Christie Projector Mirage WU-L User Manual

Section 3: Operation
Mirage WU-L User Manual3-3020-100774-01 Rev. 2 (4-2012)
3.1.2 Wired Remote
You can convert the standard IR remote into a wired remote using the optional cable. Connect one end into the 
standard IR remote, and the other to the XLR connector labeled Remote on the Electronics Module. The 
wired remote is recommended when the lighting conditions are unsuitable for proper IR transmission. 
To use the wired remote, make sure that wired remote support is enabled on the projector the remote...

3-4Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012)
Section 3: Operation
The Best Auto Setup will be obtained under the following conditions:
•Input levels: It is best to have an image with saturated (very bright) colors.
•Phase: High contrast edges are needed.
To determine the active window size:
• Video images should have whites and blacks in the image.
• Wide range video images should have content (including white) that extends to all edges of the image.
Channel
Select a specific source setup...

Section 3: Operation
Mirage WU-L User Manual3-5020-100774-01 Rev. 2 (4-2012)
Number Keys
Press 1 to 9 to enter a value in a text box or to select a menu item. 
To enter a number greater than 9, press 
0 (zero) before pressing another number. For example, press 0 (zero) 
then 
2 to enter the number 12 as a menu selection. 
NOTE: When entering numbers in a text field, the 0 (zero) button acts as the number 
0 (zero). See Editing Text 
on page 3-9.
Help
Press 
HELP to display a list of context-sensitive...

3-6Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012)
Section 3: Operation
Within a Presentation: Press FUNC followed by 2 numbers to enable a 
specific color or colors in the display (see Figure 3-1). 
For example,   will display only red, and   will 
display green data. Eliminating one or more colors can help with certain 
diagnostics and setups, such as when accurately overlaying one image on top 
of another from stacked projectors. 
NOTE: Color enabling can also be implemented from numerous...

Section 3: Operation
Mirage WU-L User Manual3-7020-100774-01 Rev. 2 (4-2012)
3.2 Navigating the Menus
3.2.1 Main Menu
Most of the projector controls are accessed from within the 
projector menu system. There are several groups of related 
functions, with each group selectable from the Main Menu. 
Press 
MENU at any time to display the Main Menu. 
• Using the IR remote, enter the number corresponding to the 
Function menu you wish to access, such as 
2 for the Image 
Settings menu. Or use the 
UP/DOWN...

3-8Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012)
Section 3: Operation
3.2.3 The Global Icon
Menu options that include this icon, apply globally. Menu options without this icon apply to the 
selected channel only. 
3.2.4 Using Slidebars and Other Controls
Most of the function menus allow you to change settings by using slidebars, check boxes, and drop-down lists. 
Navigating options: 
• Enter the menu option number corresponding to the setting you wish to change (for example, press 
MENU 1 3 to...

Section 3: Operation
Mirage WU-L User Manual3-9020-100774-01 Rev. 2 (4-2012)
•Press the LEFT arrow key (backward) or the RIGHT arrow key (forward) to jump between pages in an extra 
long drop-down list. 
• While in a drop-down list, press 
EXIT to cancel any change.
3.2.5 Editing Text
Activate the Edit Window: To enter or edit text within a text field, highlight the desired menu option (such as 
a Channel name) and press 
ENTER to activate its adjacent edit window. Any previously entered text is...

3-10Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012)
Section 3: Operation
3.3 Using Inputs and Channels
The projector allows you to define, store, and recall up to 99 different channels (customized setups or 
configurations) for a variety of inputs. Each physical source connection (i.e., input at the projector) can have 
several different channels associated with it:
• Slot refers to an input card installed in the projector. There are 4 input card slots.
• Input refers to both the physical connector...

Section 3: Operation
Mirage WU-L User Manual3-11020-100774-01 Rev. 2 (4-2012)
With any of these methods, the image will be displayed according to the following:
With any of these methods, the image displays according to the following:
• If it is the first time you have used the source/input (or if you used the input, but did not define a channel by 
adjusting anything), the projector will recognize the new input signal based on its frequencies and polarities, 
automatically displaying an image according...

3-12Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012)
Section 3: Operation
Using A Channel
You can normally select a channel from the 
Channel Setup list at any time by pressing 
the 
CHANNEL key. If you want to hide a 
channel from appearing in this list, you must 
deselect the In Menu option (check box) for 
that channel. See Figure 3-7. If you wish to 
access the channel, press the 
CHANNEL key 
and enter its associated number. 
NOTES: 1) The current channel is 
highlighted in the channel list, or,...