D-Link Router DIR-626L User Manual

							67
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
IPv6 in IPv4 Tunneling
Select IPv6.in.IPv4. Tunne\b fr\bm the dr\bp-d\bwn menu.
Enter the settings sup\lplied by y\bur Internet pr\b\fider (ISP). 
Enter the LAN (l\bcal) I\lP\f6 address f\br the r\buter. 
Displays the R\buter’s LAN Link-L\bcal Address.
Check t\b enable the Aut\bc\bnfigurati\bn feature.
Select  Statefu\b. (DHCPv6),  SLAAC.+.RDNSS \br  SLAAC.+.State\bess.
DHCPv6. 
Enter  the  start  IP\f6  Address  f\br  the  DHCP\f6  range  f\br  y\bur  l\bcal 
c\bmputers.
Enter  the  end  IP\f6  Address  f\br  the  DHCP\f6  range  f\br  y\bur  l\bcal 
c\bmputers.
Enter the R\buter Ad\fertisement Lifetime (in minutes).
My IPv6 
\fonnec\bion:
IPv6 in IPv4 Tunnel  Se\b\bings:
LAN IPv6 Address: LAN Link-Local  Address:
Enable 
Au\boconfigura\bion:
Au\boconfigura\bion  Type:
IPv6 Address  Range S\bar\b:
IPv6 Address  Range End:
Pv6 Address  Life\bime:  
						

							68
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
6 \bo 4 Tunneling
Select 6.to.4 fr\bm the dr\bp-d\bwn menu.
Enter the IP\f6 settings supplied\l by y\bur Internet pr\b\fider (ISP). 
Enter the primary and sec\bndary DNS ser\fer addresses. 
Enter the LAN (l\bcal) I\lP\f6 address f\br the r\buter. 
Displays the R\buter’s LAN Link-L\bcal Address.
Check t\b enable the Aut\bc\bnfigurati\bn feature.
Select  Statefu\b. (DHCPv6),  SLAAC.+.RDNSS \br  SLAAC.+.State\bess.
DHCPv6. 
Enter  the  start  IP\f6  Address  f\br  the  DHCP\f6  range  f\br  y\bur  l\bcal 
c\bmputers.
Enter  the  end  IP\f6  Address  f\br  the  DHCP\f6  range  f\br  y\bur  l\bcal 
c\bmputers.
Enter the IP\f6 Address Lifetime (in minutes).
My IPv6 \fonnec\bion:
6 \bo 4 Se\b\bings:
Primary/Secondary  DNS Address:
LAN IPv6 Address: LAN Link-Local  Address:
Enable 
Au\boconfigura\bion:
Au\boconfigura\bion  Type:
IPv6 Address Range  S\bar\b:
IPv6 Address Range  End:
IPv6 Address  Life\bime:  
						

							69
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
6rd
Select 6rd fr\bm the dr\bp-d\bwn menu.
Enter  the  address  settings  supplied  by  y\bur  Internet  pr\b\fider 
(ISP). 
Enter the LAN (l\bcal) I\lP\f6 address f\br the r\buter. 
Displays the R\buter’s LAN Link-L\bcal Address.
Check t\b enable the Aut\bc\bnfigurati\bn feature.
Select  S\ba\beful (DH\fPv6), SLAA\f+RDNSS or SLAA\f + S\ba\beless 
DH\fPv6. 
Enter the R\buter Ad\fertisement Lifetime (in minutes).
My IPv6 \fonnec\bion:
6RD Se\b\bings:
LAN IPv6 Address:
LAN Link-Local Address: Enable 
Au\boconfigura\bion:
Au\boconfigura\bion Type:
Rou\ber Adver\bisemen\b   Life\bime:  
						

							70
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
Select Link-Loca\b. \fn\by  fr\bm  the  dr\bp-d\bwn 
menu.
Displays the IP\f6 address \bf the r\buter.
My IPv6 \fonnec\bion:
LAN IPv6 Address  Se\b\bings:
Link-Local \fonnec\bivi\by  
						

							71
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
mydlink Se\b\bings
Display the status whether y\bur de\fice is registered with a 
mydlink acc\bunt \br n\bt.
Click  t\b  g\b  t\b  the  mydlink  website  t\b  register  \br  edit  y\bur 
settings.
mydlink Service:
Regis\ber mydlink  Se\b\bings:  
						

							72
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
This will all\bw y\bu t\b \bpen a single p\brt. If y\bu w\buld like t\b \bpen a range \bf p\brts, refer t\b the next page.
Enter a name f\br the rule \br select an applicati\bn fr\bm 
the dr\bp-d\bwn menu. Select an applicati\bn and click 

						

							73
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
This will all\bw y\bu t\b \bpen a single p\brt \br a range \bf p\brts.
Por\b Forwarding
Enter  a  name  f\br  the  rule  \br  select  an  applicati\bn 
fr\bm  the  dr\bp-d\bwn  menu.  Select  an  applicati\bn 
and click 
						

							74
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
Enter  a  name  f\br  the  rule.  Y\bu  may  selec t  a   
pre-defined applicati\bn fr\bm the dr\bp-d\bwn menu 
and click 
						

							75
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
QoS Engine
This \bpti\bn is disabled by default. Enable this \bpti\bn f\br better perf\brmance 
and experience with \bnline games and \bther interacti\fe applicati\bns, such 
as V\bIP.
This \bpti\bn is enabled by default when the Q\bS Engine \bpti\bn is enabled. This 
\bpti\bn will all\bw y\bur r\buter t\b aut\bmatically determine the uplink speed \bf 
y\bur Internet c\bnnecti\bn.
This displays the detected uplink speed.
The  speed  at  which  data  can  be  transferred  fr\bm  the  r\buter  t\b  y\bur  ISP. This 
is  determined  by  y\bur  ISP.  ISP’s  \bften  speed  as  a  d\bwnl\bad/upl\bad  pair. 
F\br  example,  1.5Mbits/284Kbits.  Using  this  example,  y\bu  w\buld  enter  284. 
Alternati\fely y\bu can test y\bur uplink speed with a ser\fice such as speedtest.net.
A  Q\bS  Engine  Rule  identifies  a  specific  message  fl\bw  and  assigns  a  pri\brity 
t\b that fl\bw. F\br m\bst applicati\bns, aut\bmatic classificati\bn will be adequate, 
and specific Q\bS Engine Rules will n\bt b\le required.
The Q\bS Engine supp\brts \b\ferlaps between rules, where m\bre than \bne rule 
can match f\br a specific message fl\bw. If m\bre than \bne rule is f\bund t\b match 
the rule with the hig\lhest pri\brity will be used.
Create a name f\br the rule that is meaningful t\b y\bu.
The pri\brity \bf the message fl\bw is entered here -- 1 recei\fes the highest pri\brity (m\bst urgent) and 255 recei\fes the l\bwest pri\brity (least urgent).
The pr\bt\bc\bl used by the messages.
The rule applies t\b a fl\bw \bf messages wh\bse \lLAN-side IP address falls within the\l range set here.
The rule applies t\b a fl\bw \bf messages wh\bse \lLAN-side p\brt number is within \lthe range set here.
The rule applies t\b a fl\bw \bf messages wh\bse \lWAN-side IP address falls within the\l range set here.
The rule applies t\b a fl\bw \bf messages wh\bse \lWAN-side p\brt number is within \lthe range set here.
Enable QoS Engine:
Au\boma\bic Uplink  Speed:
Measured Uplink  Speed:
Manual Uplink Speed:\N
QoS Engine Rules:
Name:
Priori\by:
Pro\bocol:
Local IP Range:
Local Por\b Range:
Remo\be IP Range:
Remo\be Por\b Range:
The  Q\bS  Engine  \bpti\bn  helps  impr\b\fe  y\bur  netw\brk  gaming  perf\brmance  by  pri\britizing  applicati\bns.  By  default  the  Q\bS  Engine  settings  are 
disabled and applic\lati\bn pri\brity is n\bt classified a\lut\bmatically.  
						

							76
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
Ne\bwork Fil\bers
Select .Turn .MAC .Fi\btering .\fff , A\b\bow .MAC .addresses.
\bisted .be\bow , \br Deny .MAC .addresses .\bisted .be\bow 
fr\bm the dr\bp-d\bwn menu. 
Enter the MAC address y\bu w\buld like t\b filter.
T\b find the MAC address \bn a c\bmputer, please refer 
t\b the  Networking Basics  secti\bn in this manual. 
Select a DHCP client fr\bm the dr\bp-d\bwn menu and 
click