Dell 1135n User Guide

1Switches  to  
Printers configuration .
2 Shows  all of the installed  machine.
3 Shows  the status,  model name and  URI  of your  machine.
The  printer control buttons are, as follows:
Refresh : Renews  the  available  machines  list.
Add  Printer: Allows  you  to  add  a  new machines.
Remove  Printer: Removes the  selected machine.
Set as  Default: Sets  the  current selected machine as a  default machine.
Stop/Start: Stops/starts the  machine.
Test: Allows  you  to  print  a  test page  to  ensure...

1Shows  all of the machine classes.
2 Shows  the status of the class  and  the number of machines  in the class.
Refresh
: Renews  the  classes list.
Add  Class: Allows  you  to  add  a  new machine class.
Remove  Class: Removes the  selected machine class.
Scanners configuration
In this window, you can  monitor the activity of scanner  devices,  view  a  list of installed   Dell machine devices,  change
device properties, and  scan  images.
 

1Switches  to  
Scanners configuration .
2 Shows  all of the installed  scanners.
3 Shows  the vendor,  model name and  type of your  scanner.
Properties
: Allows  you  to  change  the scan  properties  and  scan  a  document.
Ports configuration
In this window, you can  view  the list of available  ports,  check  the status of each  port and  release  a  port that  is
stalled in a  busy state  when  its  users  has  terminated  the job for any reason.
 

1Switches  to  
Ports configuration .
2 Shows  all of the available  ports.
3 Shows  the port type, device connected to  the port, and  status.
Refresh
: Renews  the  available  ports list.
Release port: Releases the  selected port.
Sharing Ports Between Printers and Scanners
Your  machine may be connected to  a  host computer  via a  parallel  port or USB  port. Since the printer contains
more  than  one  device (printer and  scanner), it  is necessary  to  organize proper access  of user -installed...

Media and tray
This chapter provides  information  on how to  load  originals and  print  media into your  machine.
This chapter includes:
Preparing originals
Loading  originals
Selecting  print  media
Changing the tray  size
Loading  paper in the tray
Printing  on special media
Setting  the paper size and  type
Using the output support
Supported optional  devices and  features may differ according to  your  model.  Please  check  your  model name.
(See Features  by Model
).
Preparing originals
Do not...

2. Place  the original face down  on the scanner  glass. And  align it  with the registration  guide at the top left  corner of
the glass.
3. Close  the scanner  lid.
Leaving the scanner  lid  open while  copying may affect copy  quality and  toner consumption.
Dust on the scanner  glass may cause black  spots on the printout.  Always keep it  clean (See Cleaning
the scan  unit).
If  you are copying a  page  from  a  book  or magazine,  lift the scanner  lid  until its  hinges  are caught by
the stopper...

3. Adjust  the document feeder  width guides  to  the paper size.
Dust on the document feeder  glass may cause black  lines on the printout.  Always keep the glass clean (See
Cleaning the scan  unit
).
Selecting print media
You  can  print  on a  variety of print  media,  such as plain paper, envelopes, labels,  and  transparencies. Always use print
media that  meet the guidelines for use with your  machine.
Guidelines to select the print media
Print media that  does  not meet the guidelines outlined in...

Copy  mode Letter, A4,  Legal,  Oficio,  Folio, Executive,  ISO B5,  JIS B5,  A5,  A6Tray 1
Manual  tray
Print mode All sizes  supported by the machine.
Tray 1
Manual  tray
Fax  mode Letter, A4,  Legal
Tray 1
Changing the tray size
The  tray  is preset to  Letter or A4 size,  depending on your  country.  To change  the size,  you need  to  adjust  the paper
guides.
1. Support guide
2. Paper  length guide
3. Guide lock
4. Paper  width guide
1. With one  hand press  and  hold the guide lock,  and  with the...

Do not push the paper width guide too  far causing the media to  warp.
If  you do not adjust  the paper width guide,  it  may cause paper jams.
Do not use paper with more  than  6 mm  curl.
Loading paper in the tray
Tray 1
1. Pull out the paper tray. And  adjust  the tray  size to  the media size you are loading (See Changing the tray  size).
2. Flex or fan  the edge  of the paper stack to  separate  the pages before loading paper.
3. And  place  paper with the side  you want  to  print  facing  down.
4....

If  you select Manual Feeder  for Source  from  your  software application, you need  to  press   OK each  time you
print  a  page  and  load  only  one  type, size and  weight  of print  media at a  time in the manual tray.
To prevent  paper jams, do not add  paper while  printing when  there is still paper in the manual tray. This also
applies  to  other types of print  media.
Print media should be loaded face up  with the top edge  going  into the manual tray  first and  be placed in the
center of the...