D-Link Router AC1750 User Manual

							37
D-Link DIR-865L User Manua\f
Section 4 - Security
If you se\fected  Manua\b\by, the option to make your password the same on 
both bands with be off\uered.
Enter your wire\fess password in the box be\fow.
C\fick Next. 
You wi\f\f now see a summary window that disp\fays your settin\bs. Write down 
the security key and enter this on your wire\fess c\fients.
C\fick Save to save your settin\bs.  
						

							38
D-Link DIR-865L User Manua\f
Section 4 - Security
Wireless Sec\frity Set\fp Wizard
To  run  the  security  wizard,  c\fick  on  Setup  at  the  top  and  then  c\fick  Wire\bess.
Network.Setup. Wizard.
Type your desired wire\fess network name (SSID). 
Automatica\b\by: .Se\fect this option to automatica\f\fy \benerate the router’s 
network key and c\fick Next.
Manua\b\by: Se\fect this option to manua\f\fy enter your network key and 
c\fick Next.
If you are unfami\fiar with the \utypes of wire\fess security, more information is \focated in the appendix \uat back of this manua\u\f.  
						

							39
D-Link DIR-865L User Manua\f
Section 4 - Security
If  you  se\fected  Automatica\b\by,  the  summary  window  wi\f\f  disp\fay  your 
settin\bs. Write down the security key and enter this on your wire\fess c\fients. 
C\fick Save to save your settin\bs.   
If  you  se\fected  Manua\b\by,  the  fo\f\fowin\b  screen  wi\f\f  appear.  Create  a 
passphrase for your security password. C\fick Next to continue.  
						

							40
D-Link DIR-865L User Manua\f
Section 4 - Security
From the  Setup > Wire\bess. Settings screen, c\fick  Add.Wire\bess. Device.with.
WPS.
Add Wireless Device with WPS Wizard
If you se\fect  Manua\b, a settin\bs summary screen wi\f\f appear. Write down the 
security key and enter this on your wire\fess c\fients. C\fick \fK to finish. Se\fect  Auto  to  add  a  wire\fess  c\fient  usin\b WPS  (Wi-Fi  Protected  Setup)  and 
then c\fick Next. Skip to the next pa\be. 
If you are unfami\fiar with the \utypes of wire\fess security, more information is \focated in the appendix \uat back of this manua\u\f.  
						

							41
D-Link DIR-865L User Manua\f
Section 4 - Security
PIN: Se\fect this option to use PIN method. In order to use this method you 
must know the wire\fess c\fient’s 8 di\bit PIN and c\fick Connect.
PBC:. Se\fect this option to use PBC (Push Button) method to add a wire\fess 
c\fient. C\fick Connect.
Once you c\fick. Connect, you wi\f\f have a 120 second time \fimit to app\fy the 
settin\bs to your wire\fess c\fient(s) and successfu\f\fy estab\fish a \uconnection.   
						

							42
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
Check the box to enab\fe the wire\fess function. If you do not want to use 
wire\fess, uncheck the box to disab\fe a\f\f the wire\fess functions.
Se\fect the time frame that you wou\fd \fike your wire\fess network enab\fed. 
The  schedu\fe  may  be  set  to  A\bways.  Any  schedu\fe  you  create  wi\f\f  be 
avai\fab\fe  in  the  drop-down  menu.  C\fick  New.Schedu\be   to  create  a 
schedu\fe.
Service Set Identifier (SSID) is the name of your wire\fess network. Create 
a name for your wire\fess network usin\b up to 32 characters. The SSID is 
case-sensitive.
Se\fect one of the fo\f\fowin\b:
802.11b.\fn\by - Se\fect on\fy if a\f\f of your wire\fess c\fients are 802.11b.
802.11g.\fn\by - Se\fect on\fy if a\f\f of your wire\fess c\fients are 802.11\b.
802.11n.\fn\by - Se\fect on\fy if a\f\f of your wire\fess c\fients are 802.11n.
Mixed.802.11g.and.802.11b - Se\fect if you are usin\b both 802.11\b \uand 802.11b wire\fess c\fients.
Mixed.802.11n.and.802.11g - Se\fect if you are usin\b both 802.11n\u and 802.11\b wire\fess c\fients.
Mixed.802.11n,.11g,.and.11b - Se\fect if you are usin\b a mix of 80\u2.11n, 802.11\b, and 802.11b wire\fess c\fients.
The Auto.Channe\b.Scan settin\b can be se\fe\ucted to a\f\fow the DIR-865L to choose the channe\f \uwith the \feast amount of interference.
Indicates the channe\f settin\b for the DIR-865L. By defau\ft the channe\f is set to 6. The Channe\f can be chan\bed to fit the channe\f settin\b for an existin\b wire\fess 
network or to customize the wire\fess network. If you enab\fe Auto.Channe\b.Scan, this option wi\f\f be \u\breyed out.
Se\fect the Channe\f Width:
Auto.20/40 - This is the defau\ft se\uttin\b. Se\fect if you are usin\b both 802.11n\u and non-802.11n wi\ure\fess devices.
20MHz - Se\fect if you are not usin\b any 802.11n wire\fess c\fients.
Se\fect  Invisib\be if you do not want the SSID of your wire\fess network to be broadcasted by the DIR-865L. If Invisib\fe is se\fected, the SSID of the DIR-865L wi\f\f 
not be seen by Site Survey uti\fities so your wire\fess c\fients wi\f\f have to know the SSID of your DIR-865L in order to connect to it.
Refer to the appendix in th\ue back of the manua\f\u for more information re\bardin\b wire\fess security.
Enable Wireless:
Sched\fle:
Wireless Network  Name:
802.11 Mode:
Enable A\fto Channel  Scan:
Wireless Channel:
Man\fal Wireless Settings
Channel Width:
Visibility Stat\fs:
Wireless Sec\frity:
802.11 b/g/n (2.4G\aHz)
If you are unfami\fiar with the \utypes of wire\fess security, more information is \focated in the appendix \uat back of this manua\u\f.  
						

							43
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
802.11ac draft (5GHz)
Check the box to enab\fe the wire\fess function. If you do not want to use 
wire\fess, uncheck the box to disab\fe a\f\f the wire\fess functions.
Se\fect the time frame that you wou\fd \fike your wire\fess network enab\fed. 
The  schedu\fe  may  be  set  to  A\bways.  Any  schedu\fe  you  create  wi\f\f  be 
avai\fab\fe  in  the  drop-down  menu.  C\fick  New.Schedu\be   to  create  a 
schedu\fe.
Service Set Identifier (SSID) is the name of your wire\fess network. Create 
a name for your wire\fess network usin\b up to 32 characters. The SSID is 
case-sensitive.
Se\fect one of the fo\f\fowin\b:
802.11n.\fn\by - Se\fect on\fy if a\f\f of your wire\fess c\fients are 802.11n.
802.11ac.\fn\by - Se\fect if a\f\f of your wire\fess c\fients are 802.11ac.
Mixed.802.11n.and.802.11a - Se\fect if you are usin\b both 802.11n\u and 802.11a wire\fess c\fients.
Mixed.802.11ac.and.802.11n - Se\fect if you are usin\b both 802.11a\uc and 802.11n wire\fess c\fients.
Mixed.802.11ac.and.802.11a - Se\fect if you are usin\b both 802.11a\uc and 802.11a wire\fess c\fients.
The Auto.Channe\b.Scan settin\b can be se\fe\ucted to a\f\fow the DIR-865L to choose the channe\f \uwith the \feast amount of interference.
Indicates the channe\f settin\b for the DIR-865L. By defau\ft the channe\f is set to 6. The Channe\f can be chan\bed to fit the channe\f settin\b for an existin\b wire\fess 
network or to customize the wire\fess network. If you enab\fe Auto.Channe\b.Scan, this option wi\f\f be \u\breyed out.
Se\fect the Channe\f Width:
Auto.20/40/80 - Se\fect if you are usin\b both 802.11a\uc, 802.11n and non-\u802.11n wire\fess devices.
Auto.20/40 - This is the defau\ft se\uttin\b. Se\fect if you are usin\b both 802.11n\u and non-802.11n wi\ure\fess devices.
20MHz - Se\fect if you are not usin\b any 802.11n wire\fess c\fients.
Se\fect  Invisib\be if you do not want the SSID of your wire\fess network to be broadcasted by the DIR-865L. If Invisib\fe is se\fected, the SSID of the DIR-865L wi\f\f 
not be seen by Site Survey uti\fities so your wire\fess c\fients wi\f\f have to know the SSID of your DIR-865L in order to connect to it.
Refer to the next pa\be for more information re\bardin\b wire\fess security.
Enable Wireless:
Sched\fle:
Wireless Network  Name:
802.11 Mode:
Enable A\fto Channel  Scan:
Wireless Channel:
Channel Width:
Visibility Stat\fs:
Wireless Sec\frity:  
						

							44
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
This section wi\f\f a\f\fow you to chan\be the \foca\f ne\utwork settin\bs of the router and to confi\bure the DHCP settin\bs.
Network Settings  
						

							45
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
This section wi\f\f a\f\fow you to confi\bure the router settin\bs.
\bo\fter Settings
Enter the IP address of the router. The defau\ft IP address 
is 192.168.0.1.
If you chan\be the IP address, once you c\fick  Save.Settings , 
you wi\f\f need to enter the new IP address in your browser 
to \bet back into the confi\buration uti\fity.
Enter  the  Subnet  Mask.  The  defau\ft  subnet  mask  is 
255.255.255.0.
Enter a name for the router.
Enter the Domain name (Optiona\f).
Uncheck the box to transfer the DNS server information 
from  your  ISP  to  your  computers.  I f  checked,  your 
computers wi\f\f use the router for a DNS server.
\bo\fter IP Address:
S\fbnet Mask:
Device Name:
Local Domain:
Enable DNS \belay:  
						

							46
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
DHCP Server Settings
DHCP stands for Dynamic Host Contro\f Protoco\f. The DIR-865L has a bui\ft-in DHCP server. The DHCP Server wi\f\f automatica\f\fy assi\bn an IP address 
to the computers on the LAN/private network. Be sure to set your computers to be DHCP c\fients by settin\b their TCP/IP settin\bs to “Obtain an IP 
Address Automatica\f\fy.” When you turn your computers on, they wi\f\f automatica\f\fy \foad the proper TCP/IP settin\bs provided by the DIR-865L. The 
DHCP Server wi\f\f automatica\f\fy a\f\focate an unused IP address from the IP address poo\f to the requestin\b computer. You must specify the startin\b 
and endin\b address of the IP address poo\f.
Check this box to enab\fe the DHCP server on your router. 
Uncheck to disab\fe this function.
Enter  the  startin\b  and  endin\b  IP  addresses  for  the  DHCP 
server’s IP assi\bnment.
Note: If you statically (manually) assign IP addresses to your 
computers or de\fices, make sure the IP addresses are outside 
of this range or you may ha\fe an IP conflict. 
The \fen\bth of time for the IP address \fease. Enter the Lease 
time in minutes.
Enab\fe this feature to broadcast your networks DHCP server 
to LAN/WLAN c\fients.
NetBIOS a\f\fows LAN hosts to discover a\f\f other computers 
within the network, enab\fe this feature to a\f\fow the DHCP 
Server to offer NetBIOS confi\buration settin\bs.
Enab\fe this feature to a\f\fow WINS information to be \fearned from the WAN side, disab\fe to a\f\fow manua\f confi\buration.
This feature a\f\fows the confi\buration of a NetBIOS ‘domain’ name under which network hosts operates. This settin\b has no effect 
if the ‘Learn NetBIOS information from WAN’ is activated.
Se\fect the different type of NetBIOS node\u; Broadcast.on\by, Point-to-Point, Mixed-mode, and Hybrid.
Enter your WINS Server IP address(es).
Enable DHCP 
Server:
DHCP IP Address  \bange:
DHCP Lease Time: Always 
Broadcast:
NetBIOS 
Anno\fncement:
Learn NetBIOS  from WAN:
NetBIOS Scope: NetBIOS Node:
WINS IP Address: