Comdial Dxp Plus Instructions Manual

Typical Multiline
Digital Telephone
( Model
8012S Illustrated)Impact
To KSU
Station Port
To
Common
Equipment
Cabinet
dsu04.cdr
Station Port
Connection
Making The DIU Cable Connections
Explaining The Software 12A Features GCA40–200
Describing The 12A Features – 9 

Dial By Name
The Dial By Name feature allows users to employ any two-line display, LCD speakerphone and its
interactive buttons to search through an index of names, locate a desired station name or system speed
dial name, and automatically call the located item.
By pressing the option button, users enter the dial by name menu. From that menu, they either press the
INTbutton for intercom calling or theEXTbutton for system speed dial calling, and then dial three digits
for the first three letters of the...

Using Dial By Name
To use dial by name,
·PressOPTIONto enter the dial by name menu.
·PressINTbutton for intercom calling or pressEXTfor speed dial calling.
·Dial up to seven digits for the corresponding letters of the name that you want to locate
(for example, dial 266 for Comdial).
·1 = QZ 2 = ABC 3 = DEF
4 = GHI 5 = JKL 6 = MNO
7 = PRS 8 = TUV 9 = WXY
Remember, reporogramming allows 7 to represent PQRS and 9 to represent WXYZ with 1 no
longer representing any letters.
The displays shows the first...

Impact Telephone New Model Support
Digital communication systems support a group of newly designedImpacttelephone models. The model
numbers of these telephones are listed below.
8324S — 24 Line Half-Duplex LCD Speakerphone
8324F — 24 Line Full-Duplex LCD Speakerphone
8312S — 12 Line Half-Duplex LCD Speakerphone
8212S — 12 Line Half-Duplex Speakerphone 8212N — Multiline Proprietary Telephone
8201N — Single Line Proprietary Telephone IB48X — 48-Button DSS/BLF Console
IB24X — 24-Button DSS/BLF Console IMIST...

Illustrating The New Impact Telephone Models
The following illustrations show the outline and dimensional views of the newImpacttelephones
IB48XIB24X 8212S
2ABC13DEF6MNO5JKL4GHI7PRS8TUV9WXY# 0 *
SPEAKERMESSAGE
TRNS/CONF
HOLDMUTETAP
COMDIAL
8212N
TAP
MUTE
HOLD TRNS/CONF INTERCOM
MESSAGE
*0#WXY9TUV8PRS7GHI4JKL5MNO6DEF3 1ABC2COMDIAL
8201N
TAP
MUTE
HOLD TRNS/CONF INTERCOM
MESSAGE
*0#WXY9TUV8PRS7GHI4JKL5MNO6DEF3 1ABC2COMDIAL
2ABC13DEF6MNO5JKL4GHI7PRS8TUV9WXY# 0 *COMDIAL
SHIFT
MUTE SPEAKERTRNS/CONF
HOLDTAP...

8212S,
8212N,
8201N,
and IB24X
8324F,
8312S, 8324S,
and IB48X
9.0656.315
8.819
8.819
4.442
3.283
1.550
image_2.cdr
Viewing The New Impact Telephone Dimensions
GCA40–200 Explaining The Software 12A Features
14 – Describing The 12A Features 

ISDN Features
With the release of software revision 12A, several enhancing features become available for the
ISDN–PRI interface. This interface provides integrated voice and data communications over a common
telephone company facility to Comdial proprietary telephone systems.
Calling Party Number Type, Called Party Number Type
This feature adds a programming choice that defines the number configuration that the system recognizes
for both incoming (called party) and outgoing (calling party) calls over an...

Station Blocking
Installers can group stations together into blocks, and then arrange those station block groups so that the
stations that they have programmed into one system station block group cannot make intercom calls to
stations that they have programmed into a different station block group. Station block groups prevent both
personal intercom dialing and direct station selection(DSS) as well as voice announce, call forwarding,
and screened transfers; however, the feature does allow calls to group...

Programming The 12A Features
Upgrading The DXP Plus Software
The DXPPlusdigital communications system includes system software when it ships from the factory.
At initial system installation, you do not need to load the system software to make the system operational.
Should you need to later reload the system software (for software up-grade purposes for example), you
can do so using the supplied system software disk. Use Windows File Manager or MS–DOS commands
to save the disk’s information from your...

DXP, DXP Plus, and Impact FX
Digital Communications Systems
General Description for the
Common Code Base Software
Feature Set 15A, Release 170
Printed in U.S.A.GCA40–219.01
04/99
The information in this publication is applicable for software feature set 15A, Release 170.
R
ISO 9001 Certified