Dell Projector 7700 User Manual
Have a look at the manual Dell Projector 7700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Using Your Projector61 Launch the Wireless Application Once the installation is complete, the program will launch and search automatically. If the program not launch automatically, you can double-click the icon on the desktop to start the application. Select the Dell 7700FullHD, and then click OK. Login To communicate with your projector, enter the Login Code provided in Step 6 of Wireless Networking Installation, then click OK. NOTE: If the IP Address is not detected, enter the IP Address displayed at the bottom left corner of the screen.
62Using Your Projector Understanding the Buttons After a successful log in, the following screen appears: Projection Mode Item Description 1Status BarDisplays IP and LOGIN CODE information. Menu Click to activate the application menu. Minimize button Click to minimize the application. Close button Click to exit the application. 2Status Mode Projection Mode Click to activate the projection mode. Video Mode Click to activate the video mode. 3Controls Toolbar Full screen Click to project the image in full screen. Split 1 Click to project the image in the upper left corner of the screen. Split 2 Click to project the image in the upper right corner of the screen. Split 3 Click to project the image in the lower left corner of the screen. Split 4 Click to project the image in the lower right corner of the screen. Stop Click to stop projection. Pause Click to pause projection. Audio Projection Click to enable audio projection. 4Connection Status Connection Icon Blinks when projection is in progress. 1 2 4 3
Using Your Projector63 Projecting the Presentation • To project the presentation, click any of the projection buttons . • To pause the presentation, click . The icon turns green. • To continue the presentation, click again. • To audio projection the presentation, click . See Audio Projection Installation on page 71. • To stop the presentation, click . Video Mode NOTE: The following information is for wireless data presentation mode only. Image display could be slow or not displayed smoothly if displaying a video clip or animation. Refer to the frame-rate table below for reference: Frame Rate of Wireless Presentation Item Description 1Control Toolbar Open Click to open folder and searching the video or music file. Play Click to starting player. Stop Click to stop player. Mute Click to mute/un-mute. Screen Variation % 1Estimated frames per second 2
64Using Your Projector NOTE: 1The percentage of screen variation is based on 1024 x 768. Example to display a 320 x 240 video clip on 1024 x 768 desktop, the screen variation is 9.8%. 2Actual frame rate could be different depending on factors such as network environment, image content, signal conditions, locations, and CPU performance. 3Under clean WLAN environment using 802.11g connection, and no screen stretching. 4Compressed to 1024 x 768 and under 802.11g. NOTE: Your computer will not enter S1 (standby mode) / S3 (sleep mode) / S4 (hibernate mode) when running a wireless, USB Display, or USB Viewer presentation. Using the Menu Click to display the menu. W EB MANAGEMENT—Click to open the Web Management page. See Managing the Projector From Web Management on page 78. SEARCH FOR PROJECTOR—Click to search and connect to wireless projector. MAKE APPLICATION TOKEN—Click to make application token. See Make Application Token on page 99. INFO—Click to display system information. HOTKEY—Click to display the hotkey information. ABOUT—Click to display the application version. EXIT—Click to close the application.
Using Your Projector65 Presentation to Go (PtG) Installation Minimum system requirements to install PtG are as follow: Operating System: -Windows Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit recommended), Windows Vista 32-bit, or Windows ® 7 Home or Professional 32-bit or 64-bit - Office 2003 or Office 2007 In order to use your USB Viewer, you need to complete the steps below: Wireless and LAN option and Wireless connection default are enabled. 1Plug the USB Flash drive to your projector. NOTE: •Supports only the JPEG format photo within 10 MB x 40 M pixels. •The PtG converter can convert your PowerPoint files into PtG files. See Install the PtG Converter Application Software on Your Computer on page 69. •You can download the PtG Converter - Lite from the Dell Support site at support.dell.com. 2 At INPUT SOURCE menu, select Wireless/USB and then select USB Viewer on the sub-menu. See INPUT SOURCE WIRELESS/USB on page 38. NOTE: 1When the Wireless and LAN function is disabled , Go to LAN Settings menu, select the Enabled in the Wireless and LAN option to activate the Wireless and LAN function. 2When the Wireless connection is disconnected, Go to Wireless Settings menu, select the Connected in the Wireless option to enable wireless connection.
66Using Your Projector PtG Viewer System will stay in this page when ready. Photo Viewer
Using Your Projector67 PtG/Photo Function Introduction Show valid PtG and Photo files which are stored in the USB disk. NOTE: If only one disk is detected, the system will skip this step. PtG Overview
68Using Your Projector Photo Overview NOTE: Supports 14 languages of photo files name format (Languages: English, Dutch, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, and Traditional Chinese). Buttons-Introduction Use the up, down, and left buttons to navigate and button on your projectors control panel or remote control to select. NOTE: If you enter the OSD menu while using PtG, PtG navigation by the up, down, and left buttons will not function. ButtonUp Down Left Right Enter PtG functionUp Down Back No function Enter PtG PlaybackPre Page Next Page Back No function Next Pause Photo functionUp Down Back No function Enter Photo PlaybackPre Page Next Page Back No function No function
Using Your Projector69 Install the PtG Converter Application Software on Your Computer Please follow the on-screen instructions to complete the setup. NOTE: You can download the PtG Converter - Lite from the Dell Support site at support.dell.com.
70Using Your Projector Using the PtG Converter 1Launch the PtG Converter - Lite.exe or double-click the icon on the desktop to start the application. 2Click to select a PowerPoint file and start conversion. 3Click Browse button to select the storage location and then press OK. NOTE: 1If your computer does not have MS PowerPoint installed, file convert will fail. 2PtG converter only supports up to 20 pages. 3PtG converter only supports conversion of .ppt files to .PtG files.