Christie Projector Mirage S+14k User Manual
Have a look at the manual Christie Projector Mirage S+14k User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
OPTIONAL INPUT MODULES Roadster / Mirage S+ User’s Manual F-3 The Composite Video Input Module receives either composite video input signals from tape or disk players. Video inputs are 75 S terminated. Video outputs are provided for buffered loop-through to another display device. NOTES: 1) The S-video portion of this module is non-functional with this projector. Connect composite video signals only. 2) This module is not a decoder. Composite Video Features ◊ BNC connectors for composite RGB signals ◊ 4-pin mini-DIN connectors for S-Video signals (NOTE: non-functional) ◊ buffered loop-through video outputs The PC250 Analog Input Module receives analog RGB input signals from IBM PC compatibles or Macintosh computers. Video inputs are 75 S terminated. Video outputs are provided for buffered loop-through to another display device. PC250 Analog Features ◊ accepts VGA or MAC RGB video ◊ 15 pin D connectors for video ◊ active loop-through video outputs NOTES: This interface does not accept VGA and MAC signals simultaneously. The DVI Input Module can be installed to display digital video input signals conforming to the DVI (Digital Visual Interface) single-channel standard. Composite -Video Input Module 38-804608-x x PC250 Analog Input Module 38-804609-x x DVI Input Module 38-804635-xx
OPTIONAL INPUT MODULES F-4 Roadster / Mirage S+ User’s Manual Features ◊ Supports Digital Visual Interface (DVI) single-channel ◊ Supports VESA Extended Display Identification Data (EDID) ◊ Provides an active-loop-through using a DVI connector (conforming to the DVI Specification) The Serial Digital Input Module (SDI) accepts a serial digital 4:2:2 component video signal (YCbCr) via a single SERIAL IN BNC connector. The signal can loop through the SERIAL OUT BNC out to another device (such as another projector). Inputs are 75 S terminated. SDI Features ◊ accepts serial digital 4:2:2 component video (YCbCr) ◊ provides both a SERIAL IN and a SERIAL OUT BNC connector ◊ includes status LEDs for signal and error ◊ SMPTE 259M compatible Serial Digital Input Module 38-804602-xx
Index Roadster / Mirage S+ User’s Manual INDEX-1 3 , 3-35 3D Stereo Sync Delay, 3-34 3D Stereo Sync Locking, 3-34 3D Stereo Sync Select, 3-34 A AC Line Cord, 3-3 AC Power Requirements, 2-1, 2-26, 6-5 Active Input Window, 3-23 Adjusting Input Levels, 3-30 Advanced Image Settings Submenu, 3-31 Advanced Size and Position submenu, 3-23 Alignment Procedure, 2-9 Anamorphic, 3-22 Arrow Keys, 3-10 Aspect Ratio, 2-13. Auto Color Enable, 3-30 Auto Input Level, 3-29 Auto Key, 3-6 Auto Setup, 2-2, 3-6, 3-20 AutoSource Checkbox, 3-19 B Backlight, 3-39 Baud Rate, 2-24, 3-37 Best Quality, 3-48 Best Switching, 3-48 Blacklevels and Drives, 3-29 Blanking, 3-24 PIP, 3-24 Brightness, 6-1 Brightness Key, 3-8, 3-25 Brightness Uniformity Canceling, 3-59 Definition, 3-56 Prerequisites, 3-56 Procedure, 3-56 Submenu, 3-40 Brightness Uniformity Menu, 3-58 Broadcast Key, 3-39 Broadcasting, 3-10 Bubble Xenon Lamp. See Lamp C Channel Copy/Delete, 3-18 Locked, 3-19 Number, 3-16 Selection, 3-16 Signal Type, 3-17 Using, 3-16 Channel Key, 3-6, 3-15 Channel List Display, 3-37 Channel Setup Menu, 3-17 Enter Key, 3-18 Function Key, 3-17 Channels Creating Automatically, 3-16 Creating in Channel Setup Menu, 3-18 Definition of, 3-15 Deleting in Channel Setup Menu, 3-18 Edit Menu, 3-18 Name, 3-19 Number, 3-19 Checkbox Toggles, 3-13 ChristieNet, 3-64 Clamp Location, 3-30 Clamp Tip, 3-30 Cleaning Lamp, 4-3 Lens, 4-3 Codes, System Error, 3-67 Color Adjustment, 3-32, 3-41 Brightness Uniformity, 3-56 Color Saturation, 3-56 Color Saturation Submenu, 3-43 Preliminary Calibration, 3-53 Procedure, 3-53 XY Submenu, 3-42 Color Artifacts, 3-34 Color Enable, 3-30, 3-43 Color Matching, 3-53 Color Space Selecting, 3-26 Color Temperature, 3-32 Colors and Gray Scale, 6-1 Communications Connecting, 2-20 Ethernet, 2-21
INDEX INDEX-2 Roadster / Mirage S+ User’s Manual GPIO Port, 2-22 RS-232 Serial, 2-20 RS-422 Serial, 2-20 Submenu, 3-37 Component Video, 2-18 Components, 1-2 Location and Use, 3-1 Composite Video, 2-19 Configuration Menu, 3-35 Contrast, 3-25 Contrast Key, 3-8 Contrast Ratio, 6-1 Cross Talk, 3-34 Custom Sizing, 3-21 D Dark Interval, 3-33, 3-35 Date and Time Setting, 3-36 Decoder AGC Enabling, 3-27 Decoder Luma Delay, 3-28 Define Custom Color Gamuts, 3-41 Detail Image Sharpness, 3-26 Detail Threshold, 3-35 Diagnostics and Calibration, Submenu, 3-43 Display Channel List, 3-37 Error Messages, 3-37 Slidebars, 3-37 DMD, 3-60 Dual SD/HD-SDI Input Module, 2-19 E Edge Blending, 3-40 Description, 3-60 How Blends are Used, 3-60 Main Functions, 3-61 Procedure, 3-62 Submenu, 3-40 Enter Key, 3-10 Error Code Window, 3-3 Error Codes, System, 3-67 Error Messages, 3-64 Bad Sync, 3-65 H-Sync or V-Sync, 3-65 Invalid User Entry, 3-65 No Signal, 3-65 System Warnings/Errors, 3-65 Ethernet, 6-4. See Communications Control of TPC, 3-64 Troubleshooting, 5-4 Ethernet Network, 2-24 Ethernet Settings Submenu, 3-39 Exit Key, 3-10 F Film Mode Threshold, 3-35 Filter Replacement Procedure, 4-8 Replacement Schedule, 4-2 Filter (Image Adjustment), 3-26 Flying Projector. See Projector, Hoisting Focus, 2-2, 2-3, 2-28, 3-2 Folded Optics, 2-16 Font Size, Menu, 3-36 Foreign Objects, Dangers of, 4-3 , 3-35 Frame Delay and Monitor, 3-33 Frame Locking, 3-34 Freeze Image, 3-43 Full Height, 3-22 Full Screen, 3-22 Full Width, 3-22 Function Key, 3-9 G Gamma Curve, 3-32 Gamma Key, 3-8, 3-25 Gamma Table, 3-25, 3-32 Gamma, Description of, 3-8, 3-25 Geometry and Color, Submenu, 3-40 Glossary of Terms, 1 GPIO, 2-22, 6-4 H Handles, 3-2 Safety of, 2-3 Help Context-sensitive, 3-11 From presentation level, 3-12 Hoisting Hardware:, 2-3 Procedure, 2-5 Horizontal Offset, 2-15 Adjusting, 3-2 Horizontal Position, 3-23 I Image Adjustments, 3-20 Orientation, 2-27 Image Optimization, 3-48 Image Orientation, 3-36 Image Settings Menu, 3-25 Infrared Sensors, 3-4 InMenu Checkbox, 3-19 Input Definition of, 3-14 Selecting/Switching, 3-15 Settings, Advanced, 3-32 Input Keys, 3-7 Input Level, Auto, 3-29 Input Levels Submenu, 3-29 Input Panel, 3-2 Input Saturation Color Level, 3-28 Input Tint, 3-28 Input Video Black, 3-28 Inputs, 2-17, 6-3 Dual SD/HD-SDI, 6-3 DVI-I, 6-3
INDEX Roadster / Mirage S+ User’s Manual INDEX-3 Number and Type, 6-2 Optional, 2-19 Inputs, Analog RGB/YPbPr, 6-2 Sync, 6-3 Video, 6-3 Installation Ambient Lighting, 2-13 Ceiling Mounting, 2-16 Front Screen, 2-12 Horizontal Position, 2-15 Other Considerations, 2-13 Rear Screen, 2-12 Screen Size, 2-13 ScreenAspect Ratio, 2-13 Type, 2-11 Vertical Position, 2-15 Intensity Setting for Lamp, 3-50 , 3-35 Invalid Channel, 3-65 Invalid User Entry. See Error Messages IP Address, 3-39 Setting, 2-25 IR Sensors, 3-39 K Keypad Accessing Menus, 3-11 Built-in, 3-4 Conversion, 2-28 Enabling Wire Remote, 3-39 Guide lines, 3-6 IR Remote, 2-20, 3-5, 6-4 Remapping, 3-49 Replacing Batteries, 4-4 Types, 3-4 Wired Remote, 3-4, 3-6, 6-4 Keystone, 2-15, 2-27 Correcting, 3-40 L Labels and Markings, 4-1 Lamp Cleaning, 4-3 Cool Down, 4-2 Failure to Ignite, 5-3 History, 3-51 Hours, 3-49, 4-4 Hours, 3-52 Limit, 3-49, 3-52, 4-2 Maintaining Brightness, 3-51 Mainting Brightness, 3-56 Menu, 3-49 Message, 3-49 Replacement Procedure, 4-4 Replacement Schedule. See Lamp Limit Serial Number, 3-49, 3-51, 4-7 Set Power, 3-57 Specs, 6-6 Troubleshooting, 5-3 Lamp Modes, 3-50 Intensity, 3-50 Max Brightness, 3-50 Power, 3-50 Language Select, 3-36 Laser Key, 3-10 LCD Status Display Window, 3-3 LED, Status Codes, 3-66 Lens Adjustments, 2-2 Cleaning, 4-3 List & Specifications, 6-2 Offset, 3-2 Replacement Procedure, 4-8 Lens Focus Keys, 3-10 Lens Release, 3-1 Level Value, 3-45 Leveling, 2-27 Special Mounting, 2-16 Lifting Projector, 2-3 Line Cord, AC, 3-3 LiteLOC Troubleshooting, 5-3 LiteLOC Calibration, 3-45 Locked Channel Checkbox, 3-19 Logo Replacement, 3-37 Luma Delay, 3-28 Lumens. See Brightness M Menu, 3-11 Channel Setup, 3-17 Color Saturation, 3-56 Configuration, 3-35 Image Settings, 3-25 Lamp, 3-49 PIP and Switching, 3-47 Simulation 3D, 3-33 Size and Position, 3-20 Status, 3-52 Test Pattern, 3-40 White Uniformity, 3-58 Menu Font Size, 3-36 Menu Key, 3-8 Menu Location on Screen, 3-36 Menu Navigation, 3-11, 3-20 Menu Preferences Submenu, 3-36 Mixed Networks, 2-23 Motion Filter, 3-35 Multiple Projectors Connecting, 2-23 Description, 3-53 N Network Routing, 3-38 Network, Split. See Split Network No Resizing, 3-21 No Signal, 3-65 Noise Reduction, 3-26 Non-operating Environment, 6-6 Numerical Entry, 3-14
INDEX INDEX-4 Roadster / Mirage S+ User’s Manual O Odd Pixel Adjustment, 3-44 Level Detector, 3-45 Offset Horizontal, 2-15 Vertical, 2-15 On-Line Help. See Help Operating Environment, 6-6 Optical Aperture, 3-33 Option, 3-45 Optional Inputs, 2-19 OSD Key, 3-8 P Panel Input, 3-2 Peak Detector, 3-30, 3-45 PIP, 3-46 Aspect Ratio Presets, 3-47 Blanking, 3-24 Border Color, 3-48 Border Width, 3-48 Compatible Signals, 3-46 Enable, 3-47 Image Settings. See Image Settings Menu Position Presets, 3-47 Primary Image, 3-46 Secondary Image, 3-46 Size and Position Submenu, 3-47 Swap Main and PIP Image, 3-47 PIP Key, 3-9 Pixel Phase, 3-23 Pixel Tracking, 3-22 Plug & Display (EDID), 3-24 Port Number Changing, 2-25 Entering, 3-39 Power, 2-1 Setting for Lamp, 3-50 Power Cords and Attachments, Safety, 4-2 Power Key, 3-6 Power Requirements. See AC Power Power-up Auto, 3-36 Presets, Resizing, 3-21 Primary Colors, Adjusting, 3-53 Primary Image, 3-46 Projector Assigning/Changing Number, 3-38 Components, 1-2, 3-1, 6-7 Dimensions, 6-6 Hoisting, 2-5 Number, 3-14 Position and Mounting, 2-27 Resetting, 3-66 Safe Location of, 4-1 Projector Features, 1-1 Projector Key, 3-9 Projector Set Up Quick, 2-1 Pull-Down Lists, Use of, 3-13 Purchase Record, 1-3 Q Quick Set Up, 2-1 R Resizing, 3-21 Default, 3-21 Resolution, 6-1 RGB Connection, 3-2 Sources, 2-17 Rigging Hardware, Attaching, 2-6 RS-232 Network, 2-23 Serial Communications, 2-20 Serial Interface, 3-3 Specifications, 6-4 RS-422 Interface, 3-3 Serial Communications, 2-20 Specifications, 6-4 S Safety Cables, 2-5 Screen Diffused, 2-12 Optical, 2-12 Size, 2-13, 2-14 Seamless Switching, 3-48 Compatible Signals, 3-46 Definition, 3-48 Fade Time, 3-48 Image Optimization, 3-48 Secondary Image, 3-46 Servicing Conditions Requiring Servicing, 4-3 Setting RGB Levels, 3-29 Shutter, 3-2 Shutter Key, 3-9 Simulation 3D Menu, 3-33 Size, 3-22 Size and Position Menu, 3-20 Slidebars ”Direct”, 3-13, 3-20 Adjustment, 3-12 Using, 3-12 Source Selection, 2-2 Source Setup. See Channel Splash Screen Setup, 3-37 Split Network, 3-38 Split Networks Options for Setup, 2-25 Stacking, 2-6 Leg Nuts, 2-7 Legs, 2-7 Mounts, 2-6 Procedure, 2-6 Safety Pins, 2-8 Status Codes, LED, 3-66 Status LED, 3-3 Status Menu, 3-52 S-Video, 2-19
INDEX Roadster / Mirage S+ User’s Manual INDEX-5 Switch/Breaker, 3-3 Switcher, 3-19 Sync Def. and types, 6 System Error Codes, 3-67 System Warning Message, 3-66 T Test Key, 3-6 Test Pattern, 3-40 Test Pattern Grey Level, 3-43 Text Editing, 3-13 Characters, 3-14 Navigation, 3-13 Numerical Values, 3-14 Throw Distance, 2-1, 2-14 Definition, 2-14 Time-outs, 3-12 Troubleshooting Ethernet, 5-4 Lamp, 5-3 Power, 5-1 V Ventilation, Importance of, 4-3 Vertical Offset Adjusting, 3-2 Vertical Position, 2-14, 3-23 Vertical Stretch, 3-22 Video, 3-2 Video Options, 3-27 Video Standards, 3-27 Voltmeter, 3-3 W Warnings, 4-1 White Uniformity Menu, 3-58, 3-59 White Uniformity Slidebars, 3-57 Y YPbPr, 3-26 Connecting, 2-18 Z Zoom, 2-2, 3-1 Zoom Keys, 3-10