Denon Dht M330dv Operating Instructions

41
ENGLISH
2Table of Surround Mode Parameters (3)
Surround parameter
2ch Mode SDB/P.EQ
(Default: DEFEAT all OFF)
Analog 2-channel Surround Mode
DVS: Dolby Virtual Speaker
DH: Dolby Headphone
DOLBY DIGITAL
DTS SURROUND
DOLBY PL
IIAUTO STEREO
DTS NEO:6
DOLBY PL
IIx
DOLBY DIGITAL EX/+PLIIx
DTS SURR.+NEO:6
DTS-ES DISCRETE/MATRIXC
C
C
C
C
C
C
C
CC
C
C
C
C
C
C
C
CAUTO DECODE DVS
2SPEAKER MODE
3SPEAKER MODE
5SPEAKER MODE
DH1
DH2
DH3
BYPASS
DH
STEREO
DIRECT
5CH STEREO
M.CH STEREO
HALL
Digital...

42
ENGLISH
11LISTENING TO THE RADIO
1Select the FUNCTION “TUNER”.
2Select “FM” or “AM”.
•The selected “FM AUTO”, “FM MONO” or “AM” is
displayed. 
•When using the remote control, the mode button is used to
select FM AUTO and MONO.
3Adjust the receiving frequency. 
•When a station is received, the “TUNED” indication will
light.
NOTE:
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
Auto tuning
•When one of the...

43
ENGLISH
(2) Presetting stations (remote control unit only)
2A total of 40 stations (including both FM and AM stations) can be preset.
2Preset stations using the including remote control unit.
1Tune in the station you want to preset.
PF-- M  52 9. M0
2, 3
3
2Press the MEMO button.
Remote control unit
PF01 M  52 9. M0
3Use the“+” and “–” preset buttons to select the preset
number then press the MEMO button again to store that
station at the selected number. (The number can also be
specified directly...

44
ENGLISH
(4) Listening to preset stations (remote control unit only)
Example:  Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)
1Use the “+” and “–” preset buttons to select preset number
“3” or press the “3” button on the numeric keypad to display
preset number “P03”.
+
-
CH
Remote control unit
1
1
The preset buttons on the remote control unit (TUNER CH “+” and
“–”) can be used at any time.
Set the remote
control selector
switches 
Switch1...

45
ENGLISH
(6) RDS search
Use this function to automatically tune to FM stations that provide RDS service.
1Set the band to “FM”.
2Press the RDS button until “RDS”
appears on the display.
Remote control unit
Remote control unit
3Press the TUNING + (UP) or – (DOWN)
button to automatically begin the RDS
search operation.
Remote control unit
4When a broadcast station is found, that station’s name
appears on the display.
•If no RDS station is found when all the frequencies are searched,
“NO PROGRAMME” is...

46
ENGLISH
•If no TP station is found when all the frequencies are searched,
“NO PROGRAMME” is displayed.
(8) TP search
Use this function to find RDS stations broadcasting traffic program (TP stations).
1Set the band to “FM”.
2Press the RDS button until “TP”
appears on the display.Remote control unit
Remote control unit
3Press the TUNING + (UP) or – (DOWN)
button TP search begins.
Remote control unit
4The station name is displayed on the display after searching
stops. 
•When the RT mode is turned on...

47
ENGLISH
12EXPANDING TO A 6.1- OR 7.1-CHANNEL SYSTEM
•The DHT-M330DV is equipped with a decoder function allowing 6.1- or 7.1-channel playback (Dolby Digital EX, DTS-ES, Dolby Pro-Logic IIx, etc.),
as well as PRE OUT connectors for surround back channels (SBL and SBR).
•The DHT-M330DV is also equipped with a pre-out connector for a subwoofer channel, so the system can be improved using a commercially
available superwoofer with built-in amplifier. (Signals are constantly output from the subwoofer...

48
ENGLISH
(3) 6.1- or 7.1-channel surround playback
zChanging the Quick Setup settings
At “SPEAKER SETUP” under “Quick Setup procedure” (page 27), select the configuration to be used, “6.1CH” or “7.1CH”.
xChecking and adjusting the playback level using test tones
Before playing, use test tones to check and adjust the playback level of the different speakers. (Page 33)
•Depending on the 6.1/7.1-channel setting, the surround back channel is also displayed and can be set.
cSetting the delay time (distance...

49
ENGLISH
Surround
The AVR-M330 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same
sense of presence as in a movie theater.
Dolby Surround
(1) Dolby Digital 
Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. 
Dolby Digital consists of up to “5.1” channels - front left, front right, center, surround left, surround right, and an additional channel exclusively
reserved for additional deep...

50
ENGLISH
DTS Digital Surround
Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems.
DTS offers the same “5.1” playback channels as Dolby Digital (front left, front right and center, surround left and surround right) as well as the
stereo 2-channel mode. The signals for the different channels are fully independent, eliminating the risk of deterioration of sound quality due to
interference between signals, crosstalk, etc.
DTS...