dell latitude c810 User Manual

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
Removing the Battery Charger Board 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the keyboard. 
3.  Remove the
 hinge cover. 
4.  Remove the
 display assembly. 
5.  Remove the 
palmrest assembly. 
6.  Remove the 
video graphics board. 
7.  Lift the battery charger board out of the system board connector. 
Replacing the Battery Charger Board 
Align the screw holes on the battery charger board with the...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
down into its connector. 
LED Board 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
LED Board 
 
file:///F|/Service%20Manuals/Dell/Latitude/c810/2e40520.htm (45 of 50)\
 [2/28/2004 8:02:02 AM] 

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
Removing the LED Board 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the
 hinge cover. 
3.  Remove the two 4-mm screws. 
4.  Lift the LED board away from its connector. 
Replacing the LED Board 
1.  Align the two screw holes with the two mounting holes on the bottom \
case  assembly, and press the board into its connector. 
2.  Replace the two 4-mm screws. 
Fan Assembly 
NOTICE: Disconnect the computer...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
Removing the Fan Assembly 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the system board. 
3.  Remove the three 4-mm screws from the fan assembly. 
4.  Disconnect the two fan cables from the system board. 
5.  Pull the fan assembly away from the back-panel bracket. 
NOTICE: When reconnecting the fan cables, connect the shorter cable to the 
connector closest to the fan assembly. Route both cables so...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
RJ-11 and RJ-45 Connector Covers 
 
Removing the Protective Covers From the RJ-11 
and RJ-45 Connectors 
Remove a plastic connector cover (if necessary) by slipping a nonmarri\
ng tool into the...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
Removing the RJ-11/RJ-45 Board 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the 
system board. 
3.  Remove the 4-mm screw from the RJ-11/RJ-45 board. 
NOTICE: The plastic tab is fragile; pull it back only far enough to remove the 
board assembly. 
4.  Reach into the enclosure and, while pulling the tall plastic tab awa\
y from the  board assembly to release it, lift out the assembly. 
When replacing...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/c810/2e40520.htm (50 of 50)\
 [2/28/2004 8:02:02 AM]