Dell R730 Manual

OptionDescriptionOptionDescriptionDrive TypeSpeci

Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
1.Turn on, or restart your system.
2.Press F2 immediately after you see the following message:
)2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then 
restart your system and try again.
3.On the System Setup Main Menu screen, click System BIOS.
4.On the System BIOS screen, click Integrated Devices.
Related links
Integrated Devices...

OptionDescriptionOS Watchdog 
TimerIf your system stops responding, this watchdog timer aids in the recovery of your operating system. When 
this option is set to 
Enabled, the operating system initializes the timer. When this option is set to Disabled 
(the default), the timer does not have any  e

OptionDescription

OptionDescriptionNOTE: Every time the system boots, the BIOS syncs the serial MUX setting saved in iDRAC. The 
serial MUX setting can independently be changed in iDRAC. Loading the BIOS default settings  from within the BIOS setup utility may not always revert the serial MUX setting to the default  setting of Serial Device 1.External Serial 
ConnectorEnables you to associate the External Serial Connector to Serial Device 1, Serial Device 2, or the Remote  Access Device by using this option.
NOTE: Only...

OptionDescriptionSystem ProfileSets the system  pro

Related links
System Pro

OptionDescriptionand system reset is needed for ISC results to be applied. The Enabled - No Reboot option executes ISC and 
continues without applying ISC results until the next time system reset occurs. The 
Enabled option executes 
ISC and forces an immediate system reset so that ISC results can be applied. It takes the system longer to  be ready due to the forced system reset. When disabled, ISC does not execute.
Related links
Miscellaneous Settings
Viewing Miscellaneous Settings
iDRAC Settings...

Dell Lifecycle Controller
Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment, con

Menu itemDescriptionLaunch Lifecycle 
ControllerExits the Boot Manager and invokes the Dell Lifecycle Controller program.System UtilitiesEnables you to launch System Utilities menu such as System Diagnostics and UEFI shell.
Related links
Boot Manager
Viewing Boot Manager
One-shot BIOS boot menu
One-shot BIOS boot menu enables you to select a one-shot boot device to boot from the following options: