dell latitude c810 User Manual

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
NOTICE: To avoid damaging the palmrest assembly, you must first remove the 
display assembly. 
6.  Turn the computer over. 
7.  Remove the nine 20-mm screws (labeled with a circle P) that secu\
re the  palmrest to the computer. 
Palmrest Screws 
 
8.  Turn the computer over. 
9.  Use the pull loop to disconnect the palmrest flex cable from the tou\
ch- pad  connector on the system board....

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
10.  Carefully lift out the palmrest assembly. 
Reserve Battery 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
Reserve Battery 
 
file:///F|/Service%20Manuals/Dell/Latitude/c810/2e40520.htm (35 of 50)\
 [2/28/2004 8:02:02 AM] 

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
NOTICE: The reserve battery provides power to the computers RTC and 
NVRAM when the computer is turned off. Removing the battery causes the 
computer to lose the date and time information as well as all user-speci\
fied 
parameters in NVRAM. If possible, make a copy of this information before\
 you 
remove the reserve battery. 
Removing the Reserve Battery 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
7.  Remove the two 4-mm screws securing the palmrest bracket. 
8.  While supporting the palmrest flex cable, lift out the palmrest brac\
ket and turn it  over. 
9.  Disconnect the reserve battery cable. 
10.  Remove the reserve battery:  a.  Pry the reserve battery free from the metal palmrest bracket. 
b.  Remove the foam-pad remnants from the palmrest bracket. 
Replacing the Reserve Battery 
1.  Seat the reserve battery and press it...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
4.  Replace the two 4-mm screws that secure the palmrest bracket to the \
palmrest. 
System Board Assembly 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
System Board Screws 
file:///F|/Service%20Manuals/Dell/Latitude/c810/2e40520.htm (38...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
The system boards BIOS chip contains the system service tag number, whi\
ch is also 
visible on a bar-code label on the bottom of the computer. 
The replacement kit for the system board assembly includes a diskette or\
 CD that 
provides a utility for transferring the service tag number to the replac\
ement system 
board assembly. 
NOTICE: If you received a flash BIOS update program diskette or CD with the 
replacement microprocessor,...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the hard drive and the
 fixed optical drive. 
3.  Remove any installed
 Mini PCI Cards. 
4.  If migrating the memory, remove all installed 
memory modules. 
5.  Remove the 
keyboard. 
6.  Remove the
 hinge cover. 
7.  Remove the
 display assembly. 
8.  Remove the 
palmrest assembly. 
9.  Remove the
 video graphics board. 
10.  Remove the
 microprocessor...

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
Battery and Modular Bay Latch Assemblies 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
Battery and Modular Bay Latch Assemblies 
file:///F|/Service%20Manuals/Dell/Latitude/c810/2e40520.htm (41 of 50)\
 [2/28/2004 8:02:02 AM] 

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
 
Removing and Replacing the Battery and Modular 
Bay Latch Assemblies 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the 
keyboard. 
3.  Remove the
 hinge cover. 
4.  Remove the
 display assembly. 
file:///F|/Service%20Manuals/Dell/Latitude/c810/2e40520.htm (42 of 50)\
 [2/28/2004 8:02:02 AM] 

Removing and Replacing Parts : Dell Latitude C810 Service Manual 
5.  Remove the palmrest assembly. 
6.  Remove a latch button from the bottom case assembly by squeezing the\
 snap  tabs in the center of the latch. 
Apply downward pressure to the tabs while squeezing them together (twee\
zers 
work well) to eject the latch button from the bottom of the case withou\
t loosening 
the upper latch assembly (spring and slider). If the upper latch assem\
bly does 
come loose: a.  Reinsert the spring onto the...