Compaq Presario1600.series User Manual
Have a look at the manual Compaq Presario1600.series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 65 Compaq manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack IMPORTANT: Compaq uses two vendors for CD drives and the CD drive cables are unique for each. If the replacement CD drive is the same as the original CD drive, it is not necessary to replace the CD drive cable. If the replacement CD drive is different from the original CD drive, the CD drive cable must be replaced with the cable supplied with the replacement CD drive. Disconnecting the CD Drive Cable from the CD Drive 11. Disconnect the CD cable from the CD drive and push forward from the rear to remove the CD drive from the chassis as shown. To replace the CD drive, reverse the previous procedures. Back to Preparing the Computer for Disassembly. privacy statement legal notices
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Removing The Display Assembly Removing the Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Status Panel Interface Board Hard Drive Battery Charger Board CD Drive Display Assembly Plastic Subpanel Assembly CD Drive Cable Speaker Assembly Modem Diskette Drive Fan Audio Assembly Board System Board Memory Module Removing the Hinge Covers1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad 3. Remove the keyboard. 4. Remove the heatspreader. 5. Remove the status panel. 6. Remove the interface board. 7. Disconnect the ZIF connector and backlight power cable from the interface board. 8. Grasp the hinge covers and push out to release the covers from the hinges of the display panel assembly as shown. Next privacy statement legal notices
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Removing Screws from the Display Assembly9. Support the back of the display assembly and remove the four screws from the display assembly as shown. Next privacy statement legal notices
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Removing the Display Assembly with Flex Cable Attached10. Gently pull the flex cable attached to the display assembly through the slot on the plastic subpanel assembly. 11. Remove the display assembly with flex cable attached as shown. Back to Preparing the Computer for Disassembly. privacy statement legal notices
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Removing The Plastic Subpanel Assembly Removing the Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Status Panel Interface Board Hard Drive Battery Charger Board CD Drive Display Assembly Plastic Subpanel Assembly CD Drive Cable Speaker Assembly Modem Diskette Drive Fan Audio Assembly Board System Board Memory Module Removing the Screws from the Plastic Subpanel Assembly1. Prepare the computer for disassembly. 2. Remove the screw of the plastic subpanel assembly from the bottom of the computer located near the battery pack . 3. Remove the palmrest cover with touch pad. 4. Remove the keyboard. 5. Remove the heatspreader. 6. Remove the display assembly with flex cable attached. 7. Remove three screws located at the top, two screws located in the right corner, and release the snap located in the left corner of the plastic subpanel assembly as shown. Next privacy statement legal notices
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Releasing the Plastic Subpanel Assembly 8. Rotate the plastic subpanel assembly off the snap as shown. Next privacy statement legal notices
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Removing the Plastic Subpanel Assembly from the Chassis9. Remove the plastic subpanel assembly from the chassis and disconnect the power switch cable from the system board as shown. Back to Preparing the Computer for Disassembly. privacy statement legal notices
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Removing The CD Drive Cable Removing the Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Status Panel Interface Board Hard Drive Battery Charger Board CD Drive Display Assembly Plastic Subpanel Assembly CD Drive Cable Speaker Assembly Modem Diskette Drive Fan Audio Assembly Board System Board Memory Module Disconnecting the CD Drive Cable from the System Board1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Remove the keyboard. 4. Remove the heatspreader. 5. Remove the hard drives. 6. Remove the stiffener bracket. 7. Remove the status panel. 8. Remove the interface board. 9. Remove the display assembly. 10. Remove the plastic subpanel assembly. 11. Remove the CD drive 12. Disconnect the CD drive cable from the system board. Back to Preparing the Computer for Disassembly privacy statement legal notices
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Removing The Speaker Assembly Removing the Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Status Panel Interface Board Hard Drive Battery Charger Board CD Drive Display Assembly Plastic Subpanel Assembly CD Drive Cable Speaker Assembly Modem Diskette Drive Fan Audio Assembly Board System Board Memory Module Removing the Screws from the CD Guide Support Bracket1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Remove the keyboard. 4. Remove the heatspreader 5. Remove the hard drives 6. Remove the stiffener bracket 7. Remove the CD drive and hard drive cable shield 8. Remove the four screws from the CD Guide support bracket and remove the CD Guide support bracket and PCMCIA shield as shown. Next NOTE:When replacing the CD Guide support bracket, ensure the PCMCIA shield is properly replaced. privacy statement legal notices
United States January 2, 2003 Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Disconnecting the Speaker Cables and Removing the Speaker Assembly9. Disconnect the speaker cables from the system board and lift the speaker assembly from the chassis. Back to Preparing the Computer for Disassembly NOTE: The speaker cables must be properly routed when replacing the CD drive. For more information on cable routing refer to speaker cable routing. privacy statement legal notices