compaq evo n115 User Manual

							Screw Listing
Maintenance and Ser vice Guide C–3
Figure C-2. Phillips M2.5 × 3.5 Screw Locations
Ta b l e  C - 2
Phillips M2.5 × 3.5 Screw
Color Qty Length Thread Head 
Width
black 4 3.5 mm 2.5 mm 5.0 mm
Where used:
Four screws that secure the hard drive to the hard drive bracket
(documented in Section 5.3, step 5a)
263816m1.book  Page 3  Friday, January 25, 2002  2:14 PM 
						

							C–4Maintenance and Service Guide
Scre w Listing
Figure C-3. Phillips M2.0 × 5.0 Scre w Locations
Ta b l e  C - 3
Phillips M2.0 × 5.0 Screw
Color Qty Length Thread Head 
Width
black 2 5.0 mm 2.0 mm 4.5 mm
Where used:
1  One screw that secures the memory expansion compartment cover to the 
base enclosure (documented in Section 5.4, step 3)
2  One screw that secures the mini PCI compartment cover to the top cover 
(documented in Section 5.6, step 3)
263816m1.book  Page 4  Friday, January 25, 2002  2:14 PM 
						

							Screw Listing
Maintenance and Ser vice Guide C–5
Figure C-4. Torx M2.0 × 7.5 Scre w Locations
Ta b l e  C - 4
Torx M2.0 × 7.5 Screw
Color Qty Length Thread Head 
Width
pewter 12 7.5 mm 2.0 mm 4.5 mm
Where used:
1  Two screws that secure the LED cover to the base enclosure
(documented in Section 5.7, step 3)
2  Two screws that secure the optical drive to the base enclosure
(documented in Section 5.9, step 5)
3  Six screws that secure the top cover to the base enclosure
(documented in Section 5.14, step 3)
263816m1.book  Page 5  Friday, January 25, 2002  2:14 PM 
						

							C–6Maintenance and Service Guide
Scre w Listing
Figure C-5. T orx M2.0 × 7.5 Scre w Locations (Contin ued)
Ta b l e  C - 4
Torx M2.0 × 7.5 Screw (Continued)
Color Qty Length Thread Head 
Width
pewter 12 7.5 mm 2.0 mm 4.5 mm
Where used:
1  One screw that secures the display ground cables to the base enclosure 
(documented in Section 5.10, step 9)
2  One screw that secures the top cover to the base enclosure
(documented in Section 5.14, step 7)
263816m1.book  Page 6  Friday, January 25, 2002  2:14 PM 
						

							Screw Listing
Maintenance and Ser vice Guide C–7
Figure C-6. Torx M2.0 × 5.0 Scre w Locations
Ta b l e  C - 5
Torx M2.0 × 5.0 Screw
Color Qty Length Thread Head 
Width
silver 27 5.0 mm 2.0 mm 4.5 mm
Where used:
1  Two screws that secure the display hinge covers to the base enclosure 
(documented in Section 5.10, step 4)
2  Three screws that secure the heat spreader to the base enclosure 
(documented in Section 5.11, step 2)
3  Two screws that secure the top cover to the base enclosure
(documented in Section 5.14, step 7)
263816m1.book  Page 7  Friday, January 25, 2002  2:14 PM 
						

							C–8Maintenance and Service Guide
Scre w Listing
Figure C-7. T orx M2.0 × 5.0 Scre w Locations (Contin ued)
Ta b l e  C - 5
Torx M2.0 × 5.0 Screw (Continued)
Color Qty Length Thread Head 
Width
silver 27 5.0 mm 2.0 mm 4.5 mm
Where used:
Three screws that secure the top cover to the base enclosure in the battery bay
(documented in Section 5.14, step 4)
263816m1.book  Page 8  Friday, January 25, 2002  2:14 PM 
						

							Screw Listing
Maintenance and Ser vice Guide C–9
Figure C-8. Torx M2.0 × 5.0 Scre w Locations (Contin ued)
Ta b l e  C - 5
Torx M2.0 × 5.0 Screw (Continued)
Color Qty Length Thread Head 
Width
silver 27 5.0 mm 2.0 mm 4.5 mm
Where used:
1  One screw that secures the diskette drive to the base enclosure 
(documented in Section 5.15, step 3)
2  One screw that secures the charger board to the base enclosure 
(documented in Section 5.16, step 2)
263816m1.book  Page 9  Friday, January 25, 2002  2:14 PM 
						

							C–10Maintenance and Service Guide
Scre w Listing
Figure C-9. T orx M2.0 × 5.0 Scre w Locations (Contin ued)
Ta b l e  C - 5
Torx M2.0 × 5.0 Screw (Continued)
Color Qty Length Thread Head 
Width
silver 27 5.0 mm 2.0 mm 4.5 mm
Where used:
Three screws that secure the left side panel to the base enclosure
(documented in Section 5.17, steps 2a and 2b)
263816m1.book  Page 10  Friday, January 25, 2002  2:14 PM 
						

							Screw Listing
Maintenance and Ser vice Guide C–11
Figure C-10. Torx M2.0 × 5.0 Scre w Locations (Contin ued)
Ta b l e  C - 5
Torx M2.0 × 5.0 Screw (Contin ued)
Color Qty Length Thread Head 
Width
silver 27 5.0 mm 2.0 mm 4.5 mm
Where used:
Three screws that secure the right side panel to the base enclosure 
(documented in Section 5.18, step 2)
263816m1.book  Page 11  Friday, January 25, 2002  2:14 PM 
						

							C–12Maintenance and Service Guide
Scre w Listing
Figure C-11. T orx M2.0 × 5.0 Scre w Locations (Contin ued)
Ta b l e  C - 5
Torx M2.0 × 5.0 Screw (Contin ued)
Color Qty Length Thread Head 
Width
silver 27 5.0 mm 2.0 mm 4.5 mm
Where used:
1  Two screws that secure the audio board to the base enclosure
(documented in Section 5.20, step 3)
2  Two screws that secure the fan to the base enclosure
(documented in Section 5.21, step 3)
263816m1.book  Page 12  Friday, January 25, 2002  2:14 PM