch to O or unplugging the power
cable).
In the following cases you will be asked to check the protect key or
input the keyword:
(1) When OK is selected at an image for which security is set and
the power is turned off then back on
(2) When the main power is turned off then back on while the security
function is enabled
(3) When you attempt to display an image for which security is set
while the security function is enabled
• Blanks (spaces) cannot be used in the...