Home > Comdial > Communications System > Comdial Impact Dsu Instructions Manual

Comdial Impact Dsu Instructions Manual

Here you can view all the pages of manual Comdial Impact Dsu Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 411

Unscreened Call Transfer
A user can transfer a call to another station without first announcing it. The transferred
call will camp-on to the other station where it will ring and await an answer. The call will
automatically ring back to the transferring station after a programmable recall period.
There is no limit as to how many calls users can camp-on to another station. A
transferred call will only ring if the station is idle. If the station is busy, the call will wait
until it is idle before it rings....

Page 412

Voice Announce Blocking
This feature allows station users to block voice announced intercom signaling by dialing
a code or pressing a programmable button programmed for that purpose. The
programmable button used to block voice signaling is enabled by station class of service
programming.
SeeIntercom.
Voice Mail Support
The digital telephone system supports the use of voice processing equipment connected
to the system’s station ports through the ATI-D analog terminal interface. The ATI-D is
a...

Page 413

Positive Disconnect Supervision
When a station is on line with an outside caller and the caller hangs up, the CO may send
a positive disconnect signal to the digital telephone system. The system passes this signal
to the voice mail equipment thus signaling it also to hang up.
Voice Mail Line ID
The programmer can program the voice mail lines with identification (ID) numbers that
allow the voice mail equipment to identify which line it is answering. The ID numbers
that the programmer assigns here must...

Page 414

ringer-off feature on a system-wide basis. When programmers take this option, users can
set the ringer volume to a low level but cannot completely silence it.
The number of handset loudness levels is different for the different telephone models.
The DigiTech telephones have 8 handset volume settings. At default,Impacttelephones
have 8 handset volume settings, but the installer may increase the number of volume
settings on individual stations to 13. Users working in noisy environments and users with...

Page 415

INDEX
A
Abandoned Hold Release.....3-38, A-1
AC Power Connection...........2-8
Access Codes For
Direct Department Calling.......3-95
Access Denied...........3-48, A-1
Accessories, Installing..........2-54
Accessory Information..........1-5
Account Code Button.......3-80, A-4
Account Code
Configurations, Recording.....4-20–21
Account Code Length..........3-89
Account Code List...........3-89
Disabled Account Codes . . . . . . . . . 3-90
Enabled Account Codes . . . . . . . . . . 3-90
Forced or Optional...

Page 416

Audible Ringing Interface.......2-30
Authorizing Repairs..........2-80
Automatic Call-Back Button.....3-81
Automatic Callback.......... A-5
Automatic Dialing........... A-6
Automatic Hold............3-52
Automatic Hold For Intercom..... A-7
Automatic Hold—Transfer To Line . . A-7
Automatic Pause Insertion...... A-7
Automatic Privacy........3-38, 3-53
Automatic Redial........... A-7
Automatic Station Relocation . . 3-17, A-8
Automatic Transfer of Voice Mail . . 3-110
Auxiliary Equipment Interface . 2-29,...

Page 417

Caller ID...............A-15–16
Caller ID Parameter
Switches, Setting............2-74
Caller ID Service Support.......3-165
Assigning A “SAVE” Button
(optional programming) . . . . . . . . . 3-170
Assigning Caller ID Lines
(required programming) . . . . . . . . . 3-168
Assigning Caller ID Stations
(required programming) . . . . . . . . . 3-168
Configuration Chart . . . . . . . . . . . . 4-2
Configuring RS232 Data Port B
(required programming) . . . . . . . . . 3-169
Setting The Audible First Ring...

Page 418

D
Data Baud Rate............3-18
Data Connections,
Common Equipment.........2-36
Data Connections,
Modular Jack.............2-34
Data Devices, Connecting.......2-34
Data Interface Unit....3-163, A-20–21
Creating Data Security Groups . . . . . 3-164
Programming Data Buttons . . . . . . . 3-163
Records . . . . . . . . . . . . . . . . . . 4-48
Remote Data Station . . . . . . . . . . . 3-164
Data Interface Unit, Installing.....2-68
Data Printer Service.........3-105
Enable Data Printer Operation . . . . ....

Page 419

Direct Ringing..............3-59
Direct Station
Call Hold (Station Park)........A-30
Direct Station
Selection (DSS) Programmable.....A-30
Disable A Station............3-74
Disable A Line.............3-37
Disable Call Waiting Tone.......3-104
Discard Digits.............3-129
Display of Costed Calls........3-131
Distinctive Ringing........3-95, A-30
DIU ....................1-6
DND Button...............3-83
Do Not Disturb.............A-30
Do Not Disturb Inhibit.........A-31
Do Not Disturb...

Page 420

Flash/Recall..............3-34
Flexible Ringing
Assignments...........3-59, A-33
Direct/Delayed Ringing . . . . . . . . . . 3-59
Night Transfer (Of Ringing)—
Line/Station Assignments . . . . . . . . . 3-60
Night Transfer (Of Ringing)—Operation . 3-60
Delayed Ringing Times . . . . . . . . . . 3-61
Allow Ringer Off . . . . . . . . . . . . . 3-61
Flexible Ringing
Assignments Of PA Port.......A-34
Flexible Station And
Line Class Of Service Control....A-34
Flexible Station Numbering......3-62
Flexible Station...
Start reading Comdial Impact Dsu Instructions Manual

Related Manuals for Comdial Impact Dsu Instructions Manual

All Comdial manuals