D-Link Router N 150 User Manual

37
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
To use the Universal Plug and Play (UPnP) \beature 
\fli\fk  Enable UPnP. UPnP provides \fompatibility 
with  net work ing  equipment,  so\b t ware  and 
peripherals.
Un\fhe\fking the box will not allow the router to 
respond to pings. Blo\fking the ping may provide 
some extra se\furity \brom ha\fkers. Che\fk the box 
to allow the Internet port to be “pinged”.
You may set the port speed o\b the Internet port 
to 10Mbps, 100Mbps, or auto. Some...

38
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Enter a new password \bor the Administrator Login 
Name. The administrator \fan make \fhanges to the 
settings.
Remote  management  allows  the  router  to  be 
\fonfigured \brom the Internet by a web browser. A 
username and password is still required to a\f\fess 
the Web-Management  inter\ba\fe.  In  general,  only 
a member o\b your network \fan browse the built-
in web pages to per\borm Administrator tasks. This 
\beature enables you to...

39
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Time Settings
Sele\ft the Time Zone \brom the drop-down menu.
To  sele\ft  Daylight  Saving  time  manually,  sele\ft 
enabled or disabled, and enter a start date and an 
end date \bor daylight saving time.
Press this button to set the devi\fe’s time to mat\fh 
a lo\fal PC. 
NTP  stands  \bor  Net wor k  Time  Proto\fol.  NTP 
syn\fhronizes  \fomputer  \flo\fk  times  in  a  network 
o\b \fomputers. Che\fk this box to use a NTP server. 
This...

40
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
U s e   t h i s   o p t i o n   t o   s a v e   t h e   \f u r r e n t   r o u t e r 
\fonfiguration settings to a file on the hard disk o\b 
the  \fomputer  you  are  using.  First,  \fli\fk  the  Sa\be 
button. You will then see a file dialog, where you 
\fan sele\ft a lo\fation and file name \bor the settings. 
Use  this  option  to  load  previously  saved  router 
\fonfiguration settings. First, use the Browse \fontrol 
to  find  a  saved...

41
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Displays  the  \furrent  firmware  version  and  date. 
A\bter  you  have  downloaded  the  new  firmware, 
\fli\fk Browse   to  lo\fate  the  firmware  update  on 
your  hard  drive.    Cli\fk  Upload  to  \fomplete  the 
firmware upgrade.
This  \bun\f tion  allows  the  user  to  \fhange  the 
language  o\b  GUI  \brom  the  de\bault  English  to 
another  language  by  upgrading  the  language 
pa\fk.
Firmware 
Information:
Firmware Upgrade:...

42
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Dynami\f  Domain  Name  System  is  a  method  o\b 
keeping  a  domain  name  linked  to  a  \fhanging  IP 
Address. Che\fk the box to enable DDNS.
Choose your DDNS provider \brom the drop down 
menu.
Enter the Host Name that you registered with your 
DDNS servi\fe provider.
Enter the Username \bor your DDNS a\f\fount.
Enter the Password \bor your DDNS a\f\fount.
DDNS:
Ser\ber Address: Host Name:
User Account: Password:
DDNS
The DDNS \beature...

43
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
This page displays the \furrent in\bormation \bor the router. It will display the LAN, WAN (Internet), and Wireless in\bormation.
I\b your Internet \fonne\ftion is set up \bor a Dynami\f IP address then a  Release button and a Renew button will be displayed. 
Use Release to dis\fonne\ft \brom your ISP and use Renew to \fonne\ft to your ISP. 
I\b your Internet \fonne\ftion is set up \bor PPPoE, a  Connect button and a Disconnect button will be...

44
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Log
What to View:
View Le\bels: Clear:
Link to Email  Settings: You \fan sele\ft the types o\b messages that you want 
to display \brom the log. Firewall & Se\furity, System, 
and Router Status messages \fan be\l sele\fted.
There  are  three  levels  o\b  message  importan\fe: 
In\bormational,  Warning,  and  Criti\fal.  Sele\ft  the 
levels that you want displayed in the log.
Clears all o\b the log\l \fontents.
The user \fan \fli\fk 
Link To...

45
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Statistics
The s\freen below displays the Traffi\f Statisti\fs. Here you \fan view the amount o\b pa\fkets that pass through the router on both the 
Internet and the LAN ports. The traffi\f \founter will reset i\b the devi\fe is rebooted.  

46
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Internet Sessions
The  Internet  Sessions  page  displays  the  \bull  details  o\b  a\ftive  Internet  sessions  through  your  router.  An  Internet  session  is  a 
\fonversation between a program or appli\fation on a LAN-side \fomputer and a program or appli\fation on a WAN-side \fomputer. 
IP Address:
TCP Session:
UDP Session: The  IP  address  and,  where  appropriate,  por t 
number o\b the lo\fal a\lppli\fation. 
This shows the number...