Dell R730 Manual

failure, you may need to rectify the environmental conditions. Re-mediation of environmental conditions is the responsibility of the customer.Table 29. Particulate contamination  specificationsParticulate contaminationSpecificationsAir 

Expanded operating temperatureSpecificationsFor temperatures between 35

4
Initial system setup and configuration
Setting up your system
Complete the following steps to set up your system:
1.Unpack the system.
2.Install the system into the rack. For more information about installing the system into the rack, see your system Rack Installation 
Placemat 
at Dell.com/poweredgemanuals.
3.Connect the peripherals to the system.
4.Connect the system to its electrical outlet.
5.Turn the system on by pressing the power button or by using iDRAC.
6.Turn on the attached peripherals....

3.Click Drivers & Downloads.
The drivers that are applicable to your selection are displayed.
4.Download the drivers you need to a USB drive, CD, or DVD.
35 

5
Pre-operating system management applications
You can manage basic settings and features of a system without booting to the operating system by using the system 

System Setup details
The System Setup Main Menu screen details are explained as follows:
OptionDescriptionSystem BIOSEnables you to con

System BIOS Settings details
The System BIOS Settings screen details are explained as follows:
OptionDescriptionSystem InformationSpeci

Related links
Boot Settings
Boot Settings details
Choosing the system boot mode
Changing the boot order
Boot Settings details
The Boot Settings screen details are explained as follows:
OptionDescriptionBoot ModeEnables you to set the boot mode of the system.
CAUTION: Switching the boot mode may prevent the system from booting if the operating system 
is not installed in the same boot mode.
If the operating system supports UEFI, you can set this option to UEFI. Setting this  

3.After the system boots in the speci