compaq lte elite User Manual

Failure 2. Replace the systemboard.
--------------------------------------------------------------------------- 
1150 - COM Port Two ports are Run Computer Setup. 
Configuration configured in the 
Error same address. 
--------------------------------------------------------------------------- 
1151 - COM Port 2 Short Both external and Run Computer Setup. 
1 Address internal serial 
Assignment ports are assigned
Conflict to COM1. 
---------------------------------------------------------------------------...

----------------------------------------------
Defective system If the drive in the 
board in expansion expansion base is 
base. designated as secondary, replace the system
board in the expansion 
base.
----------------------------------------------
Defective system If the drive in the
board in computer. computer is designated
as secondary, replace
the system board in the 
computer.
--------------------------------------------------------------------------- 
1793 - Secondary None Refer to probable Refer...

The Configuration and Diagnostics menu is displayed.
4. Select Computer Checkup (TEST) from the Configuration and Diagnostics
menu.
The Computer Checkup options menu is displayed.
5. Select View Device List.
A list of the installed hardware devices is displayed.
NOTE: Computer Checkup may not detect non-Compaq devices.
6. Verify that Computer Checkup correctly detected the installed devices.
If the list is correct, select OK. The Computer Checkup option menu is
displayed again.
If the list is incorrect,...

12. Rerun POST and Computer Checkup, completing the recommended actions in
the order given until the problem is solved and no error messages
occur.
Computer Checkup (TEST) Error Codes
Computer Checkup (TEST) error codes occur if the system recognizes a
problem while running Computer Checkup. These error codes help identify
possible defective assemblies. Tables 2-2 through 2-13 list Computer
Checkup error codes, a description of the error condition, and the
recommended action for resolving the condition....

failed.
---------------------------------------------------------------------------
112 - xx Speed test slow mode Replace the system board.
out of range.
---------------------------------------------------------------------------
113 - 01 Protected mode test Replace the system board.
failed.
---------------------------------------------------------------------------
114 - 01 Speaker test failed. 1. Check system configuration to
verify that speaker is enabled.
2. Check speaker volume level on
popup...

8042 self-test failed. If disconnected, turn off the
computer and connect the
keyboard.
2. Replace the keyboard.
3. Replace the system board.
---------------------------------------------------------------------------
302 - xx Keyboard long test 1. Check the keyboard connection.
failed. If disconnected, turn off the
computer and connect the
keyboard.
2. Replace the keyboard.
3. Replace the system board.
---------------------------------------------------------------------------
303 - xx Keyboard LED...

604 - xx Diskette random seek
test failed.
605 - xx Diskette ID media
failed.
606 - xx Diskette speed test
failed.
607 - xx Diskette wrap test
failed.
608 - xx Diskette write protect
test failed.
609 - xx Diskette reset
controller test
failed.
610 - xx Diskette change line
test failed.
697 - xx Diskette type error.
698 - xx Diskette drive speed
not within limits.
---------------------------------------------------------------------------
699 - xx Diskette drive/media 1. Replace media.
ID error. 2. Run...

Table 2-9. Hard Drive Computer Checkup Error Codes
===========================================================================
Error Code Description Recommended Action
===========================================================================
1700 - xx Hard ID drive types The following steps apply to
test failed. 1700 - xx through 1799 - xx error
codes:
1701 - xx Hard drive format
test failed. 1. Run Computer Setup and verify
drive type.
1702 - xx Hard drive read test 2. Reseat the hard drive.
failed....

Table 2-10. Tape Drive Computer Checkup Error Codes
===========================================================================
Error Code Description Recommended Action
===========================================================================
1900 - xx Tape ID failed. The following steps apply to
1900 - xx through 1906 - xx error
1901 - xx Tape servo write codes:
failed.
1. Replace the tape cartridge.
1902 - xx Tape format failed. 2. Check the switch settings on
the adapter board.
1903 - xx Tape drive...

test failed.
2416 - xx Video noise pattern
test failed.
2417 - xx Light pen text mode
test failed, no
response.
2418 - xx ECG/VGC memory test
failed.
2419 - xx ECG/VGC ROM checksum
test failed.
2421 - xx ECG/VGC 640 x 200
graphics mode test
failed.
===========================================================================
Error Code Description Recommended Action
===========================================================================
2422 - xx ECG/VGC 640 x 350 16 The following step applies to
color...