compaq evo n115 User Manual
Have a look at the manual compaq evo n115 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 65 Compaq manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Remova l and Replacement Procedures Maintenance and Ser vice Guide 5–13 6. Spread the memory expansion slot retaining tabs to release the memory expansion board 1. The board tilts up at a 45-degree angle (Figure 5-10). 7. Remove the board by pulling it away from the connector at a 45-degree angle 2. Figure 5-10. Remo ving a Memory Expansion Boar d Reverse the above procedure to install a memory expansion board. 5.6 Mini PCI Communications Board Mini PCI Communication Boards Spare Part Number Information Mini PCI communication boards 56-KBPS domestic modem 56-KBPS international modem 248776-001 248777-002 263816m1.book Page 13 Friday, January 25, 2002 2:14 PM
5–14Maintenance and Service Guide Remo va l and Replacement Procedures 1. Prepare the computer for disassembly (Section 5.3). 2. Turn the computer bottom side up with the front facing forward. 3. Remove the black PM2.0 × 5.0 screw 1 that secures the mini PCI communications slot cover to the base enclosure (Figure 5-11). 4. Swing the left side of the cover up and to the right until it rests at an angle 2. 5. Lift the cover straight up and remove it 3. ✎The mini PCI communications slot cover is included in the Plastics and Hardware Kit (spare part number 254121-001). Figure 5-11. Remo ving the Mini PCI Comm unications Slot Cover 263816m1.book Page 14 Friday, January 25, 2002 2:14 PM
Remova l and Replacement Procedures Maintenance and Ser vice Guide 5–15 6. Spread the retaining tabs to release the mini PCI communications board 1. The board tilts up at a 45-degree angle (Figure 5-12). 7. Remove the board by pulling it away from the connector at a 45-degree angle 2. Figure 5-12. Remo ving a Mini PCI Comm unications Board Reverse the above procedure to install a mini PCI communications board. 263816m1.book Page 15 Friday, January 25, 2002 2:14 PM
5–16Maintenance and Service Guide Remo va l and Replacement Procedures 5.7 Optical Drive 1. Prepare the computer for disassembly (Section 5.3). 2. Turn the computer bottom side up with the front facing forward. 3. Remove the two pewter TM2.0 × 7.5 screws that secure the optical drive to the base enclosure (Figure 5-13). Figure 5-13. Remo ving the Optical Drive Scre ws Optical Drives Spare Part Number Information Optical drives 24X Max CD-ROM drive 8X Max CD-RW drive 8X Max DVD-ROM drive 8X Max DVD-ROM/CD-RW combination drive 254110-001 254111-001 254112-001 254113-001 and 264298-001 263816m1.book Page 16 Friday, January 25, 2002 2:14 PM
Remova l and Replacement Procedures Maintenance and Ser vice Guide 5–17 4. Turn the computer top side up with the front facing forward. 5. Insert a paper clip or similar thin metal rod into the manual release hole on the front bezel of the optical drive 1 (Figure 5-14). Press firmly. 6. Grasp the drive bezel and slide the drive out of the optical drive bay 2. Figure 5-14. Remo ving the Optical Drive Reverse the above procedure to install the optical drive. 263816m1.book Page 17 Friday, January 25, 2002 2:14 PM
5–18Maintenance and Service Guide Remo va l and Replacement Procedures 5.8 LED Cover 1. Prepare the computer for disassembly (Section 5.3). 2. Turn the computer bottom side up with the rear panel facing forward. 3. Remove the two pewter TM2.0 × 7.5 screws that secure the LED cover to the base enclosure (Figure 5-15). Figure 5-15. Remo ving the LED Cover Screws 4. Turn the computer top side up with front facing forward. 5. Open the computer as far as it will open. LED Cover Spare Part Number Information LED cover 254117-001 263816m1.book Page 18 Friday, January 25, 2002 2:14 PM
Remova l and Replacement Procedures Maintenance and Ser vice Guide 5–19 6. Press the Esc and F1 keys to reveal the slot in the LED cover 1 (Figure 5-16). 7. Insert a flat-bladed tool into the slot in the LED cover and lift the left side of the LED cover up 2. 8. Lift the LED cover up from left to right 3. Figure 5-16. Remo ving the LED Cover 9. Remove the LED cover. Reverse the above procedure to install the LED cover. 263816m1.book Page 19 Friday, January 25, 2002 2:14 PM
5–20Maintenance and Service Guide Remo va l and Replacement Procedures 5.9 Keyboard 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the LED cover (Section 5.8). Keyboards Spare Part Number Information Keyboards Belgian Brazilian Danish Dutch French Canadian French German Italian Japanese Latin American Spanish 254114-181 254114-201 254114-081 254114-331 254114-121 254114-051 254114-041 254114-061 254114-191 254114-162 Norwegian Pol is h Portuguese Spanish Swedish Swiss Taiwanese Thai U.K. English U.S. English 254114-091 254114-241 254114-131 254114-072 254114-101 254114-111 254114-AB1 254114-281 254114-031 254114-001 263816m1.book Page 20 Friday, January 25, 2002 2:14 PM
Remova l and Replacement Procedures Maintenance and Ser vice Guide 5–21 3. Swing the back edge of the keyboard up and forward 1 and rest it upside down on the palm rest 2 (Figure 5-17). Figure 5-17. Releasing the K eyboar d 263816m1.book Page 21 Friday, January 25, 2002 2:14 PM
5–22Maintenance and Service Guide Remo va l and Replacement Procedures 4. Release the ZIF connector 1 to which the keyboard cable is connected and disconnect the keyboard cable 2 (Figure 5-18). Figure 5-18. Disconnecting the K eyboar d Cab le 5. Remove the keyboard. Reverse the above procedure to install the keyboard. 5.10 Display Displays Spare Part Number Information Displays 14.1-inch, XGA, CTFT 13.3-inch, XGA, CTFT 254108-001 254107-001 263816m1.book Page 22 Friday, January 25, 2002 2:14 PM