Comdial Executech 2232 HYBRID/KEY SYSTEM Instructions Manual

							* ._ .IMI 66-047Publication Index
A-LEAD CONTROL DEVICE CONNECTIONS............................
2-5
AC POWER CONNECTION..........................................2-3
AREA PAGING INTERFACE - LINE PORT............................2-7
AREA PAGING INTERFACE - STATION PA P~KT......................~- 7
BASE LEVEL PROGRAM ENTRY MODE................................
CASSETTE TAPE RECORD OF COS VALUES..........................
3%
CASSETTE TAPE RECORDER INTERFACE.............................2-8
CHECK OUT...................................................2-17
CLASS OF SERVlCE DEFAULT.....................................3-3
COMMON AUDIBLE AND AUXILIARY STATION INTERFACE...............2- 6
COMPATIBILITY WITH TELEPHONE NETWORK.........................;-;
CONNECTION, AC POWER
-.........................................
CONNECTIONS,A-LEAD CONTROL DEVICE...........................2-5
CONNECTIONS, DATA DEVICE.....................................2-5
CONNECTIONS,DSS/BLF CONSOLE.................................2-4
CONNECTIONS, LINE............................................2-3
CONNECTIONS,POWER FAILURE STATIONS..........................2-4
CONNECTIONS,STATION AUXILIARY JACK..........................2-4
CONNECTIONS, STATION.........................................2-3
CONVERSION,DESK/VJALL OF STATIONS............................4-5
COS PRINTOUT................................................3-20
DATA DEVICE CONNECTIONS......................................2-5
DEFAULT,CLASS OF SERVICE....................................3-3
DEFAULTS, LIIJE..............................................3-12
DEFAULTS, STATION...........................................3-14
DEEAULTS, SYSTEM
.............................................3-5
DESK/WALL REVERSAL AND WALL MOUNTING, OF STATIONS............4- 5
DSS/BLF CONSOLE CONNECTIONS..................................2-4
DSS/BLF CONSOLE SELF TEST....................................4-3
DUAL REGISTRATION NOTIFICATION...............................1-2
FAILURE ANALYSIS.............................................4-5
FAILURE ISOLATION............................................4-2
FCC RULES AND REGULATIONS....................................1-2
FUSE LOCATION................................................4-1
GENERAL CHECK...............................................2-18
GENERAL INFORMATION, PROGRAMMING.............................3-l
INITIAL CONDITION...........................................2-17
INSTALLATION REQUIREMENTS....................................1-3
INSrALLATION.................................................l-5
INTRODUCTION.................................................l- 1
-continued
l-l 
						

							IMI 66-047
*
Publication Index
Publication Index 
- continued
KEY 
SYSTEM/MUTIFUNCTION STRAPPING............................2-8
LINE CONNECTIONS.............................................2-3
LINE COS PROGRAMMING REFERENCE TABLE........................3-13
LINE COS PROGRAMMING........................................
3-12
LINE DEFAULTS...............................................3-12.
LIST OF ILLUSTRATIONS..........................................V
LIST OF TABLES
.................................................
LOADING COS DATA FROM TAPE..................................
3-2;
MAINTENANCE
..................................................4-l
MANUAL SCOPE.................................................l-l
MOUNTING CONSIDERATIONS......................................2-1
MOUNTING PROCEDURE...........................................2-l
MULTIFUNCTION/KEY SYSTEM STRAPPING...........................2-8
MUSIC INTERFACE
..............................................2-8
NOTIFICATION TO TELEPHONE COMPANY............................l-2
PAIRED STATIONS
..............................................4-4
PARTY LINES AND COIN LINES
...................................l-3
POUER FAILURE STATION CONNECTIONS............................2-4
PRINTOUT, COS AND SMDR DATA.................................3-20
PROCEDURE,LINE COS PROGRAMMING.............................3-12
PROCEDURE,SYSTEM COS PROGRAMMING
............................3-5
PROGAMMING OVERLAYS..........................................3-3
PROGRAMMING PROCEDURE, SYSTEM COS............................3-5
PROGRAMMING, LINE COS.......................................3-12
PROGRAMMING, STATION COS
....................................3-14
PROGRAMMING,SYSTEM SPEED DIAL..............................3-25
PROGRAMMING, SYSTEM..........................................3-l
PROGRAMMING, TOLL RESTRICTION................................3-9
RADIO FREQUENCY INTERFERENCE.................................1-3
RECORDING COS DATA TO TAPE..................................3-22
RELATED INFORMATION
..........................................l-l
REPAIR AUTHORIZATION.........................................l-3
REPAIR SERVICE...............................................4-1
REPLACEMENT PARTS LIST.......................................4-7
RESISTANCE CHECK
............................................2-17
RINGER EQUIVALENCE NUMBER....................................l-4
l-2 
						

							w ’i IMI 66-047Publication Index
Publication Index 
- continued
SELF TEST, DSS/BLF CONSOLE
...................................
4-3
SELF TEST, STATION...........................................4-3
SMDR PRINTOUT
...............................................3-20
SPECIAL PROGRAMMING REQUIREMENTS FOR SINGLE-LINE KEYSETS.....3- 1
STATION AUXILIARY JACK CONNECTIONS
...........................
2-4
STATION CONNECTIONS..........................................2-3
STATION COS PROGRAMMING REFERENCE TABLE.....................3-19
STATION COS PROGRAMMING.....................................
3-14
STATION DEFAULTS............................................3-14
STATION PAIRING..............................................4-4
STATION SELF TEST
............................................4-3
STATION TYPES................................................1-2
STRAPPING KEY SYSTEM/MUTIFUNCTION-............................
SYSTEM CHECKOUT.............................................
22,
SYSTEM CLOCK INFORMATION
....................................3-24
SYSTEM COS PROGRAMMING PROCEDURE.............................3-5
SYSTEM COS PROGRAMMING REFERENCE TABLE.......................3- 5
SYSTEM DEFAULTS..............................................
3-5
SYSTEM GROUNDING
.............................................2-6
SYSTEM PROGRAMMING...........................................3-1
SYSTEM SPEED DIAL PROGRAMMING
...............................3-25
SYSTEM STATUS INDICATORS.....................................4-3
SYSTEM WIRING
................................................2-3
TABLE ENTRY PROCEDURE, TOLL RESTRICTION......................3- 7
TABLE OF CONTENTS.............................................l v
TECHNICAL ASSISTANCE AND REPAIR SERVICE......................4- 1
TECHNICAL ASSISTANCE
.........................................
4-1
TOLL RESTRICTION PROGRAMMING PROCEDURE......................3-10
TOLL RESTRICTION 
FROGRAMMING REFERENCE TABLES...............3-10
TOLL RESTRICTION PROGRAMMING.................................
3-7
TROUBLESHOOTING..............................................l-3
VOLTAGE CHECK...............................................2-18
WALL MOUNTING, OF STATIONS
...................................4-5
-end
i-3 
						

							READERS COMMENT FORM
Publication No.Issue No.Addendum
TitleHow did you use this publication?
0 Product familiarization
Cl Installation
OtherCl Training0 Maintenance
Please check specific criticism(s), give page number(s), and explain below:
0 Clarification on page(s)Cl Error on page(s)
0 Addition on page(s)0 Deletion on page(s)
I
Thank you for your cooperation. If a reply is required, please check: 0Name
Your Function
Company
Address
City, StateDate
Zip 
						

							Ploj--------------------
1
INO POSTAGEINECESSARYIIF MAILEDI
IIN THE
IUNITED STATESI
I
I
I
I
I
I
I
I
I
I
BUSINESS REPLY MAIL
FIRST CLASS MAIL PERMIT NO.594
CHARLOITESVILLE, VA 22906
POSTAGE WILL BE PAID BY ADDRESSEE
COMDIALTECHNICAL PUBLICATIONS DEPARTMENT
P 0 BOX 7266
CHARLOTTESVILLE VA 22906-7266
I,,l,l,,l,ll,l,,ll,,,l,,,l,ll,1ll,,,l,l,,ll,,,,l,l,l
I
I
I
f
I
f
t
I
I
I
I
_-- ------ ------------------------------------_--FoldiI
I
I
Please Tape - Do Not Staple 
						

							LIMITED WARRANTY
Comdial Corporation (Comdial) warrants that under normal operating conditions, this Equipment (except for fuses, *lamps, and other
consumables will be free from defects in material and workmanship for a period of twenty-four (24) months from the manufacturing date
stamped on
tieEquipment. Comdial’s sole obligation under this warranty or under any other legal obligation with respect to the Equipment is
to rerefurL?ir or replace, at its option, the Equipment if it is deemed defective by Comdial during the warranty period free of charge with new orrshed equipment or parts, at Corndial’s option, when the Equipment is returned to Comdial, freight or postage prepaid, during the
warranty period. This warranty does not apply if, in the sole judgement of Comdial, the Equipment has been installed or used in combination
or in assembly with products not supplied by Comdial and 
whrch are not compatible or inferior quality, design or performance, or the Equipment
has been otherwise misused, abused, accidentally damaged, or damaged or malfunctions or fails to function as a result of acts of God such as
fire, flood, or lightning or other incidence of excessive or 
insufficent voltage or failure to follow instructions. Repair or alteration of this
Equipment other than as specifically authorized ‘by Comdial or its authorized repair agent is prohibited and will void this warranty. This
warrantv does not cover costs associated with installation. removal. or reinstallabon of the Eouioment. Comdial does not warrant that theEqui- m&is compatible with all telephone or switching systems. ‘THIS WARRANTY IS EX’CLUSIVE, BEING IN LIEU OF ALL OTHER
WAFpRANTIES,EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. WITHOUT EXPANDING UPON THE FOREGOING WARRANTY, THE MAXIMUM LIABILITY OF
COMDIAL UNDER ANY WARRANTY, STATUTORY, EXPRESS OR IMPLIED, IS LIMITED TO THE PURCHASE PRICE OF THE
EQUIPMENT. COMDIAL SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO PROPERTY OR ANY OTHER LOSS OR INJURY,
INCLUDING 
CONSEQUENTlALANDlOR INCIDENTAL DAMAGES, RESULTING FROM THE POSSESSION, OPERATION OR USE OF THE
EQUIPMENT. ALL SUCH CLAIMS BEING HEREBY EXPRESSLY WAIVED. THE PURCHASER’S EXCLUSIVE WARRANTY AND REMEDY
SHALL BE ONLY AS STATED HEREIN.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states do not allow
limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations
may not apply to you.If the Magnuson-Moss Act should be held to apply to the sale of the Equipment by a court of competent jurisdiction, the implied warranty of
fitness for a particular purpose shall extend for one year from the date of manufacture.
No Comdial dealer nor any other person or entity other than Comdial may extend or modify this warranty, and no such modification or
extension shall be effective unless it is in writing.
This manual has been developed by 
Corndial Corporation (the ‘Compan “) and is intended for the use of its customers and service personnel.
The information in this manual is subject to change without notice.Ah.rleevery effort has been made to eliminate errors, the Companydisclaims liability for any difficulties arising for the interpretation of the information contained herein.The information contained herein does not 
pruport to cover all details or variations in equipment nor to provide for every possible contingency
to be met in connection with installation, operation, or maintenance. Should further information be desired, or should partrcular problems anse
which are not covered sufficiently for the purchaser’s purposes, contact, Comdial, Customer” Service Department, P.O. BOX 7266,
Charlottesville, Virginia 22906. 
						

							COMDIAL
Charlottesville, Va. 22901
PRINTED IN U.S.A.
716604-700.01