dell latitude c810 User Manual

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
3.  Reinstall the 4-mm screw that secures the flex cable mounting bracke\
t to the top cover. 
4.  Starting on the left side, use a magnetic screwdriver to reinstall t\
he six 3-mm  screws that secure the display panel in the top cover. 
5.  Reinstall the display flex cable strain-relief screw and reconnect t\
he flex cable to  the graphics card. 
6.  Reinstall the display assembly bezel. 
Removing the Display Latch 
Removing the Display...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
4.  Remove the display panel from the top cover. 
5.  Remove the display latch by unsnapping the latch and captive spring.\
 
Microprocessor Thermal Cooling Assembly 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
Retaining Clip 
 
Removing...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
Assembly 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the 
keyboard. 
3.  Remove the
 hinge cover. 
4.  Insert a flat-blade screwdriver into the latch mechanism at the left\
 side of the  microprocessor retaining clip. Pry open the clip by pivoting the top of \
the 
screwdriver toward the right side of the computer. 
Microprocessor Thermal Cooling Assembly 
 
NOTICE: To ensure maximum cooling for the...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
Microprocessor Module 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
Microprocessor Module 
 
Removing the Microprocessor Module 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the
 keyboard. 
3.  Remove...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the 
heat transfer areas on the thermal cooling assembly. The oils in your sk\
in 
reduce the heat transfer capability of the thermal pads. 
4.  Remove the
 microprocessor thermal cooling assembly. 
NOTICE: When removing the microprocessor module, pull the module straight 
up. Do not bend the pins. 
5.  Remove the microprocessor module. 
NOTICE: To avoid damage to the...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
b.  Use the microprocessor extraction tool to remove the microprocessor \
 module. 
Replacing the Microprocessor Module 
NOTICE: If you received a flash BIOS update program diskette or CD with the 
replacement microprocessor, you must update the BIOS after replacing the\
 
microprocessor module. For instructions on updating or reflashing the BI\
OS, see 
the Dell Portable Computer BIOS Update Guide. 
NOTICE: Proper seating of the...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
NOTICE: Hold the microprocessor down while turning the cam lock screw to 
prevent intermittent contact between the cam lock screw and microprocess\
or 
(see 
Microprocessor Cam Lock Screw). 
2.  Tighten the cam lock screw. 
NOTICE: Do not over- or undertighten the screw. Tighten it until the screw 
indicator points to the closed or locked indicator on the socket. 
3.  Replace the microprocessor thermal cooling assembly. 
Closing the...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
screwdriver into the latch mechanism and pivot the top of the screwdrive\
r away 
from the clip to close the latch. 
Video Graphics Board 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
Video Graphics Board 
 
Removing the Video Graphics...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
2.  Remove the keyboard. 
3.  Remove the
 hinge cover. 
4.  Detach the
 display flex cable from the strain relief and the graphics card. 
5.  Remove the three 8-mm screws that secure the video graphics board. 
6.  Separate the video graphics board from the system board connector. 
Replacing the Video Graphics Board 
1.  Align the three screw holes and press down firmly on the word Dell\
 to seat the  board in its connector. 
NOTICE: Make...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
NOTICE: The reserve battery provides power to the computers time RTC and 
NVRAM when the computer is turned off. Removing the palmrest disconnects\
 
the reserve battery and causes the computer to lose the date and time 
information as well as all user-specified parameters in NVRAM. If possib\
le, make 
a copy of this information before you disconnect the reserve battery. 
Removing the Palmrest Assembly 
1.  Follow the instructions in...