compaq evo n115 User Manual

Remova l and Replacement Procedures
Maintenance and Ser vice Guide 5–13
6. Spread the memory expansion slot retaining tabs to release 
the memory expansion board 
1. The board tilts up at a 
45-degree angle (Figure 5-10).
7. Remove the board by pulling it away from the connector at a  45-degree angle 
2.
Figure 5-10. Remo ving a Memory Expansion Boar d
Reverse the above procedure to install a memory 
expansion board.
5.6 Mini PCI Communications Board
Mini PCI Communication Boards
Spare Part Number...

5–14Maintenance and Service Guide
Remo va l and Replacement Procedures
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the front facing 
forward.
3. Remove the black PM2.0 × 5.0 screw 
1 that secures the mini 
PCI communications slot cover to the base enclosure 
(Figure 5-11).
4. Swing the left side of the cover up and to the right until it  rests at an angle 
2.
5. Lift the cover straight up and remove it 
3.
✎The mini PCI communications slot cover is...

Remova l and Replacement Procedures
Maintenance and Ser vice Guide 5–15
6. Spread the retaining tabs to release the mini PCI 
communications board 
1. The board tilts up at a 45-degree 
angle (Figure 5-12).
7. Remove the board by pulling it away from the connector at a  45-degree angle 
2.
Figure 5-12. Remo ving a Mini PCI Comm unications Board
Reverse the above procedure to install a mini PCI 
communications board.
263816m1.book  Page 15  Friday, January 25, 2002  2:14 PM 

5–16Maintenance and Service Guide
Remo va l and Replacement Procedures
5.7 Optical Drive
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the front facing 
forward.
3. Remove the two pewter TM2.0 × 7.5 screws that secure the  optical drive to the base enclosure (Figure 5-13).
Figure 5-13. Remo ving the Optical Drive Scre ws
Optical Drives
Spare Part Number Information
Optical drives
24X Max CD-ROM drive
8X Max CD-RW drive
8X Max DVD-ROM drive
8X Max...

Remova l and Replacement Procedures
Maintenance and Ser vice Guide 5–17
4. Turn the computer top side up with the front facing forward.
5. Insert a paper clip or similar thin metal rod into the manual 
release hole on the front bezel of the optical drive 
1 
(Figure 5-14). Press firmly.
6. Grasp the drive bezel and slide the drive out of the optical  drive bay 
2.
Figure 5-14. Remo ving the Optical Drive
Reverse the above procedure to install the optical drive.
263816m1.book  Page 17  Friday, January 25,...

5–18Maintenance and Service Guide
Remo va l and Replacement Procedures
5.8 LED Cover
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing 
forward.
3. Remove the two pewter TM2.0 × 7.5 screws that secure the  LED cover to the base enclosure (Figure 5-15).
Figure 5-15. Remo ving the LED Cover Screws
4. Turn the computer top side up with front facing forward.
5. Open the computer as far as it will open.
LED Cover
Spare Part Number...

Remova l and Replacement Procedures
Maintenance and Ser vice Guide 5–19
6. Press the Esc and F1 keys to reveal the slot in the LED 
cover
1 (Figure 5-16).
7. Insert a flat-bladed tool into the slot in the LED cover and lift  the left side of the LED cover up 
2.
8. Lift the LED cover up from left to right 
3.
Figure 5-16. Remo ving the LED Cover
9. Remove the LED cover.
Reverse the above procedure to install the LED cover.
263816m1.book  Page 19  Friday, January 25, 2002  2:14 PM 

5–20Maintenance and Service Guide
Remo va l and Replacement Procedures
5.9 Keyboard
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the LED cover (Section 5.8).
Keyboards
Spare Part Number Information
Keyboards
Belgian
Brazilian
Danish
Dutch
French Canadian
French
German
Italian
Japanese
Latin American Spanish 254114-181
254114-201
254114-081
254114-331
254114-121
254114-051
254114-041
254114-061
254114-191
254114-162
Norwegian
Pol is h
Portuguese
Spanish
Swedish
Swiss
Taiwanese
Thai...

Remova l and Replacement Procedures
Maintenance and Ser vice Guide 5–21
3. Swing the back edge of the keyboard up and forward 1 and 
rest it upside down on the palm rest 
2 (Figure 5-17).
Figure 5-17. Releasing the K eyboar d
263816m1.book  Page 21  Friday, January 25, 2002  2:14 PM 

5–22Maintenance and Service Guide
Remo va l and Replacement Procedures
4. Release the ZIF connector 1 to which the keyboard cable is 
connected and disconnect the keyboard cable 
2 
(Figure 5-18).
Figure 5-18. Disconnecting the K eyboar d Cab le
5. Remove the keyboard.
Reverse the above procedure to install the keyboard.
5.10 Display
Displays
Spare Part Number Information
Displays
14.1-inch, XGA, CTFT
13.3-inch, XGA, CTFT 254108-001
254107-001
263816m1.book  Page 22  Friday, January 25, 2002  2:14 PM