Cine Versum Cineversum Blackwing User Manual

4.0  FEATURES AND CONNECTIONS
R599727 - BlackWing User Manual21 
CAUTION AGAINST FIRE AND ELECTRIC SHOCK
Since the power consumption of this unit is high, insert the power plug directly into a wall outlet.
When not using devices, remove the power plug from the wall outlet.
Do not use power cords for connection other than specified.
Do not use a power voltage different from that which is indicated.
Do not cut, tear or modify the power cords. Also, do not place a heavy object on, heat or stretch the power...

5.0  BASIC OPERATIONS PROCEDURES
22R599727 - BlackWing User Manual
5.0 BASIC OPERATIONS PROCEDURES
5.1 First Startup
If setting for this unit is not completed, please refer to “ADJUSTMENTS AND SETTINGS”,  page 24 upon turning on
the power and perform the required setting accordingly. Once the basic setting is completed, this unit can be used
by simply performing the following operation procedures.
Removing the lens cap
Upon using, mount the lens cap to prevent soiling of the lens.
Turning on the power...

5.0  BASIC OPERATIONS PROCEDURES
R599727 - BlackWing User Manual23 
•Press the [HIDE] button again the restore the image.
Turning off the power
•Press the [OPERATE OFF] button for 1 second or more
The [OPERATE] indicator turns off, the [STAND BY] indicator starts blinking and this unit switches to the cool down
mode. The cool down mode will last for about 60 seconds to allow the temperature of the light source to cool off.
This unit switches to the standby mode at the end of the cool down mode.
•You can...

6.0  ADJUSTMENTS AND SETTINGS
24R599727 - BlackWing User Manual
6.0 ADJUSTMENTS AND SETTINGS
The menus displayed on the screen are used to perform adjustment and setting for this unit.
6.1 How to start up the menus
Box like menu structure
The menu structure is built up with boxes which allow easy access to different parameters for setting up the projec-
tor. A menu box item can generate an adjustment box on the right of the main menu.
How to activate the menu structure
•Press the [MENU] on the RCU or...

6.0  ADJUSTMENTS AND SETTINGS
R599727 - BlackWing User Manual25 
6.2 Menu Structure
6.3 Menu Configuration
Image Adjust Menu
•To adjust images.
a) Gamma
Switches the gradation characteristics of the image. Select your preference setting values according to the image to
be viewed.
b) Color Temp.
MAIN MENUSUBMENUAVAILABLE VALUES
Image Adjust MenuGamma Normal, A, B, Custom
Color Temp.D65, User1, User2
Test Pattern10 available test patterns *
Pixel AdjustH pixel adjust, V Pixel adjust
Setup MenuMenu Position9...

6.0  ADJUSTMENTS AND SETTINGS
26R599727 - BlackWing User Manual
Adjusts the color temperature of the projected image.
c) Red,Green,Blue
When you set the Color Temp. setting to User1 or User2, adjustment of Red,Green,Blue can be done.
d) Test Pattern
Use this to adjust focus, screen size or picture quality. There are 10 types of test patterns. Press the [ENTER] or
[TEST] button to alter the test pattern to be projected.
Press the [EXIT] button twice to clear the test pattern.
e) Pixel Adjust
Fine-tunes...

6.0  ADJUSTMENTS AND SETTINGS
R599727 - BlackWing User Manual27 
Inverts image upside down.
e) Picture Shift
When projecting images with black bands at the top and bottom (cinema image), use this to move the image up or
down while retaining one of the black bands at the upper or lower end.
Option Menu
a) Menu Display
Adjusts the display duration of the menu screen.
The menu screen display will not disappear automatically when this is set to On. Press the [EXIT] button to clear the
menu screen.
b) Sleep...

6.0  ADJUSTMENTS AND SETTINGS
28R599727 - BlackWing User Manual
INPUT INFORMATION
When the input video signal is switched, a blue back image will appear for about 2 seconds.
When nothing is connected to the [DVI] terminal, or if there is no video signal, a No Signal DVI-D message will be
projected.
For a video signal that cannot be used with this unit, a Out of Range message will be projected.
Video input signals that can be used with this unit are 1080p48, 1080p50 and 1080p60 signals by DVI-D 

7.0  ADVANCED SETTINGS
R599727 - BlackWing User Manual29 
7.0 ADVANCED SETTINGS
7.1 Picture Shift setting
When projecting images with black bands at the top and bottom (cinema image), use this to move the image up or
down while retaining one of the black bands at the upper or lower end. The default value is 0 (Off) and can be set
from -30 to +30.
7.2 Screen Masking
Mask adjustment affects only the edges of the projected image and are used to frame the projected image on to the
screen and to hide or black...

7.0  ADVANCED SETTINGS
30R599727 - BlackWing User Manual
7.3 Input balance
Introduction to calibration
When transporting signals, there is always a risk of deterioration of the information contained in the signals. 
During the projector installation, a proper colour calibration is required to benefit a well balanced colorimetry.
Gamma settings
The Gamma correction factor can be set to Normal (default), A , B or Custom.
Gamma is the relationship between the color values of the data and the color values...