Compaq Presario1600.series User Manual

							United States     January 2, 2003 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Removing The Interface Board
Removing 
the Battery 
Pack
Palmrest 
Cover with 
Touch Pad
Keyboard
Heatspreader
Status Panel
Interface 
Board
Hard Drive
Battery 
Charger
Board
CD Drive
Display 
Assembly
Plastic 
Subpanel 
Assembly
CD Drive 
Cable
Speaker 
Assembly
Modem
Diskette 
Drive
Fan
Audio 
Assembly 
Board
System 
Board
Memory 
Module
Removing the Screws from the Interface Board1. 
Prepare 
the 
computer for 
disassembly.
2. 
Remove 
the palmrest 
cover with 
touch pad.
3. 
Remove 
the 
keyboard.
4. 
Remove 
the status 
panel.
5. Remove 
the two 
screws from 
the interface 
board as 
shown.
Next
 
 
 
privacy statement
legal notices 
						

							United States     January 2, 2003 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Disconnecting the ZIF Connector and Backlight Power Cable 
from the Interface Board 6. Slightly 
lift the 
interface 
board, 
disconnect 
the ZIF 
connector, 
and 
backlight 
power cable 
from the 
interface 
board as 
shown.
Next
 
 
 
privacy statement
legal notices 
						

							United States     January 2, 2003 
 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
IMPORTANT:
When removing the interface board with the header attached occasionally \
the 
header will remain attached to the system board. If this occurs when rem\
oving the 
interface board with the header attached, separate the header from the c\
onnector 
on the system board.
 
NOTE:When replacing interface board ensure both connectors on the board are p\
roperly 
seated. 
Removing the Interface Board with Header Attached 7. Lift the interface board up with the header 
attached from the system board as shown.
To replace the interface board, reverse the 
previous procedures.
An illustration of locations of connectors on 
the interface board.
Back to Preparing the Computer for 
Disassembly
 
 
 
privacy statement
legal notices 
						

							United States     January 2, 2003 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Interface Board
This page shows an Illustration and table of the locations of the connec\
tors on the 
interface board.
Interface Board Components
Interface Board Components Designator Connector
1. JP1 Backlight Switch
2. JP3 Display Interface 
ZIF
3. JP4 Inverter/Backlight 
LIF Connector
4.None Interface Header
Back to Preparing the Computer for Disassembly
 
 
 
privacy statement
legal notices 
						

							United States     January 2, 2003 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Removing The Hard Drive
Removing 
the Battery 
Pack
Palmrest 
Cover with 
Touch Pad
Keyboard
Heatspreader
Status Panel
Interface 
Board
Hard Drive
Battery 
Charger
Board
CD Drive
Display 
Assembly
Plastic 
Subpanel 
Assembly
CD Drive 
Cable
Speaker 
Assembly
Modem
Diskette 
Drive
Fan
Audio 
Assembly 
Board
System 
Board
Memory 
Module
Removing the 3.2-GB or 4.0-GB Hard Drive with 
Mounting Bracket Attached1. 
Prepare 
the 
computer for 
disassembly.
2. 
Remove 
the palmrest 
cover with 
touch pad.
3. Remove 
four screws 
from the 
hard drive 
mounting 
bracket and 
lift the hard 
drive with 
hard drive 
mounting 
bracket 
attached out 
of the 
chassis as 
shown.
Next
 
 
 
privacy statement
legal notices 
						

							United States     January 2, 2003 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Disconnecting the Hard Drive Data Cable from the Hard Drive4. Disconnect 
the hard drive 
data cable from 
the hard drive 
as shown.
To replace the 
hard drive, 
reverse the 
previous 
procedures.
Back to 
Preparing the 
Computer for 
Disassembly.
 
 
 
privacy statement
legal notices 
						

							United States     January 2, 2003 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Removing The Battery Charger Board
Removing 
the Battery 
Pack
Palmrest 
Cover with 
Touch Pad
Keyboard
Heatspreader
Status Panel
Interface 
Board
Hard Drive
Battery 
Charger
Board
CD Drive
Display 
Assembly
Plastic 
Subpanel 
Assembly
CD Drive 
Cable
Speaker 
Assembly
Modem
Diskette 
Drive
Fan
Audio 
Assembly 
Board
System 
Board
Memory 
Module
Removing the Screws and the Battery Charger 
Board1. 
Prepare 
the 
computer for 
disassembly.
2. 
Remove 
the palmrest 
cover with 
touch pad.
3. 
Remove 
the 
keyboard.
4. 
Remove 
the hard 
drives
5. 
Remove 
the stiffener 
bracket.
6. Remove 
the two 
screws from 
the battery 
charger 
board, 
unplug the 
board from 
the system 
board, and 
lift out of 
the chassis 
as shown.
Back to 
Preparing 
the 
Computer 
for 
Disassembly
NOTE:When replacing the battery charger board, ensure the pins are 
aligned with the connector on the system board.
 
 
 
privacy statement
legal notices 
						

							United States     January 2, 2003 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Removing The CD Drive
Removing 
the Battery 
Pack
Palmrest 
Cover with 
Touch Pad
Keyboard
Heatspreader
Status Panel
Interface 
Board
Hard Drive
Battery 
Charger
Board
CD Drive
Display 
Assembly
Plastic 
Subpanel 
Assembly
CD Drive 
Cable
Speaker 
Assembly
Modem
Diskette 
Drive
Fan
Audio 
Assembly 
Board
System 
Board
Memory 
Module
Removing the Screws from the CD Drive1.
 Prepare 
the 
computer 
for 
disassembly
2.
 Remove 
the 
palmrest 
cover with 
touch pad.
3. 
Remove 
the 
keyboard.
4. 
Remove 
the hard 
drives.
5. 
Remove 
the stiffener 
bracket. 
6.
 Remove 
the battery 
charger 
board.
7. Remove 
the screw 
securing 
the PCMCIA 
shield.
8. Remove 
two screws 
located at 
the back CD 
drive and 
remove the 
hard drive 
cable shield 
as shown.
Next
 
 
 
privacy statement
legal notices 
						

							United States     January 2, 2003 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Opening the CD Drive Tray 9. Open the CD drive 
tray using a small paper 
clip as shown.
Next
 
 
 
privacy statement
legal notices 
						

							United States     January 2, 2003 
 
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Releasing the Lever10. Release the lever 
on the CD drive tray 
and gently push 
forward from the rear of 
the CD drive to access 
the CD drive cable as 
shown.
Next
 
 
 
privacy statement
legal notices