Dell R730 Manual

Removing a cooling fan
Prerequisites
1.Follow the safety guidelines listed in the Safety instructions section.
2.Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support  team. Damage due to servicing that is not authorized by Dell is not covered...

Installing a cooling fan
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support  team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
1.Follow the safety guidelines listed in the Safety...

Cooling fan assembly
The cooling fan assembly is an essential part of a server

2.Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the cooling fan assembly
After working inside your system
Installing the cooling fan assembly
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support...

5.cooling fan connector (6)6.guide pin on the chassis (6)
Next steps
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
After working inside your system
System memory
The system supports DDR4 registered DIMMs (RDIMMs) and load reduced DIMMs (LRDIMMs). System memory holds the instructions that are executed by the processor.
NOTE: MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating...

Figure 27. Memory socket locations
Memory channels are organized as follows:
Table 35. Memory channelsProcessorChannel 0Channel 1Channel 2Channel 3Processor 1Slots A1, A5, and A9Slots A2, A6, and A10Slots A3, A7, and A11Slots A4, A8, and A12Processor 
2Slots B1, B5, and B9Slots B2, B6, and B10Slots B3, B7, and B11Slots B4, B8, and B12
The following table shows the memory populations and operating frequencies for the supported  con

DIMM TypeDIMMs Populated/
ChannelVoltageOperating Frequency (in  MT/s)Maximum DIMM Rank/
Channel22400, 2133, 1866Quad rank32133, 1866Quad rank
General memory module installation guidelines
NOTE: Memory  configurations  that fail to observe these guidelines can prevent your system from booting, stop 
responding during memory  configuration, or operating with reduced memory.
The system supports Flexible Memory  Con

In this mode, one rank per channel is reserved as a spare. If persistent correctable errors are detected on a rank, the data from this rank is copied to the spare rank, and the failed rank is disabled.
With memory sparing enabled, the system memory available to the operating system is reduced by one rank per channel. For example, in a dual-processor  con

System 
capacity (in 
GB)DIMM size 
(in GB)Number of 
DIMMsDIMM rank, organization, and frequencyDIMM slot population1R, x8, 2133 MT/s484121R, x8, 1866 MT/sA1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, 
A12861R, x8, 2400 MT/s
1R, x8, 2133 MT/s
A1, A2, A3, A4, A5, A6968121R, x8, 1866 MT/sA1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A121662R, x8, 2400 MT/s
2R, x8, 2133 MT/s
A1, A2, A3, A4, A5, A61281682R, x8, 2400 MT/s
2R, x8, 2133 MT/s
A1, A2, A3, A4, A5, A6, A7, A812814R, x4, 2400 MT/sA11448101R, x8,...

Table 39. Memory configurations