Home
>
Comdial
>
Communications System
>
Comdial Digital Telephone System Industry-Standard Telephone Instructions Manual
Comdial Digital Telephone System Industry-Standard Telephone Instructions Manual
Here you can view all the pages of manual Comdial Digital Telephone System Industry-Standard Telephone Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 1
COMDIAL Digital Telephone System Industry-Standard Telephone User’s Guide (Interfaced through the ATI-D)
Page 2
This user’s guide applies to Industry Standard Single Line Telephones, such as the Comdial 2500-xx (when used on Comdial Gxxxx common equipment with Ixxxx software cartridge Rev. 15 A and later and connected through the Analog Terminal Interface-ATI-D). If you need more information, consult your System User’s Guide
Page 3
GCA70-239 Station User’s Guide Introducing The Telephone Your system may be programmed to provide an intercom dial tone when you lift the handset. This arrangement is known as “prime intercom.” Your telephone may, however, be programmed to provide outside line dial tone instead. This arrangement is known as “prime line automatic” or “idle line preference.” The instructions included herein are written for telephones with “prime intercom,” which means that you can dial the system feature codes as...
Page 4
l To answer a night-transfer call 1. hear ringing (loud ringer, night transfer station, etc.), 2. lift handset and listen for intercom dial tone, 3. dial 80, 4. answer call. Making Intercom Calls l With intercom as prime line: 1. lift handset and listen for intercom dial tone, 2. dial station extension number. l With outside line as prime line or idle line preference: 1. lift handset and listen for outside line dial tone, 2. press and release hookswitch (flash), or press TAP button, and...
Page 5
GCA 70-239 Station User’s Guide l To send a hookflash signal over the outside line during a call, 1. press and release hookswitch (flash), or press TAP if available, 2. listen for intercom dial tone, 3. dial # 04, 4. listen for host system reply. Speed Dialing l With intercom as prime line, NOTE: The installer must configure your station with idle line pref- erence for this feature to work properly since the last line used could be busy and therefore not be available for use when needed. 1....
Page 6
Redialinla The Last Number l With intercom as prime line: NOTE: The installer must configure your station with idle lineprefer- ence for this feature to work properly since the last line used could be busy and therefore not be available for use when needed. 1. lift handset and listen for intercom dial tone, 2. press and release hookswitch (flash), or press TAP button if available (dial tone will stop), 3. dial # for last number redial. l With outside line as prime line or idle line preference:...
Page 7
GCA 70-239 Station User’s Guide Parking Calls l To park an outside call for retrieval, 1. while on line, press and release hookswitch (flash), or press TAP button, if available (outside call is placed on hold and intercom dial tone sounds), 2. dial +%:, 3. dial park orbit access code (91- 99), 4. hangup. l To retrieve a parked call, 1. hear announcement of park orbit number, 2. pick up handset and listen for intercom dial tone, 3. dial M-99, 4. answer call. Using Screened Transfer l To...
Page 8
Using Unscreened Transfer l To transfer an outside call to a system station, 1. answer outside call, 2. press and release hookswitch (flash), or press TAP button if available (outside call is placed on hold automatically), 3. dial extension number of party to be transferred, 4. listen for ring back, 5. hang up handset. If transferred call is not answered after a pre- programmed length of time, it will ring back at your IST station. l To answer recall of transferred call, lift handset when you...
Page 9
GCA 70-239 Station User’s Guide Using LCD Messaging You can set system-supplied messages at your station to be displayed at an LCD speakerphone. l To turn on a message at your station, 1. lift handset and listen for intercom dial tone, 2. dial % 02, 3. dial message code number (0 through 9 -- see attendant for a list of available messages), 4. hang up handset. l To cancel message, press # 02. Using Station-to-Station Messaging If your station has Busy Lamp Field (BLF) appearance at another...
Page 10
Station User’s Guide GCA 70-239 l To send a call back message to someone’s Tracker Pager after receiving a ring-no-answer, 1. Make an intercom call to someone and receive no answer, 2. Press preprogrammed TRACK button (or dial #Ol), 3. After your station returns to idle* hang up handset or press SPEAKER to end. The Pager-Tracker system will transmit your station extension number to called party’s Tracker Pager display. (Some models will also display your station name if the system is programmed...