Denon Dht M330dv Operating Instructions

21
ENGLISH
(4) TV and video deck preset memories
•Components of other brands can be operated with the included
remote control unit by storing their codes in the preset memory.
Note that depending on the model some operations may not be
possible and some buttons may not operate properly.
4 33
4
4
12
2Not set upon shipment from the factory.
1
2
34Set mode switch 1 to the “DVD” position.
Set mode switch 2 to the “TV/VCR” position.
Press the power ON button and the OFF button simultaneously.•The transmission...

22
ENGLISH
Combinations of preset codes for different brands
Fujitsu 004, 062
Funai 004, 062
Futuretech 004
GE 020, 036, 037, 040, 044, 058, 066, 088, 119, 120,
125, 147
Goldstar 015, 029, 031, 039, 048, 051, 056, 057, 067, 
068, 069, 116, 165
Grundy 062
Hitachi 029, 031, 051, 052, 070, 111, 112, 113, 124, 134
Hitachi Pay TV 151
Infinity 017, 071
Janeil 122
JBL 017, 071
JC Penny 020, 034, 039, 040, 041, 044, 048, 050,058, 066, 
069, 076, 088, 090, 095, 125, 136, 159
JCB 046
JVC 019, 051, 052, 072, 073,...

23
ENGLISH
Sharp 011, 012, 013, 026, 093, 099, 100, 104, 121
Siemens 013
Signature 045, 144
Simpson 050
Sony 043, 046, 138, 146, 150
Soundesign 030, 050, 062
Spectricon 007, 033
Squareview 004
Supre-Macy 032, 122
Supreme 046
Sylvania 005, 010, 017, 030, 078, 079, 085, 089, 101, 127, 
131, 132, 145, 155
Symphonic 004, 148
Tandy 012, 121
Tatung 036, 124
Technics 037
Teknika 001, 030, 032, 034, 052, 054, 078, 083, 095, 144, 
156, 157
Tera 035, 129
Toshiba 008, 014, 034, 063, 075, 076, 095, 097, 136, 158,...

24
ENGLISH
VCR
Admiral 081
Aiko 095
Aiwa 009
Akai 026, 027, 070, 072, 082, 083, 084
Alba 055
Amstrad 009
ASA 042
Asha 087
Audio Dynamic 005, 085
Audiovox 088
Beaumark 087
Broksonic 086, 093
Calix 088
Candle 006, 087, 088, 089, 090
Canon 049, 057
Capehart 025, 055, 056, 071
Carver 015
CCE 095
Citizen 006, 007, 087, 088, 089, 090, 095
Craig 007, 087, 088, 091, 115
Curtis Mathes 006, 049, 073, 080, 087, 090, 092
Cybernex 087
Daewoo 025, 055, 059, 074, 089, 093, 095, 096
Daytron 025, 055
DBX 005, 085
Dumont...

25
ENGLISH
VCR
Randex 088
RCA 007, 013, 019, 023, 058, 063, 064, 065, 073, 080, 
082, 087
Realistic 009, 021, 031, 033, 049, 053, 081, 087, 088, 091, 
094, 097, 098
Ricoh 055
Salora 033, 041
Samsung 007, 011, 051, 059, 070, 083, 087, 089, 113
Sanky 081
Sansui 005, 026, 029, 045, 061, 085, 114
Sanyo 032, 033, 053, 087, 091, 115, 116
SBR 042
Scott 017, 020, 086, 089, 093, 117
Sears 013, 023, 028, 031, 033, 053, 054, 088, 091, 098, 
099, 115
Sentra 055
Sharp 001, 002, 021, 097
Shogun 087
Sony 075, 076, 077,...

26
ENGLISH
(5) Operating the TV/video deck after storing its remote control signals in the preset memory
3-q3-w
12
3-w
3-q
1
2
3Set mode switch 1 to the “DVD” position.
Set mode switch 2 to the “TV/VCR” position.
Operate the video component.
•For details, refer to the component’s operating instructions.
It may not be possible to operate some models.
NOTE:
•The TV’s “TV (POWER)” and “TV IN” buttons can be operated as
long as mode switch 1 is set to the “DVD” position, regardless
of the position of mode...

 
Use as analog
input/output connector
MD function.
Use analog input/output
connectors (TAPE) and
digital input connector
(TV/AUX1) as the
TV/AUX1 function.
27
ENGLISH
(1) Quick setup procedure
•Generally used system settings have already been made on the DHT-M330DV upon shipment from the factory, so the DHT-M330DV can be
used as such if there is no need to make changes to the system.
•In the cases described below, use the Quick Setup function to make the system settings before using the DHT-M330DV....

28
ENGLISH
(2) Speaker system layout
Basic system layout
•The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor:
Subwoofer
(DSW-M330) Center speaker system
(SC-CM330)
AV surround
amplifier
Surround speaker systems
(SC-AM330) Front speaker systems (SC-AM330)
Set these at the sides of the TV or
screen with their front surfaces as flush
with the front of the screen as possible.
 

29
ENGLISH
4Play the DVD. The display changes as shown below,
depending on the type of disc.
Example: When playing a pre-recorded ( ) disc.
 G DI IT DL A DV
D TS    D     DV
Example:  When playing a pre-recorded ( ) disc
A UTO ST D     DV
Example:  When playing a pre-recorded ( ) disc
5Adjust the volume.
•When the input mode is set to “AUTO” and the surround
mode is set to “AUTO DECODE”, depending on the signals
of the disc being played, Dolby Digital, DTS or PCM is
selected and the signals are...

30
ENGLISH
15
3
5 23 1
(2) Input mode setting
1Press the FUNCTION button to select the input function to be
played.
•The function switches as shown below.
•The function only changes in the “Æ” direction when
operated from the remote control unit.
•Factory default (TAPE) = TAPE
DVDTUNER TV/AUX1AUX2 (TAPE)
Main unit Remote control unit
2When DVD, TV/AUX1, AUX2 was selected as the input
function, press the remote control unit’s INPUT MODE button
to select the input mode.
•Consider “AUTO” as standard...