D-Link Router AC1200 User Manual

							107
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
Time
Disp\fays the current date and time of the router.
Se\fect  your  Time  Zone  from  the  drop-down 
menu.
To  se\fect  Day\fi\bht  Savin\b  time  manua\f\fy,  se\fect 
enab\fed or disab\fed, and enter a start date and 
an end date for day\fi\bht savin\b time.
NTP  is  short  for  Network  Time  Protoco\f.  A  NTP 
server  wi\f\f  synch  the  time  and  date  with  your 
router. This wi\f\f on\fy connect to a server on the 
Internet,  not  a  \foca\f  server.  Check  the  box  to 
enab\fe this feature.
Enter the IP address of a NTP server or se\fect one 
from the drop-down menu.
To  manua\f\fy  input  the  time,  enter  the  va\fues 
in  these  fie\fds  for  the  Year,  Month,  Day,  Hour, 
Minute, and Second and then c\fick Set. Time. 
You can a\fso c\fick  Copy.Your.Computer’s. Time.
Settings   to  synch  the  date  and  time  with  the 
computer you are current\fy on.
Time:
Time Zone:
Enable Daylight  Saving:
Enable NTP Server:
NTP Server Used: Manual:
The Time Confi\buration option a\f\fows you to confi\bure, update, and maintain the correct time on the interna\f system c\fock. 
From this section you can set the time zone that you are in and set the Time Server. Day\fi\bht Savin\b can a\fso be confi\bured to 
automatica\f\fy adjust the tim\ue when needed.
DIR-850L  
						

							108
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
SysLog
The  Broadband  Router  keeps  a  runnin\b  \fo\b  of  events  and  activities  occurrin\b  on  the  Router. You  may  send  these  \fo\bs  to  a 
SysLo\b server on your network.
Enable Logging to 
SysLog Server:
SysLog Server IP  Address: Check this box to send the router \fo\bs to a SysLo\b 
Server.
The  address  of  the  SysLo\b  server  that  wi\f\f  be 
used  to  send  the  \fo\bs. You  may  a\fso  se\fect  your 
computer  from  the  drop-down  menu  (on\fy  if 
receivin\b an IP address from the router via DHCP).
DIR-850L  
						

							109
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
Email Settings
The Emai\f feature can be used to send the system \fo\b fi\fes, router a\fert messa\bes, and firmware update notification to your 
emai\f address. 
Enable Email 
Notification: 
From Email Address:
To Email Address:
SMTP Server Address: SMTP Server Port:
Enable Authentication: Account Name:Password:
On Log Full:
On Schedule: Schedule: When  this  option  is  enab\fed,  router  activity  \fo\bs  are  emai\fed  to  a 
desi\bnated emai\f address.
This emai\f address wi\f\f appear as the sender when you receive a \fo\b 
fi\fe or firmware up\brade notification via emai\f.
Enter the emai\f address where you want the emai\f sent. 
Enter the SMTP server address for sendin\b emai\f. 
Enter the SMTP port used on the server.
Check this box if your SMTP server requires authentication. 
Enter your account for sendin\b emai\f.
Enter  the  password  associated  with  the  account.  Re -type  the 
password associated with the account.
When  this  option  is  se\fected,  \fo\bs  wi\f\f  be  sent  via  emai\f  to  your 
account when the \fo\b is fu\f\f.
Se\fectin\b  this  option  wi\f\f  send  the  \fo\bs  via  emai\f  accordin\b  to 
schedu\fe.
This option is enab\fed when 
\fn.Schedu\be  is se\fected. You can se\fect 
a schedu\fe from the \fist of defined schedu\fes. To create a schedu\fe, 
\bo to Too\bs.>.Schedu\bes.
DIR-850L  
						

							110
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
Use  this  option  to  save  the  current  router 
confi\buration settin\bs to a fi\fe on the hard disk of 
the  computer  you  are  usin\b.  First,  c\fick  the  Save 
button.  A  fi\fe  dia\fo\b  wi\f\f  appear,  a\f\fowin\b  you  to 
se\fect a \focation and fi\fe name for the settin\bs. 
Use  this  option  to  \foad  previous\fy  saved  router 
confi\buration settin\bs. First, use the  Browse option 
to  find  a  previous\fy  saved  fi\fe  of  confi\buration 
settin\bs.  Then,  c\fick  the  Load  button  to  transfer 
those settin\bs to the router. 
This  option  wi\f\f  restore  a\f\f  confi\buration  settin\bs 
back  to  the  settin\bs  that  were  in  effect  at  the 
time  the  router  was  shipped  from  the  factory. 
Any  settin\bs  that  have  not  been  saved  wi\f\f  be 
\fost,  inc\fudin\b  any  ru\fes  that  you  have  created.  If 
you want to save the current router confi\buration 
settin\bs, use the  Save button above. 
C\fick to reboot the router.
Save Settings to 
Local Hard Drive:
Load Settings 
from Local Hard  Drive:
Restore to 
Factory Default  Settings:
Reboot Device:
System
This section a\f\fows you to mana\be the router’s confi\buration settin\bs, reboot the router, and restore the router to the factory 
defau\ft settin\bs. Restorin\b the unit to the factory defau\ft settin\bs wi\f\f erase a\f\f settin\bs, inc\fudin\b any ru\fes that you’ve created.
DIR-850L  
						

							111
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
Firmware
\browse:
Upload: After  you  have  down\foaded  the  new  firmware,  c\fick 
Browse  to  \focate  the  firmware  update  on  your  hard 
drive. C\fick 
Up\boad to comp\fete the firmware up\brade.
Once you have a firmware update on your computer, 
use this option to browse for the fi\fe and then up\foad 
the information into the access point. 
You can up\brade the firmware of the access point here. Make sure the firmware you want to use is on the \foca\f hard drive of 
the computer. C\fick on  Browse to \focate the firmware fi\fe to be used for the update. P\fease check the D-Link support website 
for firmware updates at http://support.d\bink.com. You can down\foad firmware up\brades to your hard drive from this site.
After you have down\foaded the new \fan\bua\be pack, 
c\fick  Browse to \focate the \fan\bua\be pack fi\fe on your 
hard  drive.  C\fick  Up\boad  to  comp\fete  the  \fan\bua\be 
pack up\brade.
Language Pack
You can chan\be the \fan\bua\be of the web UI by up\foadin\b 
avai\fab\fe \fan\bua\be pack\us.
\browse:
DIR-850L  
						

							112
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
Dynamic  Domain  Name  System  is  a  method  of 
keepin\b a domain name \finked to a chan\bin\b IP 
Address. Check the box to enab\fe DDNS.
Se\fect your DDNS provider from the drop-down 
menu or enter the DDNS server address.
Enter  the  Host  Name  that  you  re\bistered  with 
your DDNS service provider.
Enter  the  User name  or  key  for  your  DDNS 
account.
Enter the Password or key for your DDNS account.
Enter a timeout time (i\un hours).
Disp\fays the current connection status.
Enable 
Dynamic DNS:
Server 
Address:
Host Name:
Username or  Key:
Password or  Key:
Timeout: Status:
Dynamic DNS
The DDNS feature a\f\fows you to host a server (Web, FTP, Game Server, etc…) usin\b a domain name that you have purchased 
(www.whateveryournameis.com) with your dynamica\f\fy assi\bned IP address. Most broadband Internet Service Providers assi\bn 
dynamic (chan\bin\b) IP addresses. Usin\b a DDNS service provider, your friends can enter in your domain name to connect to 
your server no matter what your IP address is.
DIR-850L  
						

							113
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
The  Pin\b  Test  is  used  to  send  Pin\b  packets  to  test  if  a 
computer  is  on  the  Internet.  Enter  the  IP  address  that  you 
wish to Pin\b and c\fick Ping.
Enter the IPv6 address that you wish to Pin\b and c\fick  Ping.
The resu\fts of your pin\b attempts wi\f\f be disp\fayed here.
System \fheck
Ping Test:
IPv6 Ping Test: Ping Results:
DIR-850L  
						

							114
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
Enter a name for your new schedu\fe.
Se\fect a day, a ran\be of days, or A\f\f Week to inc\fude 
every day.
Check  A\b\b.Day. -.24hrs  or  enter  a  start  and  end 
time for your schedu\fe.
You must c\fick  Save.Settings at the top for your 
schedu\fes to \bo into effect.
The \fist of schedu\fes wi\f\f be \fisted here. C\fick the 
Edit  icon to make chan\bes or c\fick the  De\bete icon 
to remove the schedu\fe.
Name:
Days:
Time:
Save:
Schedule Rules  List:
Schedules
Schedu\fes can be created for use with enforcin\b ru\fes. For examp\fe, if you want to restrict web access to Mon-Fri from 3pm to 
8pm, you cou\fd create a schedu\fe se\fectin\b Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End\u Time of 8pm. 
DIR-850L  
						

							115
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
This pa\be disp\fays the current information for the DIR-850L. It wi\f\f disp\fay the LAN, WAN (Internet), and Wire\fess information. 
If your Internet connection is set up for a Dynamic IP address then a  Re\bease button and a Renew button wi\f\f be disp\fayed. 
Use Re\bease to disconnect from your ISP and use Renew to connect to your ISP. 
If your Internet connection is set up for PPPoE, a  Connect button and a Disconnect button wi\f\f be disp\fayed. Use  Disconnect 
to drop the PPPoE connection and use Connect to estab\fish the PPPoE connection.
Disp\fays the router’s time and firmware version.
Disp\fays the MAC address and the pub\fic I\uP settin\bs 
Disp\fays the MAC address and the private (\foca\f) IP settin\bs\u for the router.
Disp\fays  the  2.4GHz  wire\fess  MAC  address  and  your  wire\fess  settin\bs  such  as 
SSID and Channe\f. 
Disp\fays the 5GHz wire\fess MAC address and your wire\fess settin\bs such as SSID 
and Channe\f. 
Disp\fays computers and devices that are connected to the router via Ethernet 
and that are receivin\b an IP address assi\bned by the router (DHCP). 
General:
WAN:LAN:
Wireless LAN1:
Wireless LAN2:
LAN \fomputers:
Device Info
Status
DIR-850L  
						

							116
D-Link DIR-850L User Manua\f
Section 3 - Confi\buration
Logs
Log Options:
Refresh:
First Page: Last Page: Previous: Next:
\flear:
Email Now:
Save Log: You  can  se\fect  the  types  of  messa\bes  that  you  want 
to  disp\fay  from  the  \fo\b.  System  Ac tivit y,  D ebu\b 
Information,  Attacks,  Dropped  Packets,  and  Notice 
messa\bes  can  be  se\fected.  C\fick 
App\by.Log.Settings.
Now to activate your settin\bs.
Updates the \fo\b detai\fs on the screen so it disp\fays any 
recent activity.
C\fick to \bo to the first pa\be.
C\fick to \bo to the \fast pa\be.
C\fick to \bo back one pa\be.
C\fick to \bo to the next pa\be.
C\fears a\f\f of the \fo\b \ucontents.
This  option  wi\f\f  send  a  copy  of  the  router  \fo\b  to  your 
emai\f address confi\bured in the  Too\bs > Emai\b .Settings.
screen.
This  option  wi\f\f  save  the  router  \fo\b  to  a  fi\fe  on  your 
computer.
The router automatica\f\fy \fo\bs (records) events of possib\fe interest in it’s interna\f memory. If there isn’t enou\bh interna\f memory 
for a\f\f events, \fo\bs of o\fder events are de\feted but \fo\bs of the \fatest events are retained. The Lo\bs option a\f\fows you to view 
the router \fo\bs. You can define what types of events you want to view and the \feve\f of the events to view. This router a\fso has 
externa\f Sys\fo\b Server support so you can send the \fo\b fi\u\fes to a computer on your network that is runnin\b a Sys\fo\b uti\fity.
DIR-850L