D-Link Router DHP-1565 User Manual

146
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
5.  Type a name to identify the network.
6.  To configure advanced settings, click the         icon.
Click Next to continue.  

147
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
7.  The following window appears while the Router is being configured.
 
  Wait for the configuration to complete.
8.  The following window informs you that WPS on the DHP-1565 has been setup 
successfully.
  Make a note of the security key as you may need to provide this security key 
if adding an older wireless device to the network in the future.
9.  Click Close to complete WPS setup.  

148
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Using Windows Vista®
Windows Vista®  users  may  use  the  built-in  wireless  utility.  If  you  are  using  another  company’s  utility  or Windows®  2000,  please  refer  to  the  user 
manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows 
Vista®
 utility as seen below.
Right-click on the wireless computer icon in your system...

149
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Configure Wireless Security
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you 
are joining an existing network, you will need to know the security key or passphrase being used.
2.	 Highlight the wireless network (SSID) you would like to connect to and click 
Connect.
1. Open the Windows Vista® Wireless Utility by right-clicking on the...

150
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
3.  Enter the same security key or passphrase that is on your router and click  Connect.
It may take 20-30 seconds to connect to the wireless network. If the connection fails, 
please  verify  that  the  security  settings  are  correct.  The  key  or  passphrase  must  be 
exactly the same as on the wireless router.  

151
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Using Windows® XP
Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users.  If you are 
using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless 
network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below....

152
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Configure WPA-PSK
It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing 
network, you will need to know the WPA key being used.
2.	 Highlight the wireless network (SSID) you would like to connect to and 
click Connect.
1. Open the Windows® XP Wireless Utility by right-clicking on the wireless 
computer icon in your system tray (lower-right...

153
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
3.  The  Wireless Network Connection  box will appear. Enter the WPA-PSK passphrase 
and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the connection fails, 
please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be 
exactly the same as on the wireless router.  

154
D-Link DHP-1565 User Manual
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DHP-1565.  Read the following descriptions 
if you are having problems. The examples below are illustrated in Windows
® XP.  If you have a different operating system, the screenshots on your 
computer will look similar to the following examples.
1. Why can’t I access the web-based configuration utility?
When entering the IP...

155
D-Link DHP-1565 User Manual
Section 6 - Troubleshooting
•  Configure your Internet settings:
•  Go to  Start >  Settings >  Control Panel. Double-click the  Internet Options Icon. From the  Security tab, click the button to restore 
the settings to their defaults.
•  Click the  Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing 
is checked. Click OK. 
•  Go to the Advanced tab and click the button to restore these settings to their...