Comdial Dxp Plus Instructions Manual

4.1.3 E & M Tie Line Type
(Complete one record sheet for each line. Copy this blank sheet as needed to provide a record for each line in the
system.)
Line Port__________________________________
Dialing Code(if applicable)___________________
Name_____________________________________
Feature Setting* Default
Disabled Yes NoNo
Music Or Tone On Hold Tone Source 1 Source 2 NoneSource 1
Ringback On Transfer Yes NoNo
Privacy Release Yes NoNo
SMDR Record Yes NoYes
Cost Incoming Yes NoNo
Incoming Cost DelayNo...

4.1.4 DID Line Types
(Complete one record sheet for each line. Copy this blank sheet as needed to provide a record for each line in the
system.)
Line Port__________________________________DID/DNIS Block____________________
Dialing Code(if applicable)___________________
Name_____________________________________
Feature Setting* Default
Disabled Yes NoNo
Music Or Tone On Hold Tone Source 1 Source 2 NoneSource 1
Ringback On Transfer Yes NoNo
Privacy Release Yes NoNo
SMDR Record Yes NoYes
Cost Incoming Yes...

4.1.5 E & M DNIS Line Types
(Complete one record sheet for each line. Copy this blank sheet as needed to provide a record for each line
in the system.)
Line Port__________________________________DID/DNIS Block__________________________
Dialing Code(if applicable)___________________
Name_____________________________________
Feature Setting* Default
Disabled Yes NoNo
Music Or Tone On Hold Tone Source 1 Source 2 NoneSource 1
Ringback On Transfer Yes NoNo
Privacy Release Yes NoNo
SMDR Record Yes NoYes
Cost...

4.2 Line Group Programming
Group Group Name Lines Assigned ARS Access
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Default: Group 1 = lines 9–16, Group 2 = lines 17–21, Group 3 = lines 25–32, Groups 4–16 = no lines assigned
4.3 Block Programming Record For Lines
Model Line Matching Lines
DXP Plus Programming Records IMI66–125
Line Records 4–7 

4.4 System Line Record
Bd. Type*PortNumberNameGrp.12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364
*Enter either DXPCO-LP4 or DXPCO-LP8 for board type
Bd. Type*PortNumberNameGrp.6566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128
IMI66–125 DXP Plus Programming Records
4–8  Line Records 

System Line Record—continued
Bd. Type*PortNumberNameGrp.129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192
DXP Plus Programming Records IMI66–125
Line Records 4–9 

4.5 DID/DNIS Block Programming
4.5.1 DID/DNIS Options
Feature Choice Default
Option Block Number (1–8)—
Block Name (7 char. max.)—
Control Signalling Wink Start Immediate Start Delay Start Wink
Expected CO Digits 0–77
Dialing Mode Tone Pulse Tone
ANI Delivery Yes No No
DISA Voice Options 1–41
Alternate Routing—Extension 0, nnnn—
Alternate Routing—Ring Code 1–81
CFOS Enable Yes NoNo
Information Digits Yes NoNo
* Mark each block to match your desired setting.
Feature Choice Default
Option Block Number...

4.5.2 DID/DINS Translation Table
(Complete one record sheet for each DID block. Copy this blank sheet as needed to provide a record for every CO digit sequence.)
DID Block_______________
CO Digits Name Day Itcm. Number Night Itcm. Number Ring Code*
*Default: ring code = 1 for all intercom numbers
DXP Plus Programming Records IMI66–125
Line Records  4–11 

4.6 DISA Configuration Programming
Use the table below for recording DISA configuration parameters.
Feature Setting Default
Day Routing Extension
Night Routing Extension
Voice Mail Routing ID
Lockout Time: 2, 5, 10, 15, or 30 minutes.
10 minutes
RNA Timeout: 0 through 9 rings (see note below table).3 rings
Maximum Reminder Timeout: 2, 5, 10, 15, or 30 minutes.10 minutes
Route/Drop Invalid AccessDrop
NOTE: The RNA timeout (number of rings with no answer) you select here must be less than the RNA rings...

Intercom Numbers
·From the main menu, type selection number for intercom numbers and pressENTER.
·From the intercom numbers menu, type selection number for feature and pressENTER.
Intercoms
1. Modify Intercoms
2. Add Intercoms
3. Remove Intercoms
4. Station Intercom Renumber
Enter Selection (1-4):
5
DXP Plus Programming Records IMI66–125
Intercom Records 5–1