Comdial Digital Telephone System Industry-Standard Telephone Instructions Manual

Using All-Call And Zone Paging 
l To make a paging announcement in one or all zones, 
1. lift handset and listen for intercom dial tone, 
2. dial zone number (84,85,86, or 87 for all-call), 
3. make announcement, 
4. hang up handset or wait on line for an answer (known as a 
“meet-me” page). 
Using Meet-Me Page 
l To answer a page, 
1. lift handset and listen for intercom dial tone, 
2. dial 88, 
3. meet paging party on line for private conversation. 
/ST Station User’s Guide - 11  

Station User’s Guide GCA 70-239 
Call Forwarding 
You can designate any system station to be the recipient of just the intercom 
calls and prime line calls that are directed to your station or the recipient of all 
the calls that are directed to your station. 
l To forward intercom calls and prime line to another telephone, 
1. lift handset and listen for intercom dial tone, 
2. dial % 05, 
3. dial extension number of telephone to which calls are to be 
forwarded. 
l To cancel intercom call and prime...

GCA7&239 Station User’s Guide 
Using Automatic Call-back 
l To arrange for the system to call back when a busy telephone 
becomes idle, 
1. make intercom call and hear busy signal, 
2. dial% 6, 
3. hang up. Your station will ring when called telephone 
becomes idle. 
l To answer call-back ring, 
lift handset. Called telephone will ring. 
l To cancel automatic call back before it rings, 
1. lift handset and listen for intercom dial tone, 
2. dial # 6, 
3. hang up. 
Call Waiting 
You can save call-waiting...

Station User’s Guide GCA 70-239 
l To answer a call waiting tone that sounds at your station, 
1. hear three short tone bursts over existing conversation, 
2. finish present call or place it on hold by pressing and releasing 
hookswitch (flash), or by pressingTAP button if available, 
3. hang up (waiting call will begin ringing), 
4. lift handset to answer, 
5. hang up when call is completed. Return to previous call, if 
on hold, by pressing and releasing hookswitch (flash), or 
pressing TAP button if...

IST Station User’s Guide - 15  

This manual has been developed by Comdial 
Corporation (the “Company”) and is intended 
for the use of its customers and service 
personnel. The information in this manual is 
subject to change without notice. While every 
effort has been made to eliminate errors, the 
Company disclaims liability for any 
difficulties arising from the interpretation of 
the information contained herein. 
The information contained herein does not 
purport to cover all details or variations in 
equipment or to provide for...