Dell 1320c User Guide

   
3. By turning the right side of the fuser towards the rear of printer, insert the right notch into the holder inside the printer.  
 
 
   
4. Close the front cover.  
 
 
   
   
Replacing Separator Roller  
   
Keeping the separator roller in the paper tray clean helps ensure the best possible copies. Dell recommends cleaning the separator at regular intervals.  
      CAUTION:  To prevent electric shock, always turn off the printer and disconnect the power cable from the  grounded outlet before...

Dell separator rollers are available only through Dell. To order by phone, see  "Contacting Dell™" on page 215 .  
   
Dell recommends Dell separator rollers for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or 
components not supplied by Dell.  
Removing the Used Separator Roller in the Tray 1  
1. Pull the Tray 1 out of the printer carefully. Hold the tray with both hands, lift the front slightly, and remove it from the printer....

   
2. Insert the separator roller into the axle till it snaps fit so the protrusions fit completely into the slots and the roller hook reseats into the groove on the 
axle.  
 
 
   
3. Load paper and place it in the printer.  
Be sure to use the output tray extension before printing a Legal - size document.  
 
 
   
Cleaning the Separator Roller Inside the Printer  
   
Clean the separator roller inside the printer if print media does not feed correctly.  
1. Ensure that the printer is turned off....

   
 
   
4. Clean the separator roller inside the printer with a clean dry cotton swab.  
 
 
   
5. Insert the PHD unit until it stops and turn the four PHD lock levers clockwise to lock the PHD unit.  
 
  NOTE:  Keep the PHD unit in the dark place.  

   
6. Close the front cover.  
 
Cleaning the CTD Sensor Inside the Printer  
   
Clean the CTD sensor only when an alert for the CTD sensor is shown on the Status Monitor or operator panel.  
1. Ensure that the printer is turned off.  
 
2. Push the button (right side) and open the front cover.  
 
 
   
3. Clean the CTD sensor inside the printer with a clean dry cotton swab.  
 
 
   
4. Close the front cover.  
 
 
     

Adjusting Color Registration  
   
To adjust the color registration when you first install the printer or after moving it to a new location, follow the procedure below.  
Printing the Color Registration Chart   
   
Use the Tool Box to print the color registration chart.   
1. Click  Start ®   All Programs ®   Dell Printers ®   Additional Color Laser Software ®   Status Monitor Console.  
The Printer Selection dialog box opens.  
 
2. Click  Dell Color Laser 1320c  listed in Printer Name.  
The Dell...

back to contents page    CAUTION:  After printing the color registration chart, do not turn off the printer until the printer motor has stopped  running.  
NOTE:  If  0  is not next to the straightest lines, determine the values and adjust the printer again.   

back to contents page  
Printer Specifications   
   
   OS Compatibility  
   Power Supply   
   Dimensions  
   Memory  
   Page Description Language (PDL)/Emulation, Operating System, and Interface  
   Environmental  
   Cables  
OS Compatibility  
   
Your Dell™ Color Laser Printer 1320c is compatible with Windows ®
  ( Windows XP, Windows XP 64 - bit Edition, Windows Vista ®
,  Windows Server ®
  2003, 
Windows Server 2008, and Windows 2000).  
   
1
 Dell technical phone support only supports...

Page Description Language (PDL)/Emulation, Operating System, and Interface  
 
MIB Compatibility  
   
A Management Information Base (MIB) is a database containing information about network devices (such as adapters, bridges, routers, or computers). This 
information helps network administrators manage the network (analyze performance, traffic, errors, and so on). Dell Color Laser Printer 1320c complies with 
standard industry MIB specifications, allowing the printer to be recognized and managed by...

 
   
 
back to contents page