Dell Projector 7700 User Manual
Have a look at the manual Dell Projector 7700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Using Your Projector71 Audio Projection Installation Audio Projection only supports the Wireless Display and LAN Display input source. Minimum system requirements as follow: Operating System: •Windows Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit recommended), Windows Vista 32-bit, or Windows® 7 Home or Professional 32-bit or 64-bit •MAC MacBook Pro and above, MacOS 10.5 and above Minimum Hardware: a Intel® Core™ i5-460 MHz (2.53 GHz/Turbo 2.8 GHz) or greater b1 GB DDR3 VRAM independent graphics card or more recommended c2 GB dual channel DDR3 SDRAM memory at 1066 MHz required or more recommended dGigabit Ethernet eIntegrated 802.11 b/g/n Wi-Fi Device for a WLAN connection NOTE: If your computer does not meet the minimum hardware requirements, audio projection may have lag or noise. Meet the recommended system requirements to have optimized performance of audio projection. NOTE: If you want to use wireless for audio projection, need installed the optional wireless dongle. See Installing the Optional Wireless Dongle on page 11. NOTE: The audio projector function needs an extra driver to be installed. A pop-up screen will alert you if your computer needs to install the driver. You can download the Audio Projection Driver from the Dell Support site at support.dell.com. NOTE: Ports / Protocol for connection to the projector for projection via Ethernet: UDP: 1047, (backup: 1048, 1049) TCP: 3268, 515, 1688, 1041(backup: 389, 8080, 21)
72Using Your Projector Enable Wireless or LAN on the Projector 1Connect the power cable and turn on the projector by pressing the power button. 2.1If the LAN is used for audio projection, follow these steps to enable Wireless and LAN function (default is Enabled): Advanced Settings LAN Settings Wireless and LAN Enabled. 2.2If the Wireless is used for audio projection, follow these steps to enable wireless connection (default is Connected): Advanced Settings Wireless Settings Wireless Connected.
Using Your Projector73 3Access the Input Source menu, select the Wireless/USB and then select the Wireless Display on the sub-menu. The Wireless Guide Screen shown below appears: 4 Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP ADDRESS . You will need these information to log in later. Install the Wireless Application Software on Your Computer 5Wireless Application Software is required if the Wireless or LAN is used for the Audio Projection set-up. Please download and install the software the first time you use Audio Projection. If it is already installed, skip Step 5 - 6. NOTE: You only need to install the Wireless Application Software once. 6 Wireless Application Software download and install steps refer to steps 7 to 12 of the Wireless Networking Installation on page 55.
74Using Your Projector NOTE: If the LAN is used for audio projection, connect the LAN cable to the projector and the computer. Launch the Wireless Application 7Once the installation is complete, the program will launch automatically. Or you can double-click the icon on the desktop to start the application. NOTE: 1When you select the LAN for projection, click Skip. 2When you select the Wireless for projection, select the Dell 7700FullHD, and the click OK.
Using Your Projector75 Login 8To communicate with your projector, enter the Login Code (see Step 4), and then click OK. NOTE: If the IP Address is not detected, enter the IP Address displayed at the bottom left corner of the wireless screen. 9 You are now logged into the 7700FullHD Wireless Application. Click the Play button in the application to starting the LAN or wireless projection. NOTE: You may use the controls to either project in full screen mode or in split screen mode. 10 Click the Audio Projection button in the application to enable Audio Projection function. NOTE: Audio projector function need install extra driver, if your computer do not install driver, will pop-up need install driver message on screen. You can download the extra driver from the Dell Support site at support.dell.com. 11 Executing the Windows Media Player or others audio player software (example: Winamp player...) on your computer.
76Using Your Projector Video Stream Installation Video Stream only supports the Wireless Display and LAN Display input source. Minimum system requirements as follow: Operating System: •Windows Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit recommended), Windows Vista™ 32-bit, or Windows® 7 Home or Professional 32-bit or 64-bit •MAC MacBook Pro and above, MacOS 10.5 and above Minimum Hardware: a Dual® Core™ 1.8 GHz or greater b64 MB VRAM independent graphics card or more recommended c2 GB DDR SDRAM memory or more recommended dGigabit Ethernet eIntegrated 802.11 b/g/n Wi-Fi Device for a WLAN connection NOTE: If your computer does not meet the minimum hardware requirements, video stream may have lag. Meet the recommended system requirements to have optimized performance of the video stream. NOTE: If you want to use wireless feature, need installed the optional wireless dongle. See Installing the Optional Wireless Dongle on page 11. NOTE: Ports / Protocol for connection to the projector for projection via Ethernet: Video Stream Support Format UDP: 1047, (backup: 1048, 1049) TCP: 3268, 515, 1688, 1041(backup: 389, 8080, 21) File Format Video Format Max Resolution Audio Format MP4, MOV H.263 FWVGA (854x480) AAC LC, LPCM MP4, MOV H.264 Up to 720P30 AAC LC, LPCM, MP3 MP4, MOV MPEG-4 Up to 720P30 AAC LC, LPCM, MP3 ASF WMV9/VC-1 Up to 720P24 WMA
Using Your Projector77 Enable Wireless or LAN on the Projector Please refer to steps 1 to 4 of the Audio Projection Installation on page 71 for instructions to enable wireless or LAN feature. Install the Wireless Application Software on Your Computer Please refer to steps 5 to 6 of the Audio Projection Installation on page 73 for instructions to install the Dell Wireless Application Software. Launch the Wireless Application Please refer to step 7 of the Audio Projection Installation on page 74 for instructions to launching the application.. Login Please refer to step 8 of the Audio Projection Installation on page 75 for instructions to log-in the application. 1 You are now logged into the 7700FullHD Wireless Application. Click Video Mode button switch to Video Mode screen. 2Click to select the video or music files and starting player. NOTE: Select the video or music file, then press Play. The projector will enter hibernate mode first, it will playback the video or music file after a few seconds.
78Using Your Projector Managing the Projector From Web Management Configuring the Network Setting If the projector is connected to a network, you can access the projector using a web browser. For configuring the network setting, refer to LAN Settings on page 47. Accessing Web Management Use Internet Explorer 6.0 and above or Firefox 2.0 and above and enter the IP address. You can now access Web Management and manage the projector from a remote location. Home Page • Access the Web Management Home page by entering the projector’s IP address at the web browser. See LAN Settings on page 47. • Select the language for web management from the list. • Click any menu item on the left tab to access the page.
Using Your Projector79 Download the Wireless Application Software See also Wireless Networking Installation on page 55. Click the Download button of the corresponding operating system of your computer.
80Using Your Projector Conference Control This allows you to host conference presentations from different sources without using projector cables and lets you control how each presentation will appear on screen. NOTE: Without Conference Play Control, the last user to hit the Play button on the application will take control of the full-screen projection. Computer Name: Lists the computers logged for conference control. Play Control: Click the buttons to control how each computer’s projection will appear on screen. • Full screen projection — The presentation from the computer occupies the whole screen. • Split 1 - The presenation from the computer appears on the upper left corner of the screen. • Split 2- The presenation from the computer appears on the upper right corner of the screen. • Split 3- The presenation from the computer appears on the lower left corner of the screen. • Split 4- The presenation from the computer appears on the lower right corner of the screen. • Stop - Projection from the computer is stopped. IP Address: Shows each computer’s IP Address. NOTE: To end the conference, click Home.