DELL 1355cn User Manual

							Copying249
5Press the   (Start) button to begin copying.
Margin Middle
To specify the middle margin of the copy.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Press the   (Copy) button.
3Press the   button until Margin Middle is highlighted, and then 
press the   button.
4Press the   or   button or enter the desired value using the numeric 
keypad, and then press the   button.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
5Press the   (Start) button to begin copying.
4 mm*/0.2 
inch*Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-
2.0 inch
0 mm*/
0.0 inch*Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/
0.0-2.0 inch
 
						

							250Copying
Changing the Default Settings
The COPY menu options, including contrast, and image quality can be set to 
the most frequently used modes. When you copy a document, the default 
settings are used unless they are changed by using the corresponding buttons 
on the operator panel.
 NOTE: While you set copy options, pressing the AC (All Clear) button cancels the 
changed settings and returns to the default status.
To create your own default settings:
1
Press the   (Menu) button.
2Press the   button until System is highlighted, and then press the   
button.
3Ensure that Defaults Settings is highlighted, and then press the 
 button.
4Ensure that Copy Defaults is highlighted, and then press the   
button.
5Press the   button until the desired menu item is highlighted, and then 
press the   button.
6Press the   or   button until the desired setting is highlighted or enter 
the value using the numeric keypad, and then press the   button.
7Repeat steps 5 and 6, as needed.
8To return to the previous screen, press the   (Back) button.
Setting the Power Saver Timer Option
You can set the power saver timer for the printer. The printer waits before it 
restores the default copy settings, if you do not start copying after changing 
them on the operator panel.
1
Press the   (Menu) button.
2Press the   button until System is highlighted, and then press the   
button.
3Press the   button until Admin Menu is highlighted, and then press 
the  button.
 
						

							Copying251
4Press the   button until System Settings is highlighted, and then 
press the   button.
5Ensure that Power Saver Timer is highlighted, and then press the 
 button.
6Press the   button to select Mode 1 or Mode 2, and then press the   
button.
7Press the   or   button or enter the desired value using the numeric 
keypad, and then press the   button.
You can select from 5
–30 minutes for Mode 1 or 1–6 minutes for Mode 
2
.
8To return to the previous screen, press the   (Back) button.
 
						

							252Copying
 
						

							Scanning253
17
Scanning
Scanning Overview
You can use your Dell™ 1355cn/1355cnw Multifunction Color Printer to turn 
pictures and text into editable images on your computer. 
Pa p e r Po r t
® is a program that enables you to organize, find and share all your 
paper and digital documents, and is supplied with your printer.
The resolution setting to use when you scan an item depends on the item 
type and how you plan to use the image or document after you scan it in to 
your computer. For the best results, use these recommended settings. 
Scanning beyond these recommended resolutions may exceed the capabilities 
of the application. If you require a resolution above those recommended in 
the above table, you should reduce the size of the image by previewing (or 
pre-scan) and cropping before scanning the image.
 NOTE: You can use PaperPorts built-in Optical Character Recognition (OCR) 
software to copy text from scanned documents so that you can use and edit the text 
in any text editing, word processing, or spreadsheet program. The OCR process 
requires textual images scanned at 150–600 dpi and 300 dpi or 600 dpi is 
recommended for graphics. Type Resolution
Documents 300 dpi black-and-white or 200 dpi 
grayscale or color
Documents of poor quality or that 
contain small text400 dpi black-and-white or 300 dpi 
grayscale
Photographs and pictures 100–200 dpi color or 200 dpi grayscale
Images for an inkjet printer 150–300 dpi
Images for a high-resolution printer  300–600 dpi
 
						

							254Scanning
If you prefer to use another application, such as Adobe® Photoshop®, you 
must assign the application to the printer by selecting it from the list of 
available applications through the Select Software button each time you start 
scanning. If you do not assign an application to the Select Software button, 
PaperPort is automatically selected when you start scanning.
ScanDirect is a PaperPort application that enables you to scan items and send 
them directly to PaperPort or other programs on your computer without first 
running PaperPort. ScanDirect runs as a separate application from the 
Windows start menu and displays the ScanDirect bar. For more information 
about using ScanDirect, refer to the PaperPorts Help menu.
Icons on the ScanDirect bar represent the programs that are limited to 
PaperPort and to ScanDirect. To scan and send an item to a program, click the 
program icon and then scan the item. ScanDirect automatically starts the 
selected program when the scan is complete.
Scanning From the Operator Panel
 NOTE: Ensure that the printer is connected to the computer using the USB cable.
1Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Press the   (Scan) button.
3Press the   button until Scan to Application is highlighted, and 
then press the   button.
4Configure the scanning settings as necessary.
5Press the   (Start) button.
The selected application window opens on your computer.
 
						

							Scanning255
 NOTE: If the following dialog box appears on your computer, select 
1355cn/1355cnw MFP Scan Button Manager, and then click OK.
 
NOTE: Once you check the Always use this program for this action check box 
when selecting 1355cn/1355cnw MFP Scan Button Manager, the selected 
application is automatically used without displaying the program selection window.
 
NOTE: You must use ScanButton Manager on your computer to change the 
settings for scanning. For details, see Quick Launch Utility on page 410.
Scanning Using the TWAIN Driver
Your printer supports the Tool Without An Interesting Name (TWAIN) 
driver for scanning images. TWAIN is one of the standard components 
provided by Microsoft
® Windows XP, Windo ws  Server® 2003, Windows 
Server 2008, Windows Vista®, and Windows 7, and works with various 
scanners.
 NOTE: Ensure that the printer is connected to the computer using the USB cable.
 
						

							256Scanning
To scan an image from the Pa p e r Po r t:
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2On the Windows Start menu, click Nuance PaperPort 12 from All 
Programs
, and then click Pa p e r Po r t.
3Click Select, then select TWAIN: Dell 1355cn/cnw MFP Scanner, and 
then click 
OK.
4Select your scanning preferences and click Preview to display the preview 
image.
 NOTE: The illustration may vary for different operating systems.
5Select the desired properties from the Image Quality and Image Options 
tabs.
6Click Scan to start scanning.
7Follow the on-screen instructions to edit the picture after it is copied to 
your computer.
 
						

							Scanning257
Scanning Using the Windows Image Acquisition 
(WIA) Driver
Your printer also supports the WIA driver for scanning images. WIA is one of 
the standard components provided by Microsoft Windows XP and later 
operating systems and works with digital cameras and scanners. Unlike the 
TWAIN driver, the WIA driver allows you to scan an image and easily 
manipulate those images without using additional software.
 NOTE: Ensure that the printer is connected to the computer using the USB cable.
1Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Start the drawing software, such as Pa i n t for Windows.
 NOTE: When you use Windows Vista or Windows Server 2008, use Windows 
Photo Gallery instead of Paint.
3Click File From Scanner or Camera (Pa i n t button From scanner or 
camera
 for Windows Server 2008 R2 and Windows 7).
The 
Scan using Dell 1355cn/1355cnw MFP Scanner window appears.
 NOTE: The illustration may vary for different operating systems.
 
						

							258Scanning
4Select your scanning preferences and click Adjust the quality of the 
scanned picture
 to display the Advanced Properties dialog box.
5Select the desired properties including brightness and contrast, and then 
click 
OK.
6Click Scan to start scanning.
7Click Save As from the File menu.
8Enter a picture name, and select a file format and destination to save the 
picture.