Dell R730 Manual
Have a look at the manual Dell R730 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Viewing Integrated Devices To view the Integrated Devices screen, perform the following steps: 1.Turn on, or restart your system. 2.Press F2 immediately after you see the following message: )2 = System Setup NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart your system and try again. 3.On the System Setup Main Menu screen, click System BIOS. 4.On the System BIOS screen, click Integrated Devices. Related links Integrated Devices Integrated Devices details Integrated Devices details The Integrated Devices screen details are explained as follows: OptionDescriptionUSB 3.0 SettingEnables or disables the USB 3.0 support. Enable this option only if your operating system supports USB 3.0. If you disable this option, devices operate at USB 2.0 speed. USB 3.0 is enabled by default.User Accessible USB PortsEnables or disables the USB ports. Selecting Only Back Ports On disables the front USB ports, selecting All Ports Off disables all USB ports. The USB keyboard and mouse operate during boot process in certain operating systems. After the boot process is complete, the USB keyboard and mouse do not work if the ports are disabled. NOTE: Selecting Only Back Ports On and All Ports Off disables the USB management port and also restricts access to iDRAC features. Internal USB PortEnables or disables the internal USB port. This option is set to Enabled by default.Integrated RAID ControllerEnables or disables the integrated RAID controller. This option is set to Enabled by default.Integrated Network Card 1Enables or disables the integrated network card.Embedded NIC1 and NIC2NOTE: The Embedded NIC1 and NIC2 options are only available on systems that do not have Integrated Network Card 1. Enables or disables the Embedded NIC1 and NIC2 options. If set to Disabled, the NIC may still be available for shared network access by the embedded management controller. The embedded NIC1 and NIC2 options are only available on systems that do not have Network Daughter Cards (NDCs). The Embedded NIC1 and NIC2 option is mutually exclusive with the Integrated Network Card 1 option. Con
OptionDescriptionOS Watchdog TimerIf your system stops responding, this watchdog timer aids in the recovery of your operating system. When this option is set to Enabled, the operating system initializes the timer. When this option is set to Disabled (the default), the timer does not have any e
OptionDescriptionNOTE: Every time the system boots, the BIOS syncs the serial MUX setting saved in iDRAC. The serial MUX setting can independently be changed in iDRAC. Loading the BIOS default settings from within the BIOS setup utility may not always revert the serial MUX setting to the default setting of Serial Device 1.External Serial ConnectorEnables you to associate the External Serial Connector to Serial Device 1, Serial Device 2, or the Remote Access Device by using this option. NOTE: Only Serial Device 2 can be used for Serial Over LAN (SOL). To use console redirection by SOL, configure the same port address for console redirection and the serial device. NOTE: Every time the system boots, the BIOS syncs the serial MUX setting saved in iDRAC. The serial MUX setting can independently be changed in iDRAC. Loading the BIOS default settings from within the BIOS setup utility may not always revert this setting to the default setting of Serial Device 1. Failsafe Baud RateSpeci
OptionDescriptionand system reset is needed for ISC results to be applied. The Enabled - No Reboot option executes ISC and continues without applying ISC results until the next time system reset occurs. The Enabled option executes ISC and forces an immediate system reset so that ISC results can be applied. It takes the system longer to be ready due to the forced system reset. When disabled, ISC does not execute. Related links Miscellaneous Settings Viewing Miscellaneous Settings iDRAC Settings utility The iDRAC settings utility is an interface to set up and con
Dell Lifecycle Controller Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment, con
Menu itemDescriptionLaunch Lifecycle ControllerExits the Boot Manager and invokes the Dell Lifecycle Controller program.System UtilitiesEnables you to launch System Utilities menu such as System Diagnostics and UEFI shell. Related links Boot Manager Viewing Boot Manager One-shot BIOS boot menu One-shot BIOS boot menu enables you to select a one-shot boot device to boot from the following options: