D-Link Router DHP-1565 User Manual

136
D-Link DHP-1565 User Manual
Section 3 - Configuration
Support  

137
D-Link DHP-1565 User Manual
Section 4 - Security
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The 
DHP-1565 offers the following types of security:
• WPA2 (Wi-Fi Protected Access 2)       • WPA2-PSK (Pre-Shared Key)
• WPA (Wi-Fi Protected Access)      • WPA-PSK (Pre-Shared Key)
What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent...

138
D-Link DHP-1565 User Manual
Section 4 - Security
Configure WEP
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before 
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.  Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).  
2.  Click on Setup and then click Wireless Settings on the...

139
D-Link DHP-1565 User Manual
Section 4 - Security
Configure	 WPA/WPA2-Personal	(PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before 
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).  
2.  Click on Setup and then click Wireless...

140
D-Link DHP-1565 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before 
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.  Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).  
2.  Click on Setup and then click Wireless Settings on the left side.
3....

141
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Using Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you 
are joining an existing network, you will need to know the security key or passphrase being used.
1.  Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Connect to a Wireless...

142
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
3.  Highlight the wireless network (SSID) you would like to connect to and click 
the Connect button.
  If  you  get  a  good  signal  but  cannot  access  the  Internet,  check  your  TCP/IP 
settings  for  your  wireless  adapter.  Refer  to  the  Networking  Basics  section  in 
this manual for more information.
4. The following window appears while your computer tries to connect to the 
router.  

143
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
5.  Enter  the  same  security  key  or  passphrase  that  is  on  your  router  and  click 
Connect. You  can  also  connect  by  pushing  the  Common  Connect    Button 
on the router.
It may take 20-30 seconds to connect to the wireless network. If the connection 
fails, please verify that the security settings are correct. The key or passphrase 
must be exactly the same as on the wireless router.  

144
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
Configure WPS
The WPS feature of the router can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature 
of the router:
1.  Click the Start button and select Computer from the Start menu.
2.  Click the Network option.  

145
D-Link DHP-1565 User Manual
Section 5 - Connecting to a Wireless Network
3.  Double-click the DHP-1565.
4.  Input  the WPS  PIN  number  (displayed  in  the WPS  window  on  the  Router’s 
LCD screen or in the  Setup > Wireless Setup menu in the Router’s Web UI) 
and click Next.