Christie Projector Roadie 4K35 User Manual
Have a look at the manual Christie Projector Roadie 4K35 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Indicates the presence of a hot surface. To avoid personal injury, always allow the projector to cool down for a minimum of 10 minutes before performing maintenance or service procedures. Indicates the presence of an electrical shock hazard. To avoid personal injury, always disconnect all power sources before performing maintenance or service procedures. Indicates the presence of an electrocution hazard. To avoid personal injury, always disconnect all power sources before performing maintenance or service procedures. Indicates the presence of moving fan blades. To avoid personal injury, keep hands clear and loose clothing tied back. Alw ays disconnect all power sources before performing maintenance or service procedures. Indicates exposure to bright light. To avoid personal injury, never look directly at the light source. Indicates the presence of an explosion hazard. To avoid personal injury, always disconnect all power sources and wear Christie appro ved protective clothing.Indicates the presence of a fire hazard. To avoid personal injury and property damage, always adhere to the instructions described in this manual. Always disconnect all power sources before performing maintenance or service procedures. See the product user manual for specific information and directions. See the product service manual for specific information and directions. Never look directly into the projector lens. The extremely high brightness can cause permanent ey e damage. Indicates possible optical radiation emitted from the product. Introduction Roadie 4K35 User Manual 11 020-101669-04 R ev. 1 (01-2016) Copyright
Indicates thermal radiation emitted from the product ma y cause burns. This label warns of a cross-connection hazard when installing multiple projectors at once. A fire hazard exists if a lamp power supply interlock cable is connected to a different projector than its lamp power cables. F or more information, see Adjust the projector tilt and level in the Installation and Setup chapter Light intensity hazard distance This projector has been classified as Risk Group 3 as per the IEC62471 standard due to possible hazardous optical and thermal r adiation being emitted.Warning! F ailure to comply with the following could result in serious injury .
Projection lens Part numberZone A (m) Zone B (m) 0.72:1 Roadie HB lens 113-104106-XX0 to 0.70.7+ 0.9:1 fixed lens 38-809071-XX0 to 0.80.8+ 1.13-1.31:1 HB zoom lens 129-104106-XX 0 to 1.21.2+ 1.31-1.63:1 HB zoom lens 129-105107-XX 0 to 1.51.5+ 1.63-2.17:1 HB zoom lens 129-106108-XX 0 to 2.02.0+ 1.98-2.71:1 HB zoom lens 129-107109-XX 0 to 2.52.5+ 2.71-3.89 HB zoom lens 129-108100-XX0 to 3.63.6+ 3.89-5.43:1 HB zoom lens 129-109101-XX 0 to 4.94.9+ 5.0-7.69:1 HB zoom lens 129-110103-XX 0 to 7.07.0+Projector overview The R oadie 4K35 is a professional quality, easy-to-use, split-body projector using Digital Light Processing (DLP
Key features Understand the important features of the projector .
List of components V erify all components were received with the projector.
Installation and Setup Learn how to install, connect, and optimiz e the projector display. Site requirements To safely install and operate the projector, the installation location must have restricted access for authorized personnel only and meet these minimum requirements. Physical operating environment Provides specifications for the operating environment.
ID Item Description G Shroud (optional) Covers the motorized lens mount assembly (two-pieces). H Projection lens A variety of lenses can be used with the Roadie 4K35. See Accessories (on page 80). I Air filter cover and air filter Filters the intake air before it circulates through the front compartment to cool the main electronics. See Replacingthelightengineairfilter (on page 57). J Input panel Provides a variety of ports for connecting external devices. See Connectingdevices (on page 30). K Connector box Provides connections for the DC lamp and communication cables.Lamp power supply components Learn the components of the lamp power supply .ID Item Description A Projector AC power outlet Powers the projector head. Do not use this outlet to power other devices. B Main LPS breaker Acts as a power switch, protecting the lamp power supply (LPS) against o ver-current conditions of 40A or more. C Projector Interlock and communication connections Provides communication between the projector and the LPS. Installation and Setup Roadie 4K35 User Manual 18 020-101669-04 R ev. 1 (01-2016) Copyright
ID Item Description D DC cable connectors Locking connectors for DC cables. These connectors are shipped separ ately and must be connected by an electrician. E DC lamp power cables Carries power from the LPS to the projection lamp. F Lamp breaker Acts as a power switch, protecting the LPS against over-current conditions of 50A or more. G Outlet breaker Acts as a power switch, protecting the projector electronics against o ver- current conditions of 15 A or more. H Power phase indicator lights Indicates the power on each of the three phases. I LPS power inlet Supplies power to the LPS. This connection must be wired by an electrician, according to local regulations. Related information Connectingthelamppowersupply (on page 20) Positioning the projector Position the projector in relation to the screen. 1. Position the projector at an appropriate throw distance (projector-to-screen distance) andvertical position. Ideally, center the projector with the screen. If space is limited, aim the projector slightly off-center. This increases side keystoning, but reduces the horizontal lens offset required. Keep the projector lens as perpendicular to the screen as possible, even if significantly above the screen center . When a particularly short throw distance combines with a wide screen, y ou may have to forfeit some aim and stay more perpendicular to the screen. In such cases, some lens offset can reduce the keystone distortion. 2. If using the Roadie 4K frame (P/N: 129-115108-XX), install the projector using the instructions provided with the frame. Installation and Setup Roadie 4K35 User Manual 19 020-101669-04 R ev. 1 (01-2016) Copyright
Connecting the lamp power supply Connect the lamp power supply to the projector head. Warning! F ailure to comply with the following could result in death or serious injury .