Denon Dht M330dv Operating Instructions

51
ENGLISH
DTS-ES Extended Surround TM
DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc.  While offering high compatibility
with the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround impression and space
expression thanks to further expanded surround signals.  This format has been used professionally in movie theaters since 1999.
In addition to the 5.1 surround channels (FL, FR, C, SL,...

52
ENGLISH
Dolby Virtual Speaker
Dolby Virtual Speaker technology uses proprietary technology of Dolby Laboratories to create a virtual surround sound field using only two
speakers for the front channels, allowing the user to experience sound as if surround speakers were actually being used.
2Features of Dolby Virtual Speaker soundBAccurate surround sound field positioning
The virtual surround speakers are positioned at 105° to the left and 105° to the right.
BMulti-channel programs played according to...

53
ENGLISH
•The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer)
•Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).
Example:  To set the power to the standby mode in 50 minutes according to the clock. Be sure to correct the current time setting.
(1) Setting the sleep timer (remote control unit only)
1Select and play the desired function.
2Press the SLEEP button....

54
ENGLISH
2Making system connections between the AVR-M330 and the DVD player (DVD-M330) makes operation even easier. (For instructions on
connections, refer to “Connecting the audio components” on pages 14.)
2System functions will not work properly if the input/output function settings are not right for the connected components. Be sure to set the
input/output functions for the components being used. (See page 28.) The setting contents are maintained until they are next changed even
when the power is...

55
ENGLI
16LAST FUNCTION MEMORY
•This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the
power is switched off.
This function eliminates the need to perform complicated resettings when the power is switched on.  
•The unit is also equipped with a back-up memory. This function provides memory storage when the power switch is off and with the power
cord disconnected. 
17INITIALIZATION OF THE MICROPROCESSOR
When the...

56
ENGLISH
Check again before assuming the player is malfunctioning
2Are all the connections correct ?
2Are you following the instructions in the manual ?
2Are the speakers and other components operating properly ?
If this unit does not seem to be functioning properly, check the table below. If this does not solve the problem, this unit may be damaged. Turn
off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office.
18TROUBLESHOOTING...

57
ENGLI
19SPECIFICATIONS
2Audio Section
•Power Amplifier Section 
Rated output:Front: 17 W + 17 W (6 Ω/ohm load, 1 kHz, T.H.D. 10 %) 
Center: 20 W  (6 Ω/ohm load, 1 kHz, T.H.D. 10 %) 
Surround: 17 W + 17 W (6 Ω/ohm load, 1 kHz, T.H.D. 10 %) 
Subwoofer: 20 W (6 Ω/ohm load, 1 kHz, T.H.D. 10 %) 
Output terminals:Speaker impedance: 6 to 16 Ω/ohms
•Analog Section
Input sensitivity/Input impedance:400 mV/47 kΩ/kohms
Frequency response:10 Hz to 50 kHz: +0, –3 dB (LINE, Direct mode) 
Signal-to-noise ratio:90 dB...

382
MEMO
 

Printed in China 00D 511 4267 006
TOKYO, JAPAN
www.denon.com