DELL 1350cnw User Manual

Maintaining Your Printer267
2Pinch the cartridge firmly as shown in the illustration.
3Pull the toner cartridge out.
4Pull the other three cartridges out as well.
5Pull the cleaning rod out.
 

268Maintaining Your Printer
6Insert the cleaning rod fully into the hole beside the arrow on the printer 
until its tip reaches the interior of the printer as illustrated below, and then 
pull it out.
7Repeat the same procedure for the other three holes.
8Return the cleaning rod to its original location.
 

Maintaining Your Printer269
9Replace the black cartridge by adjusting it to the associated cartridge 
holder, and then insert it firmly by pressing near the center of the label 
until the cartridge clicks.
10Replace the other three cartridges as well.
11Close the toner access cover.
Cleaning the Color Toner Density (CTD) Sensor
Clean the CTD sensor only when an ale rt for the CTD sensor is shown on the 
Status Monitor or operator panel.
1
Ensure that the printer is turned off.
2Push the rear cover...

270Maintaining Your Printer
3Clean the CTD sensor inside the printer with a clean dry cotton swab.
4Close the rear cover.
Adjusting Color Registration
This section describes how to adjust  the color registration when you first 
install the printer or after mo ving it to a new location.
 

Maintaining Your Printer271
Performing Auto Correct
Auto Correct on the operator panel allows you to correct the color 
registration automatically.
1
Press the  (Menu) button.
2Press the   button until Admin Menu appears, and then press the   
button.
3Press the   button until Maintenance appears, and then press the   
button.
4Press the   button until Color Reg Adj appears, and then press the 
 button.
5Ensure that Auto Correct appears, and then press the   button.
6Ensure that Are you sure? appears,...

272Maintaining Your Printer
1Click Start All Programs Dell Printers Dell 1350cnw Color 
Printer
 Tool Box.
 NOTE: The Select Printer window appears in this step, when multiple printer 
drivers are installed on your computer. In this case, click the name of  Dell 
1350cnw Color Printer  listed in Printer Name, and then click OK.
The Tool Box opens.
2Click the Printer Maintenance tab.
3Select Color Registration Adjustment from the list at the left side of the 
page.
The 
Color Registration Adjustment...

Maintaining Your Printer273
Entering Values
The Operator Panel
Using the operator panel, enter the values that you found in the color 
registration chart to make adjustments. 
1
Load paper. For details about loading paper, see Loading Paper on 
page 45.
2Press the  (Menu) button.
 

274Maintaining Your Printer
3Press the   button until Admin Menu appears, and then press the   
button.
4Press the   button until Maintenance appears, and then press the   
button.
5Press the   button until Color Reg Adj appears, and then press the 
 button.
6Press the   button until Enter Number appears, and then press the   
button.
7Ensure that Enter (Y, M, C) appears, and then press the   or   
button until you reach the value (for example, +3) displayed on the chart.
8Press the   button once and...

Maintaining Your Printer275
The Tool Box
 NOTE: 
Using the Tool Box, enter the values th at you found in the color registration 
chart to make adjustments. 
1
Click Start All Programs Dell Printers Dell 1350cnw Color 
Printer
 Tool Box.
 NOTE: The Select Printer window appears in this step, when multiple printer 
drivers are installed on your computer . In this case, click the name of Dell 
1350cnw Color Printer  listed in Printer Name, and then click OK.
The Tool Box opens.
2Click the Printer...

276Maintaining Your Printer